vget(9) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
VNODE(9)               NetBSD Kernel Developer's Manual               VNODE(9)

vnode, vcount, vref, VREF, vrele, vget, vput, vhold, VHOLD, holdrele, HOLDRELE, getnewvnode, ungetnewvnode, vrecycle, vgone, vgonel, vflush, vaccess, checkalias, bdevvp, cdevvp, vfinddev, vdevgone, vwakeup, vflushbuf, vinvalbuf, vtruncbuf, vprint -- kernel representation of a file or directory
#include <sys/param.h> #include <sys/vnode.h> int vcount(struct vnode *vp); void vref(struct vnode *vp); void VREF(struct vnode *vp); void vrele(struct vnode *vp); int vget(struct vnode *vp, int lockflag); void vput(struct vnode *vp); void vhold(struct vnode *vp); void VHOLD(struct vnode *vp); void holdrele(struct vnode *vp); void HOLDRELE(struct vnode *vp); int getnewvnode(enum vtagtype tag, struct mount *mp, int (**vops)(void *), struct vnode **vpp); void ungetnewvnode(struct vnode *vp); int vrecycle(struct vnode *vp, struct simplelock *inter_lkp, struct lwp *l); void vgone(struct vnode *vp); void vgonel(struct vnode *vp, struct lwp *l); int vflush(struct mount *mp, struct vnode *skipvp, int flags); int vaccess(enum vtype type, mode_t file_mode, uid_t uid, gid_t gid, mode_t acc_mode, kauth_cred_t cred); struct vnode * checkalias(struct vnode *vp, dev_t nvp_rdev, struct mount *mp); int bdevvp(dev_t dev, struct vnode **vpp); int cdevvp(dev_t dev, struct vnode **vpp); int vfinddev(dev_t dev, enum vtype, struct vnode **vpp); void vdevgone(int maj, int minl, int minh, enum vtype type); void vwakeup(struct buf *bp); void vflushbuf(struct vnode *vp, int sync); int vinvalbuf(struct vnode *vp, int flags, kauth_cred_t cred, struct lwp *l, int slpflag, int slptimeo); int vtruncbuf(struct vnode *vp, daddr_t lbn, int slpflag, int slptimeo); void vprint(const char *label, struct vnode *vp);
The vnode is the focus of all file activity in NetBSD. There is a unique vnode allocated for each active file, directory, mounted-on file, fifo, domain socket, symbolic link and device. The kernel has no concept of a file's underlying structure and so it relies on the information stored in the vnode to describe the file. Thus, the vnode associated with a file holds all the administration information pertaining to it. When a process requests an operation on a file, the vfs(9) interface passes control to a file system type dependent function to carry out the operation. If the file system type dependent function finds that a vnode representing the file is not in main memory, it dynamically allocates a new vnode from the system main memory pool. Once allocated, the vnode is attached to the data structure pointer associated with the cause of the vnode allocation and it remains resident in the main memory until the system decides that it is no longer needed and can be recycled. The vnode has the following structure: struct vnode { struct uvm_object v_uobj; /* uvm object */ #define v_usecount v_uobj.uo_refs #define v_interlock v_uobj.vmobjlock voff_t v_size; /* size of file */ int v_flag; /* flags */ int v_numoutput; /* num pending writes */ long v_writecount; /* ref count of writers */ long v_holdcnt; /* page & buffer refs */ struct mount *v_mount; /* ptr to vfs we are in */ int (**v_op)(void *); /* vnode ops vector */ TAILQ_ENTRY(vnode) v_freelist; /* vnode freelist */ LIST_ENTRY(vnode) v_mntvnodes; /* vnodes for mount pt */ struct buflists v_cleanblkhd; /* clean blocklist head */ struct buflists v_dirtyblkhd; /* dirty blocklist head */ LIST_ENTRY(vnode) v_synclist; /* dirty vnodes */ LIST_HEAD(, namecache) v_dnclist; /* namecaches for children */ LIST_HEAD(, namecache) v_nclist; /* namecaches for our parent */ union { struct mount *vu_mountedhere;/* ptr to mounted vfs */ struct socket *vu_socket; /* unix ipc (VSOCK) */ struct specinfo *vu_specinfo; /* device (VCHR, VBLK) */ struct fifoinfo *vu_fifoinfo; /* fifo (VFIFO) */ } v_un; #define v_mountedhere v_un.vu_mountedhere #define v_socket v_un.vu_socket #define v_specinfo v_un.vu_specinfo #define v_fifoinfo v_un.vu_fifoinfo struct nqlease *v_lease; /* Soft ref to lease */ enum vtype v_type; /* vnode type */ enum vtagtype v_tag; /* underlying data type */ struct lock v_lock; /* lock for this vnode */ struct lock *v_vnlock; /* ptr to vnode lock */ void *v_data; /* private data for fs */ struct klist v_klist; /* knotes attached to vnode */ }; Most members of the vnode structure should be treated as opaque and only manipulated using the proper functions. There are some rather common exceptions detailed throughout this page. Files and file systems are inextricably linked with the virtual memory system and v_uobj contains the data maintained by the virtual memory sys- tem. For compatibility with code written before the integration of uvm(9) into NetBSD, C-preprocessor directives are used to alias the mem- bers of v_uobj. Vnode flags are recorded by v_flag. Valid flags are: VROOT This vnode is the root of its file system. VTEXT This vnode is a pure text prototype. VSYSTEM