PSREF(9) NetBSD Kernel Developer's Manual PSREF(9)
NAME
psref -- passive references
SYNOPSIS
#include <sys/psref.h> struct psref_class * psref_class_create(const char *name, int ipl); void psref_class_destroy(struct psref_class *class); void psref_target_init(struct psref_target *target, struct psref_class *class); void psref_target_destroy(struct psref_target *target, struct psref_class *class); void psref_acquire(struct psref *ref, const struct psref_target *target, struct psref_class *class); void psref_release(struct psref *ref, const struct psref_target *target, struct psref_class *class); void psref_copy(struct psref *pto, const struct psref *pfrom, struct psref_class *class); #ifdef DIAGNOSTIC bool psref_held(const struct psref_target *target, struct psref_class *class); #endif
DESCRIPTION
The psref abstraction allows CPUs to cheaply acquire and release passive references to a resource, which guarantee the resource will not be destroyed until the reference is released. Acquiring and releasing pas- sive references requires no interprocessor synchronization, except when the resource is pending destruction. Passive references are an intermediate between pserialize(9) and refer- ence counting: - pserialize(9) read sections require no interprocessor synchroniza- tion, but must be of short duration, and may not sleep. A pserialize(9) read section blocks soft interrupts on the local CPU until it is complete. - Reference counting requires interprocessor synchronization via atomic_ops(3) or mutex(9). However, with reference counting, a ref- erence may be held for arbitrary durations, may be transferred between owners across CPUs and threads, and may be held by a caller that sleeps. Passive references share some properties of both: passive references avoid interprocessor synchronization, and do not block soft interrupts, but can be held by a caller that sleeps. However, a caller holding a passive reference may not transfer it from one LWP to another, and the caller's LWP must be bound to a single CPU while it holds any passive references. Thus, passive references are useful for incrementally parallelizing resources whose operations may sleep, such as in the network stack, before comprehensively removing sleeps from the code paths involved. Resources to which callers may hold passive references are called targets, and must contain an embedded struct psref_target object, ini- tialized with psref_target_init(). When a caller wants to guarantee that a resource will not be destroyed until it is done, it must allocate storage for a struct psref object, find the struct psref_target for the resource it seeks, and use psref_acquire() to acquire a passive reference. When a caller is done with the resource, it must release the resource with psref_release(). When a resource is about to go away, its passive reference target must be passed to psref_target_destroy() to wait until all extant passive refer- ences are released; then the resource itself may be freed. struct psref_target and struct psref objects must be allocated by the caller, but they should be treated as opaque and should not be inspected or copied. Passive reference targets are grouped into classes, represented by an opaque struct psref_class object, e.g. the class of all network routes, or the class of all file systems mount points, which may be needed at different interrupt priority levels.
FUNCTIONS
psref_class_create(name, ipl) Create a passive reference class with the given name and interrupt priority level, and return an opaque pointer describing it. The name must be at most eight characters long, and will be shown in utilities such as ps(1) for threads that are waiting to destroy passive reference targets. On failure, return NULL instead. psref_class_destroy(class) Destroy a passive reference class created with psref_class_create(). There must be no more passive references in this class. psref_target_init(target, class) Initialize a passive reference target in a struct psref_target object allocated by the caller in the given class. The caller must issue a membar_producer(3) after calling psref_target_init() and before publishing a pointer to the target so that other CPUs can see it, e.g. by inserting it into a pslist(9). psref_target_destroy(target, class) Wait for all extant passive references to target on all CPUs to be released, and then destroy it. The passive reference target target must have been initialized with psref_target_init() in the same class. May sleep. The caller must guarantee that no new references to target will be acquired once it calls psref_target_destroy(), e.g. by removing the target from a pslist(9) and calling pserialize_perform(9) to wait for pserialize(9) readers to complete. No further use of the target is allowed unless it is reinitialized with psref_target_init(). Multiple concurrent calls to psref_target_destroy() are not allowed. psref_acquire(ref, target, class) Acquire a passive reference to target, storing per-CPU bookkeeping in ref. The class of target must be class. The caller must ensure by some other mechanism than passive refer- ences that the target will not be destroyed before the call to psref_acquire(); typically this will be via a pserialize(9) read section. The caller's LWP must be bound to a CPU. psref_release(ref, target, class) Release the passive reference ref, which must have been acquired to point at target in the class class, waking a thread calling psref_target_destroy() if any. Further use of the resource represented by target is not allowed, unless it is re-acquired in the same way that it was originally acquired. psref_copy(pto, pfrom, class) Copy the passive reference pfrom to pto, which must be to a target in class. The resource represented by the target of the passive references will not be destroyed before both references are released. psref_held(target, class) Return true if the current CPU holds a passive reference to target in the passive reference class class, or false if not. This does not answer about other CPUs -- it does not tell you whether any CPU holds a passive reference to target. This may be used only in assertions, e.g. with KASSERT(9), not for making run-time decisions. This should be used only for positive assertions, as in KASSERT(psref_held(target, class)), not for nega- tive assertions, as in KASSERT(!psref_held(target, class)), unless you are sure you can prove that no caller holds a reference either.
