- NetBSD Manual Pages
BTHSET(1) NetBSD General Commands Manual BTHSET(1)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
bthset -- Bluetooth Headset utility
bthset [-v] [-c command] [-m mixer] [-p file] [-s channel]
The bthset utility is used to access a Bluetooth Headset with the
btsco(4) audio device. It opens the mixer(4) device and creates the con-
trol connection to the headset, then conducts volume settings each way.
When bthset receives a SIGUSR1 signal, it will start sending RING codes
to the headset until the headset button is pressed or a SIGUSR2 signal is
received. If the headset is ringing and bthset receives a button press
notification, the specified command (if any) is executed.
When the server channel is specified with the -s option, instead of open-
ing the control connection, bthset will listen on the channel for incom-
ing connections from the Headset and register as Headset Audio Gateway
with the local SDP server.
The options are as follows:
Specify an optional command to be executed when the headset
responds to ringing with a button press event. This defaults to
the contents of the BTHSET_COMMAND environment variable, if set.
-h Print usage message.
Specify the path to the mixer device. This defaults to the con-
tents of the BTHSET_MIXER environment variable, or /dev/mixer if
Write the PID to file so that other programs can find us later.
This defaults to the contents of the BTHSET_PIDFILE environment
variable, if set.
Register with the local SDP server as a Headset Audio Gateway and
listen for connections on the given RFCOMM server channel.
-v Be verbose.
The bthset utility exits 0 on success, and >0 if an error occurs.
Iain Hibbert for Itronix, Inc
NetBSD 9.2 July 26, 2006 NetBSD 9.2