- NetBSD Manual Pages
ACPITZ(4) NetBSD Kernel Interfaces Manual ACPITZ(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
acpitz -- ACPI Thermal Zone
acpitz* at acpi?
The acpitz driver supports so-called ACPI ``Thermal Zones''. The temper-
ature can be monitored by the envsys(4) API or the envstat(8) command.
The distinction between ``active'' and ``passive'' cooling is central to
the abstractions behind acpitz. These are inversely related to each
1. Active cooling means that the system increases the power consump-
tion of the machine by performing active thermal management (for
example, by turning on a fan) in order to reduce the temperatures.
2. Passive cooling means that the system reduces the power consump-
tion of devices at the cost of system performance (for example, by
lowering the CPU frequencies) in order to reduce the temperatures.
Only active cooling is currently supported on NetBSD.
It should be also noted that the internal functioning of these cooling
policies vary across machines. On some machines the operating system may
have little control over the thermal zones as the firmware manages the
thermal control internally, whereas on other machines the policies may be
exposed to the implementation at their full extent.
The acpitz driver knows about the active cooling levels, the current tem-
peratures, and critical, hot, and passive temperature thresholds (as sup-
ported by the hardware). The driver is able to send events to powerd(8)
when the sensor's state has changed. When a Thermal Zone is either crit-
ical or ``hot'', the /etc/powerd/scripts/sensor_temperature script will
be invoked with a critical-over event.
The critical temperature is the threshold for system shutdown. Depending
on the hardware, the mainboard will take down the system instantly and no
event will have a chance to be sent.
acpi(4), acpifan(4), envsys(4), envstat(8), powerd(8)
The acpitz driver appeared in NetBSD 2.0.
Jared D. McNeill <email@example.com>
While no pronounced bugs are known to exist, several caveats can be men-
· Passive cooling is not implemented.
· There is no user-controllable way to switch between active and pas-
sive cooling, although the specifications support such transforms on
· The ``hot'' temperature is a threshold in which the system ought to
be put into S4 sleep. This sleep state (``suspend to disk'') is not
supported on NetBSD.
NetBSD 9.3 January 9, 2011 NetBSD 9.3