dhclient-script(8)
- NetBSD Manual Pages
dhclient-script(8) dhclient-script(8)
NAME
dhclient-script - DHCP client network configuration script
DESCRIPTION
The DHCP client network configuration script is invoked
from time to time by dhclient(8). This script is used by
the dhcp client to set each interface's initial configura-
tion prior to requesting an address, to test the address
once it has been offered, and to set the interface's final
configuration once a lease has been acquired. If no lease
is acquired, the script is used to test predefined leases,
if any, and also called once if no valid lease can be
identified.
This script is not meant to be customized by the end user.
If local customizations are needed, they should be possi-
ble using the enter and exit hooks provided (see HOOKS for
details). These hooks will allow the user to override
the default behaviour of the client in creating a
/etc/resolv.conf file.
No standard client script exists for some operating sys-
tems, even though the actual client may work, so a pio-
neering user may well need to create a new script or mod-
ify an existing one. In general, customizations specific
to a particular computer should be done in the
/etc/dhclient.conf file. If you find that you can't make
such a customization without customizing
/etc/dhclient.conf or using the enter and exit hooks,
please submit a bug report.
HOOKS
When it starts, the client script first defines a shell
function, make_resolv_conf , which is later used to create
the /etc/resolv.conf file. To override the default
behaviour, redefine this function in the enter hook
script.
On after defining the make_resolv_conf function, the
client script checks for the presence of an executable
/etc/dhclient-enter-hooks script, and if present, it
invokes the script inline, using the Bourne shell '.' com-
mand. The entire environment documented under OPERATION
is available to this script, which may modify the environ-
ment if needed to change the behaviour of the script. If
an error occurs during the execution of the script, it can
set the exit_status variable to a nonzero value, and
/sbin/dhclient-script will exit with that error code imme-
diately after the client script exits.
After all processing has completed, /sbin/dhclient-script
checks for the presence of an executable /etc/dhclient-
exit-hooks script, which if present is invoked using the
'.' command. The exit status of dhclient-script will be
1
dhclient-script(8) dhclient-script(8)
passed to dhclient-exit-hooks in the exit_status shell
variable, and will always be zero if the script succeeded
at the task for which it was invoked. The rest of the
environment as described previously for dhclient-enter-
hooks is also present. The /etc/dhclient-exit-hooks
script can modify the valid of exit_status to change the
exit status of dhclient-script.
OPERATION
When dhclient needs to invoke the client configuration
script, it defines a set of variables in the environment,
and then invokes CLIENTBINDIR/dhclient-script. In all
cases, $reason is set to the name of the reason why the
script has been invoked. The following reasons are cur-
rently defined: MEDIUM, PREINIT, BOUND, RENEW, REBIND,
REBOOT, EXPIRE, FAIL and TIMEOUT.
MEDIUM
The DHCP client is requesting that an interface's media
type be set. The interface name is passed in $interface,
and the media type is passed in $medium.
PREINIT
The DHCP client is requesting that an interface be config-
ured as required in order to send packets prior to receiv-
ing an actual address. For clients which use the BSD
socket library, this means configuring the interface with
an IP address of 0.0.0.0 and a broadcast address of
255.255.255.255. For other clients, it may be possible
to simply configure the interface up without actually giv-
ing it an IP address at all. The interface name is
passed in $interface, and the media type in $medium.
If an IP alias has been declared in dhclient.conf, its
address will be passed in $alias_ip_address, and that ip
alias should be deleted from the interface, along with any
routes to it.
BOUND
The DHCP client has done an initial binding to a new
address. The new ip address is passed in
$new_ip_address, and the interface name is passed in
$interface. The media type is passed in $medium. Any
options acquired from the server are passed using the
option name described in dhcp-options, except that dashes
('-') are replaced by underscores ('_') in order to make
valid shell variables, and the variable names start with
new_. So for example, the new subnet mask would be
passed in $new_subnet_mask.
