- NetBSD Manual Pages
ONEWIRE(4) NetBSD Kernel Interfaces Manual ONEWIRE(4)
Powered by man-cgi (2021-03-02).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
onewire -- 1-Wire bus
onewire* at gpioow?
1-Wire bus was originally developed by Dallas Semiconductor for connect-
ing integrated circuits. It is commonly used for connecting devices such
as electronic keys, EEPROMs, temperature sensors, real-time clocks, secu-
rity chips, etc.
The onewire driver provides a uniform programming interface layer between
1-Wire master controllers and various 1-Wire slave devices. Each 1-Wire
master controller attaches a onewire framework; several slave devices can
then be attached to the onewire bus.
The driver supports plugging and unplugging slave devices on the fly.
gpioow(4) 1-Wire bus bit-banging through GPIO pin
owtemp(4) temperature family type device
The onewire driver first appeared in OpenBSD 4.0 and NetBSD 4.0.
The onewire driver was written by Alexander Yurchenko
<firstname.lastname@example.org> and ported to NetBSD by Jeff Rizzo <riz@NetBSD.org>.
NetBSD 9.99 April 4, 2006 NetBSD 9.99