dpt(4) - NetBSD Manual Pages

DPT(4)                  NetBSD Kernel Interfaces Manual                 DPT(4)


NAME
dpt - DPT EATA SCSI adapter driver
SYNOPSIS
dpt* at isa? port ? irq ? dma ? dpt* at eisa? slot ? dpt* at pci? dev ? function ? scsibus* at dpt?
DESCRIPTION
The dpt driver provides support for third and fourth generation DPT SCSI controllers. All communication with the controllers is conducted via the EATA (Enhanced AT Bus Attachment) protocol. DPT adapters examine and interpret all SCSI commands received before passing them to any underlying physical device(s). In this way, caching, RAID and other transformations are achieved while remaining transparent to the host operating system.
HARDWARE
The dpt driver provides support for the adapters listed below. Later models are supported by the iop driver. DPT SmartCache III DPT SmartCache IV DPT SmartRAID III DPT SmartRAID IV
FILES
/dev/dptu control device for unit u
DIAGNOSTICS
None of these messages should be encountered under normal circumstances. It should be noted that the list below is not complete. dpt%d: readcfg failed - see dpt(4) The EATA configuration data did not appear upon request. This may be caused by older firmware. Generally the solution is to power-cycle the affected machine. dpt%d: spurious intr A spurious interrupt was received from the HBA. dpt%d: bogus status (returned CCB id NNNN) A corrupt or incomplete status packet was received from the HBA.
SEE ALSO
cd(4), ch(4), dpti(4), intro(4), iop(4), scsi(4), sd(4), st(4) The sysutils/dptutil package. CAM committee standard CAM/89-004 - the EATA (Enhanced AT Bus Attachment) protocol.
HISTORY
The dpt driver first appeared in NetBSD 1.4.2.
AUTHORS
The dpt driver was written by Andrew Doran <ad@NetBSD.org>, based upon the uha and bha drivers, which are the work of others.
BUGS
EATA adapters other than listed may function correctly with the dpt driver, however a definitive list is not available. Older boards that do not support scatter-gather I/O or DMA are not sup- ported. ECC formatted disk and arrays (i.e. with a sector size of 528 bytes) do not work correctly with the PM2041 and certain firmware revisions of the PM3334. NetBSD 2.0 December 7, 2002 NetBSD 2.0

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.