npf(3) - NetBSD Manual Pages

NPF(3)                  NetBSD Library Functions Manual                 NPF(3)


NAME
npf -- NPF packet filter library
LIBRARY
library ``libnpf''
SYNOPSIS
#include <npf.h> nl_config_t * npf_config_create(void); int npf_config_submit(nl_config_t *ncf, int fd); void npf_config_destroy(nl_config_t *ncf); int npf_config_flush(int fd); nl_rule_t * npf_rule_create(char *name, uint32_t attr, u_int if_idx); int npf_rule_setcode(nl_rule_t *rl, int type, const void *code, size_t len); int npf_rule_setkey(nl_rule_t *rl, int type, const void *code, size_t len); bool npf_rule_exists_p(nl_config_t *ncf, const char *name); int npf_rule_insert(nl_config_t *ncf, nl_rule_t *parent, nl_rule_t *rl); int npf_rule_setprio(nl_rule_t *rl, pri_t pri); int npf_rule_setproc(nl_config_t *ncf, nl_rule_t *rl, const char *name); void npf_rule_destroy(nl_rule_t *rl); nl_rproc_t * npf_rproc_create(char *name); bool npf_rproc_exists_p(nl_config_t *ncf, const char *name); int npf_rproc_insert(nl_config_t *ncf, nl_rproc_t *rp); nl_nat_t * npf_nat_create(int type, u_int flags, u_int if_idx, npf_addr_t *addr, int af, in_port_t port); int npf_nat_insert(nl_config_t *ncf, nl_nat_t *nt, pri_t pri); nl_table_t * npf_table_create(u_int id, int type); int npf_table_add_entry(nl_table_t *tl, int af, in_addr_t addr, in_addr_t mask); bool npf_table_exists_p(nl_config_t *ncf, u_int tid); int npf_table_insert(nl_config_t *ncf, nl_table_t *tl); void npf_table_destroy(nl_table_t *tl);
DESCRIPTION
The npf library provides an interface to create an NPF configuration hav- ing rules, tables, procedures, or translation policies. The configura- tion can be submitted to the kernel.
FUNCTIONS
Configuration npf_config_create() Create a configuration. npf_config_submit(ncf, fd) Submit configuration ncf to the kernel. npf_config_destroy(ncf) Destroy the configuration ncf. npf_config_flush(fd) Flush the current configuration. Rule interface npf_rule_create(name, attr, if_idx) Create a rule with a given name, attribute and priorty. Name can be NULL, in which case rule has no unique identifier. Otherwise, rules shall not have duplicate names. The following attributes, which can be ORed, are available: NPF_RULE_PASS Decision of this rule is "pass". If this attribute is not specified, then packet "block" (drop) is the default. NPF_RULE_FINAL Indicates that on rule match, further processing of the ruleset should be stopped and this rule applied instantly. NPF_RULE_STATEFUL Create a state (session) on match, track the connection and therefore pass the backwards stream without inspection. NPF_RULE_RETRST Return TCP RST packet in a case of packet block. NPF_RULE_RETICMP Return ICMP destination unreachable in a case of packet block. NPF_RULE_IN Rule may match only if incoming packet. NPF_RULE_OUT Rule may match only if outgoing packet. Interface is specified by if_idx, which is a numeral representation of an interface, given by if_nametoindex(3). Zero indicates any interface. npf_rule_setcode(rl, type, code, len) Assign compiled code for the rule specified by rl, used for filter criteria. Pointer to the binary code is specified by code, and size of the memory area by len. Type of the code is specified by type. Currently, only n-code is supported and NPF_CODE_NC should be passed. npf_rule_setkey(rl, type, key, len) Assign a key for the rule specified by rl. Binary key is specified by key, and its size by len. The size shall not exceed NPF_RULE_MAXKEYLEN. npf_rule_insert(ncf, parent, rl) Insert the rule into the set of parent rule specified by parent. If value of parent is NULL, then insert into the main ruleset. npf_rule_setprio(rl, pri) Set priority to the rule. Negative priorities are invalid. Priority is the order of the rule in the ruleset. Lower value means first to process, higher value - last to process. If multi- ple rules are inserted with the same priority, the order is unspec- ified. The special constants NPF_PRI_FIRST and NPF_PRI_LAST can be passed to indicate that the rule should be inserted into the beginning or the end of the priority level 0 in the ruleset. All rules inserted using these constants will have the priority 0 assigned and will share this level in the ordered way. npf_rule_setproc(ncf, rl, name) Set a procedure for the specified rule. npf_rule_destroy(rl) Destroy the given rule. Rule procedure interface npf_rproc_create(name) Create a rule procedure with a given name. Name must be unique for each procedure. npf_rproc_insert(ncf, rp) Insert rule procedure into the specified configuration. Translation interface npf_nat_create(type, flags, if_idx, addr, af, port) Create a NAT translation policy of a specified type. There are two types: NPF_NATIN Inbound NAT policy. NPF_NATOUT Outbound NAT policy. A bi-directional NAT is obtained by combining two policies. The following flags are supported: NPF_NAT_PORTS Indicates to perform port translation. Other- wise, port translation is not performed and port is ignored. NPF_NAT_PORTMAP Effective only if NPF_NAT_PORTS flag is set. Indicates to create a port map and select a ran- dom port for translation. Otherwise, port is translated to the value specified by port is used. Translation address is specified by addr, and its family by af. Family must be either AF_INET for IPv4 or AF_INET6 for IPv6 address. npf_nat_insert(ncf, nt, pri) Insert NAT policy, its rule, into the specified configuration. Table interface npf_table_create(index, type) Create NPF table of specified type. The following types are sup- ported: NPF_TABLE_HASH Indicates to use hash table for storage. NPF_TABLE_TREE Indicates to use red-black tree for storage. Ta- ble is identified by index, which should be in the range between 1 and NPF_MAX_TABLE_ID. npf_table_add_entry(tl, af, addr, mask) Add an entry of IP address and mask, specified by addr and mask, to the table specified by tl. Family, specified by af, must be either AF_INET for IPv4 or AF_INET6 for IPv6 address. npf_table_exists_p(ncf, name) Determine whether table with ID tid exists in the configuration ncf. Return true if exists, and false otherwise. npf_table_insert(ncf, tl) Insert table into set of configuration. Routine performs a check for duplicate table ID. npf_table_destroy(tl) Destroy the specified table.
SEE ALSO
npfctl(8), npf_ncode(9)
HISTORY
The NPF library first appeared in NetBSD 6.0. NetBSD 6.1 January 5, 2013 NetBSD 6.1

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.