- NetBSD Manual Pages
SM(4) NetBSD Kernel Interfaces Manual SM(4)
Powered by man-cgi (2020-09-24).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
sm -- SMC91Cxx-based Ethernet interfaces device driver
sm0 at ifpga0 addr 0xb8000000 irq 27
sm0 at isa? port 0x300 irq 10
sm* at mhzc?
sm* at pcmcia? function ?
sm* at nubus?
The sm device driver supports SMC91C9x-based and SMC91C1xx-based Ethernet
The ifpga0 attachment of the sm driver supports SMC91C9x-based Ethernet
interface on the ARM Integrator/CP board.
The ISA attachment of the sm driver supports any SMC91C9x-based Ethernet
interface on the ISA bus, including the EFA Info*Express SVC VLB inter-
face, and the on-board SMC91C9x Ethernet found in many embedded PCs and
laptop docking stations.
The mhzc attachment of the sm driver supports the Megahertz combo Ether-
net and modem card.
The PCMCIA attachment of the sm driver supports Megahertz X-JACK Ethernet
The nubus attachment of the sm driver supports SMC-based Ethernet cards
for the macintosh.
The SMC91C1xx supports the MII interface and so the list of supported
media depends on several factors, including which PHY is attached. The
SMC91C9x supports AUI and UTP media types.
To enable the AUI media, select the 10base5 or aui media type with
ifconfig(8)'s media directive. To select UTP, select the 10baseT or utp
ifconfig(8)'s -m option will display the full list of supported media
directives for a particular configuration.
sm0: unable to read MAC address from CIS This indicates that the Ether-
net address, which is stored in the CIS information on the Megahertz X-
JACK PCMCIA Ethernet card, is corrupted.
ifmedia(4), intro(4), isa(4), mhzc(4), mii(4), pcmcia(4), ifconfig(8)
NetBSD 9.99 September 6, 2017 NetBSD 9.99