ipftest(1) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>



ipftest(1)                                             ipftest(1)



NAME

       ipftest - test packet filter rules with arbitary input.


SYNOPSIS

       ipftest [ -vbdPSTEHX ] [ -I interface ] -r <filename> [ -i
       <filename> ]


DESCRIPTION

       ipftest is provided for the purpose of being able to  test
       a set of filter rules without having to put them in place,
       in operation and proceed to test their effectiveness.  The
       hope  is  that  this  minimises disruptions in providing a
       secure IP environment.

       ipftest will parse any standard ruleset for use  with  ipf
       and  apply input, returning output as to the result.  How-
       ever, ipftest will return one of three values for  packets
       passed  through  the filter: pass, block or nomatch.  This
       is intended to give the operator a better idea of what  is
       happening  with packets passing through their filter rule-
       set.

       When used without either of -S, -T or -E, ipftest uses its
       own  text input format to generate "fake" IP packets.  The
       format used is as follows:
                 "in"|"out" "on" if ["tcp"|"udp"|"icmp"]
                      srchost[,srcport] dsthost[,destport] [FSRPAU]

       This allows for a packet going "in" or "out" of an  inter-
       face  (if)  to  be  generated, being one of the three main
       protocols (optionally), and if either TCP or UDP,  a  port
       parameter  is  also  expected.   If TCP is selected, it is
       possible to (optionally) supply  TCP  flags  at  the  end.
       Some examples are:
                 # a UDP packet coming in on le0
                 in on le0 udp 10.1.1.1,2210 10.2.1.5,23
                 # an IP packet coming in on le0 from localhost - hmm :)
                 in on le0 localhost 10.4.12.1
                 # a TCP packet going out of le0 with the SYN flag set.
                 out on le0 tcp 10.4.12.1,2245 10.1.1.1,23 S


OPTIONS

       -v     Verbose mode.  This provides more information about
              which parts  of  rule  matching  the  input  packet
              passes and fails.

       -d     Turn  on  filter  rule  debugging.  Currently, this
              only shows you what caused the rule to not match in
              the IP header checking (addresses/netmasks, etc).

       -b     Cause  the  output to be a brief summary (one-word)
              of the result of passing  the  packet  through  the
              filter;  either "pass", "block" or "nomatch".  This
              is used in the regression testing.



                                                                1





ipftest(1)                                             ipftest(1)


       -I <interface>
              Set the interface name (used in rule  matching)  to
              be  the name supplied.  This is useful with the -P,
              -S, -T and -E options, where it  is  not  otherwise
              possible  to  associate a packet with an interface.
              Normal "text packets" can override this setting.

       -P     The input file specified by -i  is  a  binary  file
              produced  using  libpcap (i.e., tcpdump version 3).
              Packets are read from this file as being input (for
              rule purposes).  An interface maybe specified using
              -I.

       -S     The input file is to be in "snoop" format (see  RFC
              1761).  Packets are read from this file and used as
              input from any interface.  This is perhaps the most
              useful input type, currently.

       -T     The  input  file is to be text output from tcpdump.
              The text formats which are currently supported  are
              those  which  result  from  the  following  tcpdump
              option combinations:

                 tcpdump -n
                 tcpdump -nq
                 tcpdump -nqt
                 tcpdump -nqtt
                 tcpdump -nqte


       -H     The input file is to be  hex  digits,  representing
              the binary makeup of the packet.  No length correc-
              tion is made, if an incorrect length is put in  the
              IP header.

       -X     The  input file is composed of text descriptions of
              IP packets.

       -E     The input file is to be text output from etherfind.
              The  text formats which are currently supported are
              those which result  from  the  following  etherfind
              option combinations:

                 etherfind -n
                 etherfind -n -t


       -i <filename>
              Specify  the  filename  from  which  to take input.
              Default is stdin.

       -r <filename>
              Specify the filename  from  which  to  read  filter
              rules.



                                                                2





ipftest(1)                                             ipftest(1)



SEE ALSO

       ipf(5), ipf(8), tcpdump(8),


BUGS

       Not  all  of the input formats are sufficiently capable of
       introducing a wide enough variety of packets for  them  to
       be all useful in testing.


















































                                                                3