- NetBSD Manual Pages
GPIOOW(4) NetBSD Kernel Interfaces Manual GPIOOW(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
gpioow -- 1-Wire bus bit-banging through GPIO pin
gpioow* at gpio? offset 0 mask 0x1
gpioow* at gpio?
onewire* at gpioow?
The gpioow driver allows bit-banging a 1-Wire bus as a master using one
GPIO pin. The pin is used as a data signal. The GPIO pin must be able
to drive an output and read an input.
The pin number is specified in the kernel configuration with the offset
locator. The mask locator should always be 0x1. The offset and mask can
also be specified when gpioow is attached at runtime using the GPIOATTACH
ioctl(2) on the gpio(4) device.
gpio(4), intro(4), onewire(4)
The gpioow driver first appeared in OpenBSD 4.0 and NetBSD 4.0.
The gpioow driver was written by Alexander Yurchenko <firstname.lastname@example.org>
and was ported to NetBSD by Jeff Rizzo <riz@NetBSD.org>.
NetBSD 9.99 July 19, 2009 NetBSD 9.99