readdir(3) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
DIRECTORY(3)            NetBSD Library Functions Manual           DIRECTORY(3)


NAME
fdopendir, opendir, readdir, readdir_r, telldir, seekdir, rewinddir, closedir, dirfd -- directory operations
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <dirent.h> DIR * opendir(const char *filename); DIR * fdopendir(int fd); struct dirent * readdir(DIR *dirp); int readdir_r(DIR * restrict dirp, struct dirent * restrict entry, struct dirent ** restrict result); long telldir(DIR *dirp); void seekdir(DIR *dirp, long loc); void rewinddir(DIR *dirp); int closedir(DIR *dirp); int dirfd(DIR *dirp);
DESCRIPTION
The type DIR represents a directory stream; an ordered sequence of all directory entries in a particular directory. The purpose of the DIR structure is similar to that of the FILE structure maintained by the stdio(3) library functions.
FUNCTIONS
The following standard directory operations are defined. opendir(filename) The opendir() function opens the directory named by filename and as- sociates a directory stream with it. The directory stream is posi- tioned at the first entry. Upon successful completion, a pointer to DIR type is returned. Otherwise, opendir() returns NULL. fdopendir(fd) The fdopendir() function associates a directory stream with the directory file descriptor fd. The file offset associated with fd at the time of the call determines which entries are returned. Upon failure, fdopendir() returns NULL. Otherwise the file descrip- tor is under the control of the system, and if any attempt is made to close the file descriptor, or to modify the state of the associ- ated description, other than by means of closedir(), readdir(), readdir_r(), rewinddir(), the behavior is undefined. The file descriptor can be closed by calling closedir(). readdir(dirp) The readdir() function returns a pointer to the directory entry at the current position in the directory stream specified by dirp, and positions the directory stream at the next entry. It returns NULL upon reaching the end of the directory or detecting an invalid seekdir() operation. The returned structure is described in dirent(3). The returned pointer to the dirent structure points to data which may be overwritten by another call to readdir() on the same direc- tory stream. This data is not however overwritten by another call to readdir() on a different directory stream. readdir_r(dirp, entry, result) The readdir_r() function provides the same functionality as readdir(), but the caller must provide a directory entry buffer to store the results in. If the read succeeds, result is pointed at the entry; upon reaching the end of the directory result is set to NULL. The readdir_r() function returns 0 on success or an error number to indicate failure. Like readdir(), the readdir_r() function may buffer several direc- tory entries per actual read operation. Both functions mark for update the st_atime field (see stat(2)) of the directory each time the directory is actually read. telldir(dirp) The telldir() function returns the current location associated with the directory stream specified by dirp. If the most recent operation on the particular directory stream was a seekdir(), the directory position returned from telldir() is the same as loc supplied as an argument to the seekdir() call. seekdir(dirp, loc) The seekdir() function sets the position of the next readdir() oper- ation on the directory stream specified by dirp. The value of loc should come from a previous call to telldir() using the same direc- tory stream. The new position reverts to the one associated with the directory stream when the telldir() operation was performed. Values returned by telldir() are good only for the lifetime of the DIR pointer, dirp, from which they are derived. If the directory is closed and then reopened, the telldir() value cannot be re-used. rewinddir(dirp) The rewinddir() function resets the position of the named directory stream to the beginning of the directory. It also causes the direc- tory stream to refer to the current state of the corresponding directory, as if a call to opendir() would have been made. If dirp does not refer to a valid directory stream, the behavior is undefined. closedir(dirp) The closedir() function closes the directory stream and frees the structure associated with the dirp pointer, returning 0 on success and -1 on failure. dirfd(dirp) The dirfd() function returns the integer file descriptor associated with the directory stream specified by dirp. Upon failure, dirfd() returns -1. The returned file descriptor should not be closed by close(2), it will be released when dirp is closed with closedir(). The rationale of dirfd() is to provide a mechanism by which a file descriptor can be obtained for the use of the fchdir(2) function.
EXAMPLES
Sample code which searches a directory for entry ``name'' is: len = strlen(name); dirp = opendir("."); if (dirp != NULL) { while ((dp = readdir(dirp)) != NULL) if (dp->d_namlen == len && !strcmp(dp->d_name, name)) { (void)closedir(dirp); return (FOUND); } (void)closedir(dirp); } return (NOT_FOUND);
COMPATIBILITY
The described directory operations have traditionally been problematic in terms of portability. A good example is the semantics around `.' (dot) and `..' (dot-dot). Based on historical implementations, the rules about file descriptors apply to directory streams as well. The IEEE Std 1003.1-2008 (``POSIX.1'') standard no longer mandates that directory streams be implemented by using file descriptors. The following additional remarks can be noted from the IEEE Std 1003.1-2008 (``POSIX.1'') standard. · If the type DIR is implemented using a file descriptor, like in NetBSD, applications should be able to open only OPEN_MAX files and directories. Otherwise the limit is left as unspecified. · When a file descriptor is used to implement the directory stream, the closedir() function behaves as if the FD_CLOEXEC had been set for the file descriptor. In another words, it is mandatory that closedir() deallocates the file descriptor. · If directory streams are not implemented by using file descriptors, functions such as dirfd() may fail with ENOTSUP. · If a file is removed from or added to the directory after the most recent call to opendir() or rewinddir(), it is unspecified whether a subsequent call to readdir() returns an entry for that file. · When using the function seekdir(), note that if the value of loc was not obtained from an earlier call to telldir(), or if a call to rewinddir() occurred between the calls to telldir() and seekdir(), any subsequent call to readdir() is unspecified, possibly resulting in undefined behavior. · After a call to fork(2), either the parent or child (but not both) can continue processing the directory stream using readdir(), rewinddir(), or seekdir(). However, if both the parent and child processes use these functions, the result is undefined.
ERRORS
All described functions may set errno to indicate the error.
SEE ALSO
close(2), lseek(2), open(2), read(2), dirent(3)
STANDARDS
The opendir(), readdir(), rewinddir() and closedir() functions conform to ISO/IEC 9945-1:1990 (``POSIX.1''). The other functions conform to IEEE Std 1003.1-2008 (``POSIX.1'').
HISTORY
The opendir(), readdir(), telldir(), seekdir(), rewinddir(), closedir(), and dirfd() functions appeared in 4.2BSD. The fdopendir() function appeared in NetBSD 6.0. NetBSD 9.1 January 22, 2016 NetBSD 9.1
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.