cdce(4) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
CDCE(4)                 NetBSD Kernel Interfaces Manual                CDCE(4)


NAME
cdce -- USB Communication Device Class Ethernet driver
SYNOPSIS
cdce* at uhub? port ?
DESCRIPTION
The cdce driver provides support for USB Host-to-Host (aka USB-to-USB) bridges and USB-to-Ethernet adapters based on the USB Communication Device Class (CDC) and Ethernet subclass, including the following: · Acer Labs USB 2.0 Data Link · Anker A7611 · DIEWU USB-DW8152 · G.Mate YP3X00 · Huawei E5573s-320s · Motorola USBNET · NetChip EthernetGadget · Prolific PL-2501 · Realtek RTL8152B Ethernet controller · Sharp Zaurus The USB bridge appears as a regular network interface on both sides, transporting Ethernet frames. For more information on configuring this device, see ifconfig(8). USB 1.x bridges support speeds of up to 12Mbps, and USB 2.0 speeds of up to 480Mbps. Packets are received and transmitted over separate USB bulk transfer end- points. The cdce driver does not support different media types or options.
DIAGNOSTICS
cdce%d: no union descriptor The driver couldn't fetch an interface descriptor from the USB device. For a manually added USB vendor/product, the CDCE_NO_UNION flag can be tried to work around the missing descrip- tor. cdce%d: no data interface cdce%d: could not read endpoint descriptor cdce%d: unexpected endpoint cdce%d: could not find data bulk in/out For a manually added USB ven- dor/product, these errors indicate that the bridge is not compatible with the driver. cdce%d: watchdog timeout A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired. cdce%d: no memory for rx list -- packet dropped! Memory allocation through MGETHDR or MCLGET failed, the system is running low on mbufs. cdce%d: abort/close rx/tx pipe failed cdce%d: rx/tx list init failed cdce%d: open rx/tx pipe failed cdce%d: usb error on rx/tx
SEE ALSO
arp(4), intro(4), netintro(4), usb(4), ifconfig(8) Universal Serial Bus Class Definitions for Communication Devices, http://www.usb.org/developers/devclass_docs/usbcdc11.pdf. Data sheet Prolific PL-2501 Host-to-Host Bridge/Network Controller, http://tech.prolific.com.tw/visitor/fcabdl.asp?fid=20679530.
HISTORY
The cdce device driver first appeared in OpenBSD 3.6 and NetBSD 3.0.
AUTHORS
The cdce driver was written by Craig Boston <craig@tobuj.gank.org> based on the aue(4) driver written by Bill Paul <wpaul@windriver.com> and ported to OpenBSD by Daniel Hartmeier <dhartmei@openbsd.org>.
CAVEATS
Many USB devices notoriously fail to report their class and interfaces correctly. Undetected products might work flawlessly when their vendor and product IDs are added to the driver manually. NetBSD 9.1 March 23, 2019 NetBSD 9.1
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.