btattach(8) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
BTATTACH(8)             NetBSD System Manager's Manual             BTATTACH(8)

btattach -- attach serial lines as Bluetooth HCI interfaces
btattach [-dFfoPp] [-i speed] [type] tty speed btattach -t [-dFfoPp] tty
btattach is used to assign a tty line to a Bluetooth Host Controller Interface using the btuart(4) or bcsp(4) line disciplines, and can optionally initialize the line for a given device type before activating the line discipline. Supported types are: bcm2035 Broadcom BCM2035 bcm43xx Broadcom BCM43xx bcm43xx-3wire Broadcom BCM43xx (3-wire) bcsp Generic BCSP (BlueCore Serial Protocol) bgb2xx Philips BGB2xx module btuart Generic UART (this is the default) csr Cambridge Silicon Radio Casira serial adapter, or Brainboxes serial dongle (BL642) ericsson Ericsson based modules digi Digianswer based cards st ST Microelectronics minikits based on STLC2410/STLC2415 stlc2500 ST Microelectronics minikits based on STLC2500 swave Silicon Wave kits texas Texas Instruments modules unistone Infineon UniStone (PBA31308) modules When the line discipline is activated, btattach detaches and sleeps until it receives a SIGHUP. The command line options are as follows: -d debug mode. print initialization IO and do not detach. -F Disable flow control. -f Enable flow control. -i speed Specify an alternate speed for the Bluetooth module to use dur- ing the initialization phase. -o Enable odd parity. -P Disable parity. -p Enable parity (even parity). -t Test mode. Only the super-user may attach a Bluetooth HCI interface. Test mode tries to guess the speed using the received link-establish packet from HCI, or btuart(4), if there is no response.
bcsp(4), bluetooth(4), btuart(4), btconfig(8)
The btattach program was written with reference to hciattach as provided with the BlueZ tools for Linux and first appeared in NetBSD 5.0.
KIYOHARA Takashi <> Iain Hibbert
Not all type initializations have been tested. NetBSD 10.99 August 11, 2017 NetBSD 10.99
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.