cidr_table(5) - NetBSD Manual Pages

CIDR_TABLE(5)                                                    CIDR_TABLE(5)




NAME
cidr_table - format of Postfix CIDR tables
SYNOPSIS
postmap -q "string" cidr:/etc/postfix/filename postmap -q - cidr:/etc/postfix/filename <inputfile
DESCRIPTION
The Postfix mail system uses optional lookup tables. These tables are usually in dbm or db format. Alternatively, lookup tables can be spec- ified in CIDR (Classless Inter-Domain Routing) form. In this case, each input is compared against a list of patterns. When a match is found, the corresponding result is returned and the search is terminated. To find out what types of lookup tables your Postfix system supports use the "postconf -m" command. To test lookup tables, use the "postmap -q" command as described in the SYNOPSIS above.
TABLE FORMAT
The general form of a Postfix CIDR table is: pattern result When a search string matches the specified pattern, use the cor- responding result value. The pattern must be in network/prefix or network_address form (see ADDRESS PATTERN SYNTAX below). !pattern result When a search string does not match the specified pattern, use the specified result value. The pattern must be in network/pre- fix or network_address form (see ADDRESS PATTERN SYNTAX below). This feature is available in Postfix 3.2 and later. if pattern endif When a search string matches the specified pattern, match that search string against the patterns between if and endif. The pattern must be in network/prefix or network_address form (see ADDRESS PATTERN SYNTAX below). The if..endif can nest. Note: do not prepend whitespace to text between if..endif. This feature is available in Postfix 3.2 and later. if !pattern endif When a search string does not match the specified pattern, match that search string against the patterns between if and endif. The pattern must be in network/prefix or network_address form (see ADDRESS PATTERN SYNTAX below). The if..endif can nest. Note: do not prepend whitespace to text between if..endif. This feature is available in Postfix 3.2 and later. blank lines and comments Empty lines and whitespace-only lines are ignored, as are lines whose first non-whitespace character is a `#'. multi-line text A logical line starts with non-whitespace text. A line that starts with whitespace continues a logical line.
TABLE SEARCH ORDER
Patterns are applied in the order as specified in the table, until a pattern is found that matches the search string.
ADDRESS PATTERN SYNTAX
Postfix CIDR tables are pattern-based. A pattern is either a net- work_address which requires an exact match, or a network_address/pre- fix_length where the prefix_length part specifies the length of the network_address prefix that must be matched (the other bits in the net- work_address part must be zero). An IPv4 network address is a sequence of four decimal octets separated by ".", and an IPv6 network address is a sequence of three to eight hexadecimal octet pairs separated by ":" or "::", where the latter is short-hand for a sequence of one or more all-zero octet pairs. The pat- tern 0.0.0.0/0 matches every IPv4 address, and ::/0 matches every IPv6 address. IPv6 support is available in Postfix 2.2 and later. Before comparisons are made, lookup keys and table entries are con- verted from string to binary. Therefore, IPv6 patterns will be matched regardless of leading zeros (a leading zero in an IPv4 address octet indicates octal notation). Note: address information may be enclosed inside "[]" but this form is not required.
INLINE SPECIFICATION
The contents of a table may be specified in the table name (Postfix 3.7 and later). The basic syntax is: main.cf: parameter = .. cidr:{ { rule-1 }, { rule-2 } .. } .. master.cf: .. -o { parameter = .. cidr:{ { rule-1 }, { rule-2 } .. } .. } .. Postfix ignores whitespace after '{' and before '}', and writes each rule as one text line to an in-memory file: in-memory file: rule-1 rule-2 .. Postfix parses the result as if it is a file in /etc/postfix. Note: if a rule contains $, specify $$ to keep Postfix from trying to do $name expansion as it evaluates a parameter value.
EXAMPLE SMTPD ACCESS MAP
/etc/postfix/main.cf: smtpd_client_restrictions = ... cidr:/etc/postfix/client.cidr ... /etc/postfix/client.cidr: # Rule order matters. Put more specific allowlist entries # before more general denylist entries. 192.168.1.1 OK 192.168.0.0/16 REJECT 2001:db8::1 OK 2001:db8::/32 REJECT
SEE ALSO
postmap(1), Postfix lookup table manager regexp_table(5), format of regular expression tables pcre_table(5), format of PCRE tables
README FILES
Use "postconf readme_directory" or "postconf html_directory" to locate this information. DATABASE_README, Postfix lookup table overview
HISTORY
CIDR table support was introduced with Postfix version 2.1.
AUTHOR(S)
The CIDR table lookup code was originally written by: Jozsef Kadlecsik KFKI Research Institute for Particle and Nuclear Physics POB. 49 1525 Budapest, Hungary Adopted and adapted by: Wietse Venema IBM T.J. Watson Research P.O. Box 704 Yorktown Heights, NY 10598, USA Wietse Venema Google, Inc. 111 8th Avenue New York, NY 10011, USA CIDR_TABLE(5)

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.