Before actually configuring the address, dhclient-script
should somehow ARP for it and exit with a nonzero status
if it receives a reply. In this case, the client will
2
dhclient-script(8) dhclient-script(8)
send a DHCPDECLINE message to the server and acquire a
different address. This may also be done in the RENEW,
REBIND, or REBOOT states, but is not required, and indeed
may not be desirable.
When a binding has been completed, a lot of network param-
eters are likely to need to be set up. A new
/etc/resolv.conf needs to be created, using the values of
$new_domain_name and $new_domain_name_servers (which may
list more than one server, separated by spaces). A
default route should be set using $new_routers, and static
routes may need to be set up using $new_static_routes.
If an IP alias has been declared, it must be set up here.
The alias IP address will be written as $alias_ip_address,
and other DHCP options that are set for the alias (e.g.,
subnet mask) will be passed in variables named as
described previously except starting with $alias_ instead
of $new_. Care should be taken that the alias IP address
not be used if it is identical to the bound IP address
($new_ip_address), since the other alias parameters may be
incorrect in this case.
RENEW
When a binding has been renewed, the script is called as
in BOUND, except that in addition to all the variables
starting with $new_, there is another set of variables
starting with $old_. Persistent settings that may have
changed need to be deleted - for example, if a local route
to the bound address is being configured, the old local
route should be deleted. If the default route has
changed, the old default route should be deleted. If the
static routes have changed, the old ones should be
deleted. Otherwise, processing can be done as with BOUND.
REBIND
The DHCP client has rebound to a new DHCP server. This
can be handled as with RENEW, except that if the IP
address has changed, the ARP table should be cleared.
REBOOT
The DHCP client has successfully reacquired its old
address after a reboot. This can be processed as with
BOUND.
EXPIRE
The DHCP client has failed to renew its lease or acquire a
new one, and the lease has expired. The IP address must
be relinquished, and all related parameters should be
deleted, as in RENEW and REBIND.
FAIL
The DHCP client has been unable to contact any DHCP
servers, and any leases that have been tested have not
3
dhclient-script(8) dhclient-script(8)
proved to be valid. The parameters from the last lease
tested should be deconfigured. This can be handled in
the same way as EXPIRE.
TIMEOUT
The DHCP client has been unable to contact any DHCP
servers. However, an old lease has been identified, and
its parameters have been passed in as with BOUND. The
client configuration script should test these parameters
and, if it has reason to believe they are valid, should
exit with a value of zero. If not, it should exit with a
nonzero value.
The usual way to test a lease is to set up the network as
with REBIND (since this may be called to test more than
one lease) and then ping the first router defined in
$routers. If a response is received, the lease must be
valid for the network to which the interface is currently
connected. It would be more complete to try to ping all
of the routers listed in $new_routers, as well as those
listed in $new_static_routes, but current scripts do not
do this.
FILES
Each operating system should generally have its own script
file, although the script files for similar operating sys-
tems may be similar or even identical. The script files
included in the Internet Software Consortium DHCP distri-
bution appear in the distribution tree under
client/scripts, and bear the names of the operating sys-
tems on which they are intended to work.
BUGS
If more than one interface is being used, there's no obvi-
ous way to avoid clashes between server-supplied configu-
ration parameters - for example, the stock dhclient-script
rewrites /etc/resolv.conf. If more than one interface is
being configured, /etc/resolv.conf will be repeatedly ini-
tialized to the values provided by one server, and then
the other. Assuming the information provided by both
servers is valid, this shouldn't cause any real problems,
but it could be confusing.
SEE ALSO
dhclient(8), dhcpd(8), dhcrelay(8), dhclient.conf(5) and
dhclient.leases(5).
AUTHOR
dhclient-script(8) has been written for the Internet Soft-
ware Consortium by Ted Lemon in cooperation with Vixie
Enterprises. To learn more about the Internet Software
Consortium, see http://www.isc.org. To learn more about
Vixie Enterprises, see http://www.vix.com.
4
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.