This vnode is being used by the kernel; only used to skip quota files in vflush(). VISTTY This vnode represents a tty; used when reading dead vnodes. VEXECMAP This vnode has executable mappings. VWRITEMAP This vnode might have PROT_WRITE user mappings. VWRITEMAPDIRTY This vnode might have dirty pages due to VWRITEMAP VLOCKSWORK This vnode's file system supports locking. VXLOCK This vnode is currently locked to change underlying type. VXWANT A process is waiting for this vnode. VBWAIT Waiting for output associated with this vnode to com- plete. VALIASED This vnode has an alias. VDIROP This vnode is involved in a directory operation. This flag is used exclusively by LFS. VLAYER This vnode is on a layered file system. VONWORKLST This vnode is on syncer work-list. VFREEING This vnode is being freed. VMAPPED This vnode might have user mappings. The VXLOCK flag is used to prevent multiple processes from entering the vnode reclamation code. It is also used as a flag to indicate that reclamation is in progress. The VXWANT flag is set by threads that wish to be awakened when reclamation is finished. Before v_flag can be modi- fied, the v_interlock simplelock must be acquired. See lock(9) for details on the kernel locking API. Each vnode has three reference counts: v_usecount, v_writecount and v_holdcnt. The first is the number of active references within the ker- nel to the vnode. This count is maintained by vref(), vrele(), and vput(). The second is the number of active references within the kernel to the vnode performing write access to the file. It is maintained by the open(2) and close(2) system calls. The third is the number of refer- ences within the kernel requiring the vnode to remain active and not be recycled. This count is maintained by vhold() and holdrele(). When both the v_usecount and v_holdcnt reach zero, the vnode is recycled to the freelist and may be reused for another file. The transition to and from the freelist is handled by getnewvnode(), ungetnewvnode() and vrecycle(). Access to v_usecount, v_writecount and v_holdcnt is also protected by the v_interlock simplelock. The number of pending synchronous and asynchronous writes on the vnode are recorded in v_numoutput. It is used by fsync(2) to wait for all writes to complete before returning to the user. Its value must only be modified at splbio (see spl(9)). It does not track the number of dirty buffers attached to the vnode. v_dnclist and v_nclist are used by namecache(9) to maintain the list of associated entries so that cache_purge(9) can purge them. The link to the file system which owns the vnode is recorded by v_mount. See vfsops(9) for further information of file system mount status. The v_op pointer points to its vnode operations vector. This vector describes what operations can be done to the file associated with the vnode. The system maintains one vnode operations vector for each file system type configured into the kernel. The vnode operations vector con- tains a pointer to a function for each operation supported by the file system. See vnodeops(9) for a description of vnode operations. When not in use, vnodes are kept on the freelist through v_freelist. The vnodes still reference valid files but may be reused to refer to a new file at any time. When a valid vnode which is on the freelist is used again, the user must call vget() to increment the reference count and retrieve it from the freelist. When a user wants a new vnode for another file, getnewvnode() is invoked to remove a vnode from the freelist and initialize it for the new file. The type of object the vnode represents is recorded by v_type. It is used by generic code to perform checks to ensure operations are performed on valid file system objects. Valid types are: VNON The vnode has no type. VREG The vnode represents a regular file. VDIR The vnode represents a directory. VBLK The vnode represents a block special device. VCHR The vnode represents a character special device. VLNK The vnode represents a symbolic link. VSOCK The vnode represents a socket. VFIFO The vnode represents a pipe. VBAD The vnode represents a bad file (not currently used). Vnode tag types are used by external programs only (e.g., pstat(8)), and should never be inspected by the kernel. Its use is deprecated since new v_tag values cannot be defined for loadable file systems. The v_tag mem- ber is read-only. Valid tag types are: VT_NON non file system VT_UFS universal file system VT_NFS network file system VT_MFS memory file system VT_MSDOSFS FAT file system VT_LFS log-structured file system VT_LOFS loopback file system VT_FDESC file descriptor file system VT_PORTAL portal daemon VT_NULL null file system layer VT_UMAP uid/gid remapping file system layer VT_KERNFS kernel interface file system VT_PROCFS process interface file system VT_AFS AFS file system VT_ISOFS ISO 9660 file system(s) VT_UNION union file system VT_ADOSFS Amiga file system VT_EXT2FS Linux's EXT2 file system VT_CODA Coda file system