inet_aton(3) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
INET(3)                 NetBSD Library Functions Manual                INET(3)


NAME
inet_addr, inet_aton, inet_lnaof, inet_makeaddr, inet_netof, inet_network, inet_ntoa, inet_ntop, inet_pton, addr, ntoa, network -- Internet address manipulation routines
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <arpa/inet.h> in_addr_t inet_addr(const char *cp); int inet_aton(const char *cp, struct in_addr *addr); in_addr_t inet_lnaof(struct in_addr in); struct in_addr inet_makeaddr(in_addr_t net, in_addr_t lna); in_addr_t inet_netof(struct in_addr in); in_addr_t inet_network(const char *cp); char * inet_ntoa(struct in_addr in); const char * inet_ntop(int af, const void * restrict src, char * restrict dst, socklen_t size); int inet_pton(int af, const char * restrict src, void * restrict dst);
DESCRIPTION
The routines inet_aton(), inet_addr() and inet_network() interpret char- acter strings representing numbers expressed in the Internet standard "dotted quad" notation. The inet_pton() function converts a presentation format address (that is, printable form as held in a character string) to network format (usually a struct in_addr or some other internal binary representation, in network byte order). It returns 1 if the address was valid for the specified address family, or 0 if the address wasn't parsable in the specified address family, or -1 if some system error occurred (in which case errno will have been set). This function is presently valid for AF_INET and AF_INET6. The inet_aton() routine interprets the specified character string as an Internet address, placing the address into the structure provided. It returns 1 if the string was successfully interpreted, or 0 if the string is invalid. The inet_addr() and inet_network() functions return numbers suitable for use as Internet addresses and Internet network numbers, respectively. The function inet_ntop() converts an address from network format (usually a struct in_addr or some other binary form, in network byte order) to presentation format (suitable for external display purposes). It returns NULL if a system error occurs (in which case, errno will have been set), or it returns a pointer to the destination string. The size parameter is the size of the buf argument. The routine inet_ntoa() takes an Internet address and returns an ASCII string representing the address in "dotted quad" notation. The routine inet_makeaddr() takes an Internet network number and a local network address (both in host order) and constructs an Internet address from it. Note that to convert only a single value to a struct in_addr form that value should be passed as the first parameter and `0L' should be given for the second parameter. The routines inet_netof() and inet_lnaof() break apart Internet host addresses, returning the network number and local network address part, respectively (both in host order). All Internet addresses are returned in network order (bytes ordered from left to right). All network numbers and local address parts are returned as machine format integer values. INTERNET ADDRESSES (IP VERSION 4) Values specified using the "dotted quad" notation take one of the follow- ing forms: a.b.c.d a.b.c a.b a When four parts are specified, each is interpreted as a byte of data and assigned, from left to right, to the four bytes of an Internet address. Note that when an Internet address is viewed as a 32-bit integer quantity on a system that uses little-endian byte order (e.g. Intel i386, i486 and Pentium processors) the bytes referred to above appear as ``d.c.b.a''. That is, little-endian bytes are ordered from right to left. When a three part address is specified, the last part is interpreted as a 16-bit quantity and placed in the right-most two bytes of the network address. This makes the three part address format convenient for speci- fying Class B network addresses as ``128.net.host''. When a two part address is supplied, the last part is interpreted as a 24-bit quantity and placed in the right most three bytes of the network address. This makes the two part address format convenient for specify- ing Class A network addresses as ``net.host''. When only one part is given, the value is stored directly in the network address without any byte rearrangement. All numbers supplied as ``parts'' in a "dotted quad" notation may be dec- imal, octal, or hexadecimal, as specified in the C language (i.e., a leading 0x or 0X implies hexadecimal; otherwise, a leading 0 implies octal; otherwise, the number is interpreted as decimal). INTERNET ADDRESSES (IP VERSION 6) In order to support scoped IPv6 addresses, the use of getaddrinfo(3) and getnameinfo(3) is recommended rather than the functions presented here. The presentation format of an IPv6 address is given in RFC 2373: There are three conventional forms for representing IPv6 addresses as text strings: 1. The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the hexa- decimal values of the eight 16-bit pieces of the address. Examples: FEDC:BA98:7654:3210:FEDC:BA98:7654:3210 1080:0:0:0:8:800:200C:417A Note that it is not necessary to write the leading zeros in an indi- vidual field, but there must be at least one numeral in every field (except for the case described in 2). 2. Due to the method of allocating certain styles of IPv6 addresses, it will be common for addresses to contain long strings of zero bits. In order to make writing addresses containing zero bits easier, a special syntax is available to compress the zeros. The use of ``::'' indicates multiple groups of 16-bits of zeros. The ``::'' can only appear once in an address. The ``::'' can also be used to compress the leading and/or trailing zeros in an address. For example the following addresses: 1080:0:0:0:8:800:200C:417A a unicast address FF01:0:0:0:0:0:0:43 a multicast address 0:0:0:0:0:0:0:1 the loopback address 0:0:0:0:0:0:0:0 the unspecified addresses may be represented as: 1080::8:800:200C:417A a unicast address FF01::43 a multicast address ::1 the loopback address :: the unspecified addresses 3. An alternative form that is sometimes more convenient when dealing with a mixed environment of IPv4 and IPv6 nodes is x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of the six high-order 16-bit pieces of the address, and the 'd's are the decimal values of the four low-order 8-bit pieces of the address (standard IPv4 representation). Examples: 0:0:0:0:0:0:13.1.68.3 0:0:0:0:0:FFFF:129.144.52.38 or in compressed form: ::13.1.68.3 ::FFFF:129.144.52.38
DIAGNOSTICS
The constant INADDR_NONE is returned by inet_addr() and inet_network() for malformed requests.
ERRORS
The inet_ntop() and inet_pton() functions may fail with [EAFNOSUPPORT] The value of af was not AF_INET or AF_INET6. The inet_ntop() function may fail with [ENOSPC] The size indicated for dst was too small to store the presentation form of the network address.
SEE ALSO
byteorder(3), gethostbyname(3), getnetent(3), inet_net(3), hosts(5), networks(5) IP Version 6 Addressing Architecture, RFC 2373, July 1998. Basic Socket Interface Extensions for IPv6, RFC 3493, February 2003.
STANDARDS
The inet_ntop() and inet_pton() functions conform to IEEE Std 1003.1-2001 (``POSIX.1''). Note that inet_pton() does not accept 1-, 2-, or 3-part dotted addresses; all four parts must be specified. Additionally all four parts of a dotted address must be decimal. This is a narrower input set than that accepted by inet_aton().
HISTORY
The inet_addr(), inet_network(), inet_makeaddr(), inet_lnaof() and inet_netof() functions appeared in 4.2BSD. They were changed to use in_addr_t in place of unsigned long in NetBSD 2.0. The inet_aton() and inet_ntoa() functions appeared in 4.3BSD. The inet_pton() and inet_ntop() functions appeared in BIND 4.9.4 and thence NetBSD 1.3; they were also in X/Open Networking Services Issue 5.2 (``XNS5.2'').
BUGS
The value INADDR_NONE (0xffffffff) is a valid broadcast address, but inet_addr() cannot return that value without indicating failure. The newer inet_aton() function does not share this problem. The problem of host byte ordering versus network byte ordering is confus- ing. The string returned by inet_ntoa() resides in a static memory area. The function inet_addr() should return a struct in_addr. The function inet_network() does not support byte rearrangement for one, two, and three part addresses. NetBSD 9.1 July 25, 2012 NetBSD 9.1
Powered by man-cgi (2024-03-18). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.