- NetBSD Manual Pages
WSMUX(4) NetBSD Kernel Interfaces Manual WSMUX(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
wsmux -- console keyboard/mouse multiplexor for wscons
wskbd* at ... mux 1
wsbell* at ... mux 1
wsmouse* at ... mux 0
The wsmux is a pseudo-device driver that allows several wscons(4) input
devices to have their events multiplexed into one stream.
The typical usage for this device is to have two multiplexors, one for
mouse events and one for keyboard and bell events. All wsmouse(4)
devices should direct their events to the mouse mux (normally 0) and all
keyboard devices, except the console, should direct their events to the
keyboard mux (normally 1). A device will send its events to the mux
indicated by the mux locator. If none is given the device will not use a
multiplexor. The keyboard multiplexor should be connected to the dis-
play, using the wsconscfg(8) command. It will then receive all key-
strokes from all keyboards and, furthermore, keyboards can be dynamically
attached and detached without further user interaction. Additionally,
bell events generated for the display will be directed to all attached
wsbell(4) devices. In a similar way, the window system will open the
mouse multiplexor and receive all mouse events; mice can also be dynami-
cally attached and detached.
If a wskbd(4), wsbell(4), or wsmouse(4) device is opened despite having a
mux it will be detached from the mux.
It is also possible to inject events into a multiplexor from a user pro-
For each mux device, /dev/wsmuxN there is a control device
/dev/wsmuxctlN. The control device has a minor number 128 greater than
the regular mux device. It can be used to control the mux even when it
is open, e.g., by wsmuxctl(8).
/dev/wsmouse a.k.a. /dev/wsmux0
/dev/wskbd a.k.a. /dev/wsmux1
wsbell(4), wscons(4), wsdisplay(4), wskbd(4), wsmouse(4), moused(8),
wsconscfg(8), wsconsctl(8), wsfontload(8), wsmoused(8), wsmuxctl(8)
NetBSD 9.3 June 13, 2017 NetBSD 9.3