VT_FILECORE filecore file system VT_NTFS Microsoft NT's file system VT_VFS virtual file system VT_OVERLAY overlay file system VT_SMBFS SMB file system VT_PTYFS pseudo-terminal device file system VT_TMPFS efficient memory file system VT_UDF universal disk format file system VT_SYSVBFS systemV boot file system All vnode locking operations use v_vnlock. This lock is acquired by calling vn_lock(9) and released by calling VOP_UNLOCK(9). The reason for this asymmetry is that vn_lock(9) is a wrapper for VOP_LOCK(9) with extra checks, while the unlocking step usually does not need additional checks and thus has no wrapper. The vnode locking operation is complicated because it is used for many purposes. Sometimes it is used to bundle a series of vnode operations (see vnodeops(9)) into an atomic group. Many file systems rely on it to prevent race conditions in updating file system type specific data struc- tures rather than using their own private locks. The vnode lock can operate as a multiple-reader (shared-access lock) or single-writer lock (exclusive access lock), however many current file system implementations were written assuming only single-writer locking. Multiple-reader lock- ing functions equivalently only in the presence of big-lock SMP locking or a uni-processor machine. The lock may be held while sleeping. While the v_vnlock is acquired, the holder is guaranteed that the vnode will not be reclaimed or invalidated. Most file system functions require that you hold the vnode lock on entry. See lock(9) for details on the kernel locking API. For leaf file systems (such as ffs, lfs, msdosfs, etc), v_vnlock will point to v_lock. For stacked file systems, v_vnlock will generally point to v_vlock of the lowest file system. Additionally, the implementation of the vnode lock is the responsibility of the individual file systems and v_vnlock may also be NULL indicating that a leaf node does not export a lock for vnode locking. In this case, stacked file systems (such as nullfs) must call the underlying file system directly for locking. Each file system underlying a vnode allocates its own private area and hangs it from v_data. Most functions discussed in this page that operate on vnodes cannot be called from interrupt context. The members v_numoutput, v_holdcnt, v_dirtyblkhd, v_cleanblkhd, v_freelist, and v_synclist are modified in interrupt context and must be protected by splbio(9) unless it is certain that there is no chance an interrupt handler will modify them. The vnode lock must not be acquired within interrupt context.
vcount(vp) Calculate the total number of reference counts to a special device with vnode vp. vref(vp) Increment v_usecount of the vnode vp. Any kernel thread system which uses a vnode (e.g., during the operation of some algorithm or to store in a data structure) should call vref(). VREF(vp) This function is an alias for vref(). vrele(vp) Decrement v_usecount of unlocked vnode vp. Any code in the sys- tem which is using a vnode should call vrele() when it is fin- ished with the vnode. If v_usecount of the vnode reaches zero and v_holdcnt is greater than zero, the vnode is placed on the holdlist. If both v_usecount and v_holdcnt are zero, the vnode is placed on the freelist. vget(vp, lockflags) Reclaim vnode vp from the freelist, increment its reference count and lock it. The argument lockflags specifies the lockmgr(9) flags used to lock the vnode. If the VXLOCK is set in vp's v_flag, vnode vp is being recycled in vgone() and the calling thread sleeps until the transition is complete. When it is awakened, an error is returned to indicate that the vnode is no longer usable (possibly having been recycled to a new file system type). vput(vp) Unlock vnode vp and decrement its v_usecount. Depending on the reference counts, move the vnode to the holdlist or the freel- ist. This operation is functionally equivalent to calling VOP_UNLOCK(9) followed by vrele(). vhold(vp) Mark the vnode vp as active by incrementing vp->v_holdcnt and moving the vnode from the freelist to the holdlist. Once on the holdlist, the vnode will not be recycled until it is released with holdrele(). VHOLD(vp) This function is an alias for vhold(). holdrele(vp) Mark the vnode vp as inactive by decrementing vp->v_holdcnt and moving the vnode from the holdlist to the freelist. HOLDRELE(vp) This function is an alias for holdrele(). getnewvnode(tag, mp, vops, vpp) Retrieve the next vnode from the freelist. getnewvnode() must choose whether to allocate a new vnode or recycle an existing one. The criterion for allocating a new one is that the total number of vnodes is less than the number desired or there are no vnodes on either free list. Generally only vnodes that have no buffers associated with them are recycled and the next vnode from the freelist is retrieved. If the freelist is empty, vnodes on the holdlist are considered. The new vnode is returned in the address specified by vpp. The argument mp is the mount point for the file