- NetBSD Manual Pages
DISKPART(8) NetBSD System Manager's Manual DISKPART(8)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
diskpart -- calculate default disk partition sizes
diskpart [-d] [-p] [-s size] disk-type
diskpart is used to calculate the disk partition sizes based on the
default rules used at Berkeley.
Available options and operands:
-d An entry suitable for inclusion in the disk description file
/etc/disktab is generated; for example, disktab(5).
-p Tables suitable for inclusion in a device driver are pro-
-s size The size of the disk may be limited to size with the -s
On disks that use bad144(8) type of bad-sector forwarding, space is nor-
mally left in the last partition on the disk for a bad sector forwarding
table, although this space is not reflected in the tables produced. The
space reserved is one track for the replicated copies of the table and
sufficient tracks to hold a pool of 126 sectors to which bad sectors are
mapped. For more information, see bad144(8). The -s option is intended
for other controllers which reserve some space at the end of the disk for
bad-sector replacements or other control areas, even if not a multiple of
The disk partition sizes are based on the total amount of space on the
disk as given in the table below (all values are supplied in units of
sectors). The `c' partition is, by convention, used to access the entire
physical disk. The device driver tables include the space reserved for
the bad sector forwarding table in the `c' partition; those used in the
disktab and default formats exclude reserved tracks. In normal opera-
tion, either the `g' partition is used, or the `d', `e', and `f' parti-
tions are used. The `g' and `f' partitions are variable-sized, occupying
whatever space remains after allocation of the fixed sized partitions.
If the disk is smaller than 20 Megabytes, then diskpart aborts with the
message ``disk too small, calculate by hand''.
Partition 20-60 MB 61-205 MB 206-355 MB 356+ MB
a 15884 15884 15884 15884
b 10032 33440 33440 66880
d 15884 15884 15884 15884
e unused 55936 55936 307200
h unused unused 291346 291346
If an unknown disk type is specified, diskpart will prompt for the
required disk geometry information.
The diskpart command appeared in 4.2BSD.
Most default partition sizes are based on historical artifacts (like the
RP06), and may result in unsatisfactory layouts.
When using the -d flag, alternative disk names are not included in the
NetBSD 9.3 June 6, 1993 NetBSD 9.3