ast(4) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
AST(4)                  NetBSD Kernel Interfaces Manual                 AST(4)


NAME
ast -- multiplexing serial communications interface
SYNOPSIS
ast0 at isa? port 0x1a0 irq 5 com2 at ast? slave ? com3 at ast? slave ? com4 at ast? slave ? com5 at ast? slave ?
DESCRIPTION
The ast driver provides support for boards that multiplex together up to four EIA RS-232C (CCITT V.28) communications interfaces. Apparently the original maker of hardware using this multiplexing protocol was AST. Each ast device is the master device for up to four com devices. The kernel configuration specifies these com devices as slave devices of the ast device, as shown in the synopsis. The slave ID given for each com device determines which bit in the interrupt multiplexing register is tested to find interrupts for that device. The port specification for the ast device is used to compute the base addresses for the com subde- vices and the port for the interrupt multiplexing register.
FILES
/dev/tty0?
SEE ALSO
com(4)
HISTORY
The ast driver was written by Roland McGrath and placed into the public domain. NetBSD 9.0 March 30, 1994 NetBSD 9.0
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.