system requested the new vnode. Before retrieving the new vnode, the file system is checked if it is busy (such as currently unmounting). An error is returned if the file system is unmounted. The argument tag is the vnode tag assigned to *vpp->v_tag. The argument vops is the vnode operations vector of the file system requesting the new vnode. If a vnode is successfully retrieved zero is returned, otherwise an appropriate error code is returned. ungetnewvnode(vp) Undo the operation of getnewvnode(). The argument vp is the vnode to return to the freelist. This function is needed for VFS_VGET(9) which may need to push back a vnode in case of a locking race condition. vrecycle(vp, inter_lkp, l) Recycle the unused vnode vp to the front of the freelist. vrecycle() is a null operation if the reference count is greater than zero. vgone(vp) Eliminate all activity associated with the unlocked vnode vp in preparation for recycling. vgonel(vp, p) Eliminate all activity associated with the locked vnode vp in preparation for recycling. vflush(mp, skipvp, flags) Remove any vnodes in the vnode table belonging to mount point mp. If skipvp is not NULL it is exempt from being flushed. The argument flags is a set of flags modifying the operation of vflush(). If FORCECLOSE is not specified, there should not be any active vnodes and the error EBUSY is returned if any are found (this is a user error, not a system error). If FORCECLOSE is specified, active vnodes that are found are detached. If WRITECLOSE is set, only flush out regular file vnodes open for writing. SKIPSYSTEM causes any vnodes marked V_SYSTEM to be skipped. vaccess(type, file_mode, uid, gid, acc_mode, cred) Do access checking by comparing the file's permissions to the caller's desired access type acc_mode and credentials cred. checkalias(vp, nvp_rdev, mp) Check to see if the new vnode vp represents a special device for which another vnode represents the same device. If such an alias exists, the existing contents and the aliased vnode are deallocated. The caller is responsible for filling the new vnode with its new contents. bdevvp(dev, vpp) Create a vnode for a block device. bdevvp() is used for root file systems, swap areas and for memory file system special devices. cdevvp(dev, vpp) Create a vnode for a character device. cdevvp() is used for the console and kernfs special devices. vfinddev(dev, vtype, vpp) Lookup a vnode by device number. The vnode is returned in the address specified by vpp. vdevgone(int maj, int min, int minh, enum vtype type) Reclaim all vnodes that correspond to the specified minor number range minl to minh (endpoints inclusive) of the specified major maj. vwakeup(bp) Update outstanding I/O count vp->v_numoutput for the vnode bp->b_vp and do a wakeup if requested and vp->vflag has VBWAIT set. vflushbuf(vp, sync) Flush all dirty buffers to disk for the file with the locked vnode vp. The argument sync specifies whether the I/O should be synchronous and vflushbuf() will sleep until vp->v_numoutput is zero and vp->v_dirtyblkhd is empty. vinvalbuf(vp, flags, cred, l, slpflag, slptimeo) Flush out and invalidate all buffers associated with locked vnode vp. The argument l and cred specified the calling process and its credentials. The ltsleep(9) flag and timeout are speci- fied by the arguments slpflag and slptimeo respectively. If the operation is successful zero is returned, otherwise an appropri- ate error code is returned. vtruncbuf(vp, lbn, slpflag, slptimeo) Destroy any in-core buffers past the file truncation length for the locked vnode vp. The truncation length is specified by lbn. vtruncbuf() will sleep while the I/O is performed, The ltsleep(9) flag and timeout are specified by the arguments slpflag and slptimeo respectively. If the operation is success- ful zero is returned, otherwise an appropriate error code is returned. vprint(label, vp) This function is used by the kernel to dump vnode information during a panic. It is only used if the kernel option DIAGNOSTIC is compiled into the kernel. The argument label is a string to prefix the information dump of vnode vp.
This section describes places within the NetBSD source tree where actual code implementing or using the vnode framework can be found. All path- names are relative to /usr/src. The vnode framework is implemented within the files sys/kern/vfs_subr.c and sys/kern/vfs_subr2.c.
intro(9), lock(9), namecache(9), namei(9), uvm(9), vattr(9), vfs(9), vfsops(9), vnodeops(9), vnsubr(9)
The locking protocol is inconsistent. Many vnode operations are passed locked vnodes on entry but release the lock before they exit. The lock- ing protocol is used in some places to attempt to make a series of opera- tions atomic (e.g., access check then operation). This does not work for non-local file systems that do not support locking (e.g., NFS). The vnode interface would benefit from a simpler locking protocol. NetBSD 5.0 January 24, 2008 NetBSD 5.0
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.