splsched(9) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
SPL(9)                 NetBSD Kernel Developer's Manual                 SPL(9)


NAME
spl, spl0, splhigh, splvm, splbio, splnet, spltty, splsched, splsoftbio, splsoftclock, splsoftnet, splsoftserial, splx -- modify system interrupt priority level
SYNOPSIS
#include <sys/intr.h> void spl0(void); int splhigh(void); int splsched(void); int splvm(void); int splbio(void); int splnet(void); int spltty(void); int splsoftbio(void); int splsoftclock(void); int splsoftserial(void); int splsoftnet(void); void splx(int s);
DESCRIPTION
These functions raise and lower the interrupt priority level. They are used by kernel code to block interrupts in critical sections, in order to protect data structures. In a multi-CPU system, these functions change the interrupt priority level on the local CPU only. In general, device drivers should not make use of these interfaces. To ensure correct synchronization, device driv- ers should use the condvar(9), mutex(9), and rwlock(9) interfaces. Interrupt priorities are arranged in a strict hierarchy, although some- times levels may be equivalent (overlap). The hierarchy means that rais- ing the IPL to any level will block interrupts at that level, and at all lower levels. The hierarchy is used to minimize data loss due to inter- rupts not being serviced in a timely fashion. The levels may be divided into two groups: hard and soft. Hard inter- rupts are generated by hardware devices. Soft interrupts are a way of deferring hardware interrupts to do more expensive processing at a lower interrupt priority, and are explicitly scheduled by the higher-level interrupt handler. Software interrupts are further described by softint(9). Note that hard interrupt handlers do not possess process (thread) context and so it is not valid to use kernel facilities that may attempt to sleep from a hardware interrupt. For example, it is not possible to acquire a reader/writer lock from a hardware interrupt. Soft interrupt handlers possess limited process context and so may sleep briefly in order to acquire a reader/writer lock or adaptive mutex, but may not sleep for any other reason. In order of highest to lowest priority, the priority-raising functions along with their counterpart symbolic tags are: splhigh(), IPL_HIGH Blocks all hard and soft interrupts, including the highest level I/O interrupts, such as interrupts from serial interfaces and the statistics clock (if any). It is also used for code that cannot tolerate any interrupts. Code running at this level may not (in general) directly access machine independent kernel services. For example, it is illegal to call the kernel printf() function or to try and allocate mem- ory. The methods of synchronization available are: spin mutexes and scheduling a soft interrupt. Generally, all code run at this level must schedule additional processing to run in a soft- ware interrupt. Code with thread context running at this level must not use a kernel interface that may cause the current LWP to sleep, such as the condvar(9) interfaces. Interrupt handlers at this level cannot acquire the global ker- nel_lock and so must be coded to ensure correct synchronization on multiprocessor systems. splsched(), IPL_SCHED Blocks all medium priority hardware interrupts, such as inter- rupts from audio devices, and the clock interrupt. Interrupt handlers running at this level endure the same restrictions as at IPL_HIGH, but may access scheduler inter- faces, and so may awaken LWPs (light weight processes) using the condvar(9) interfaces, and may schedule callouts using the callout(9) interfaces. Code with thread context running at this level may sleep via the condvar(9) interfaces, and may use other kernel facilities that could cause the current LWP to sleep. splvm(), IPL_VM Blocks hard interrupts from ``low'' priority hardware inter- rupts, such as interrupts from network, block I/O and tty devices. Code running at this level endures the same restrictions as at IPL_SCHED, but may use the deprecated malloc(9) or endorsed pool_cache(9) interfaces to allocate memory. At the time of writing, the global kernel_lock is automatically acquired for interrupts at this level, in order to support device drivers that do not provide their own multiprocessor syn- chronization. A future release of the system may allow the automatic acquisition of kernel_lock to be disabled for individ- ual interrupt handlers. splbio(), splnet(), and spltty() are synonyms for splvm(). Their use is deprecated; all new code should use splvm(). splsoftserial(), IPL_SOFTSERIAL Blocks soft interrupts at the IPL_SOFTSERIAL symbolic level. This is the first of the software levels. Soft interrupts at this level and lower may acquire reader/writer locks or adaptive mutexes. splsoftnet(), IPL_SOFTNET Blocks soft interrupts at the IPL_SOFTNET symbolic level. splsoftbio(), IPL_SOFTBIO Blocks soft interrupts at the IPL_SOFTBIO symbolic level. splsoftclock(), IPL_SOFTCLOCK Blocks soft interrupts at the IPL_SOFTCLOCK symbolic level. This is the priority at which callbacks generated by the callout(9) facility runs. One function lowers the system priority level: spl0(), IPL_NONE Unblocks all interrupts. This should rarely be used directly; splx() should be used instead. The splx() function restores the system priority level to the one encoded in s, which must be a value previously returned by one of the other spl functions.
SEE ALSO
condvar(9), i386/splraise(9), kpreempt(9), mutex(9), rwlock(9)
HISTORY
In 4.4BSD, splnet() was used to block network software interrupts. Most device drivers used splimp() to block hardware interrupts. To avoid unnecessarily blocking other interrupts, in NetBSD 1.1 a new function was added that blocks only network hardware interrupts. For consistency with other spl functions, the old splnet() function was renamed to splsoftnet(), and the new function was named splnet(). Originally, splsoftclock() lowered the system priority level. During the NetBSD 1.5 development cycle, spllowersoftclock() was introduced and the semantics of splsoftclock() were changed. The splimp() call was removed from the kernel between NetBSD 1.5 and NetBSD 1.6. The function of splimp() was replaced by splvm() and code which abused the semantics of splimp() was changed to not mix interrupt priority levels. Between NetBSD 4.0 and NetBSD 5.0, the hardware levels were reduced in number and a strict hierarchy defined. NetBSD 9.0 April 6, 2017 NetBSD 9.0
Powered by man-cgi (2020-09-24). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.