EXAMPLES
struct frotz { int f_key; ... struct pslist_entry f_entry; struct psref_target f_target; }; static struct { kmutex_t lock; struct pslist_head list; } frobbotzim __cacheline_aligned; static pserialize_t frobbotzim_psz __read_mostly; static struct psref_class *frobbotzim_prc __read_mostly; void publish_as_frotz(uint64_t key, ...) { struct frotz *f; f = kmem_alloc(sizeof(*f), KM_SLEEP); f->f_key = key; f->f_... = ...; PSLIST_ENTRY_INIT(f, f_entry); psref_target_init(&f->f_target, frobbotzim_prc); mutex_enter(&frobbotzim.lock); PSLIST_WRITER_INSERT_HEAD(&frobbotzim.list, f, f_entry); mutex_exit(&frobbotzim.lock); } int use_frotz(int key, int op) { struct frotz *f; struct psref ref; /* Acquire a passive reference. */ if ((f = lookup_frotz(key, &ref)) == NULL) return ENOENT; /* Do something that may sleep. */ do_stuff_with_frotz(f, op); /* Release passive reference, possibly waking destroy_frotz. */ psref_release(&ref, &f->f_psref, frobbotzim_prc); return 0; } struct frotz * lookup_frotz(int key, struct psref *ref) { struct frotz *f; int s; /* Look up a frotz in a pserialized list. */ s = pserialize_read_enter(); PSLIST_READER_FOREACH(f, &frobbotzim.list, struct frotz, f_next) { /* f is stable until pserialize_read_exit. */ if (f->f_key == key) { /* Acquire a passive reference. */ psref_acquire(ref, &f->f_target, frobbotzim_prc); /* f is now stable until psref_release. */ break; } } pserialize_read_exit(s); return f; } void destroy_frotz(int key) { struct frotz *f; /* Look up and delete a frotz. */ mutex_enter(&frobbotzim.lock); PSLIST_WRITER_FOREACH(f, &frobbotzim.list, struct frotz, f_entry) { if (f->f_key == key) { /* * Unlink the frotz from the list to stop new * pserialize read sections from seeing it. */ PSLIST_WRITER_REMOVE(f, f_entry); /* * Wait until extant pserialize read sections * have completed. */ pserialize_perform(frobbotzim_psz); break; } } mutex_exit(&frobbotzim.lock); if (f != NULL) { /* Wait for all readers to drain before freeing. */ psref_target_destroy(&f->f_target, frobbotzim_prc); PSLIST_ENTRY_DESTROY(f, f_entry); kmem_free(f, sizeof(*f)); } }
CODE REFERENCES
The psref abstraction is implemented in sys/kern/subr_psref.c.
SEE ALSO
pserialize(9), pslist(9)
HISTORY
The psref data structure first appeared in NetBSD 8.0.
AUTHORS
Taylor R Campbell <riastradh@NetBSD.org> NetBSD 9.3 April 27, 2016 NetBSD 9.3
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.