vmware(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
VMWARE(4)                                                            VMWARE(4)




NAME

       vmware - VMware SVGA video driver


SYNOPSIS

       Section "Device"
         Identifier "devname"
         Driver "vmware"
         ...
       EndSection


DESCRIPTION

       vmware is an Xorg driver for VMware virtual video cards.

MODESETTING, XINERAMA AND RANDR12
       If  the  driver  can connect to the "vmwgfx" kernel module on linux, it
       will attempt to use kernel modesetting and will then also  use  RandR12
       for  multiple output operation instead of Xinerama. The X server log or
       the "xrandr" application can be used to determine  whether  RandR12  or
       Xinerama is actually used.

3D ACCELERATION
       If  the  driver can connect to the "vmwgfx" kernel module on linux, and
       the Virtual Machine is set up to use 3D acceleration, the  driver  will
       try  to  use  Gallium3D XA to accelerate 3D operations. It will also by
       default enable DRI, the Direct Rendering Infrastructure, primarily  for
       accelerated  OpenGL.   If 3D acceleration is available, the driver will
       in addition provide an additional XVideo adaptor  for  textured  video.
       Gallium3D   XA,ibxatracker.so"   and  the  accelerated  OpenGL  driver,
       "vmwgfx_dri.so" is provided by the mesa distribution.


CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration  details.   This
       section only covers configuration details specific to this driver.

       The driver auto-detects the version of any virtual VMware SVGA adapter.

       The following driver Options are supported:

       Option "HWCursor" "boolean"
              Enable or disable the HW cursor.  Default: off.

       Option "Xinerama" "boolean"
              Disable or enable Xinerama support. Default: xinerama is enabled
              if the hardware supports it.

       Option "StaticXinerama" "string"
              Provide a static xinerama geometry that will be active at server
              startup and will not be overridden at runtime.   The  format  is
              "Width1xHeight1+Xoffset1+Yoffset1;Width2xHeight2+Xoffset2+Yoff-
              set2" and so on. Negative offsets  are  not  supported.  If  the
              driver is using RandR12, this option should be used to place and
              enable outputs at driver startup time or else when VMware  tools
              is  not  used for that purpose.  Also please see option "GuiLay-
              out".

       Option "GuiLayout" "string"
              A synonym to option "StaticXinerama", since the latter  name  is
              somewhat misleading when RandR12 is favoured before Xinerarma.

       Option "AddDefaultMode" "boolean"
              Provide  a default mode with a resolution identical to the reso-
              lution of the guest before the  X  server  was  started.  The  X
              server  will  thus  try  to  start  without changing resolution.
              Default: on.

       Option "RenderAccel" "boolean"
              Try to accelerate render operations if the operations are  read-
              ing  from  previously  accelerated  contents (3D or video). This
              option is needed for 3D support. Default: on if 3D  acceleration
              is supported. Otherwise off.

       Option "DRI" "boolean"
              Enable  the  Direct  Rendering Infrastructure. Default: on if 3D
              acceleration is supported and "RenderAccel" is  enabled.  Other-
              wise off.

       Option "DirectPresents" "boolean"
              Speed  up  OpenGL swapbuffers by skipping a copy operation. This
              provides some OpenGL swapbuffer speedups, but may cause  perfor-
              mance  degradation and rendering errors when 3D contents is read
              back for mixing with software rendered contents. Default: off.

       Option "HwPresents" "boolean"
              This is a developer convenience option and should not be used by
              distros  or  normal users. When enabled, it copies software ren-
              dered contents to a 3D surface before presenting it, so that the
              visible  screen is always present on a 3D surface. Default: off.

       Option "RenderCheck" "boolean"
              This is a developer convenience option and should not be used by
              distros or normal users. When enabled, it tries to use 3D accel-
              eration for all XRender operations where 3D acceleration is sup-
              ported,   resulting  in  a  considerable  slowdown  due  to  the
              increased number of readbacks of accelerated contents from  host
              to  guest.  This  option  is used to verify that the accelerated
              Xrender paths works correctly with  the  "rendercheck"  applica-
              tion. Default: off.


       SEE ALSO
              Xorg(1), xorg.conf(5), Xserver(1), X(7), xrandr(1)


AUTHORS

       Copyright (c) 1999-2007 VMware, Inc.



                                 X Version 11                        VMWARE(4)