ixg(4) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
IXG(4)                  NetBSD Kernel Interfaces Manual                 IXG(4)


NAME
ixg -- Intel(R) 10Gb Ethernet driver
SYNOPSIS
ixg* at pci? dev ? function ?
DESCRIPTION
The ixg driver provides support for PCI 10Gb Ethernet adapters based on the Intel(R) 82598EB, 82599, X540 and X550 Ethernet Controllers. The driver supports Jumbo Frames, TCP Segmentation Offload (TSO). For questions related to hardware requirements, refer to the documenta- tion supplied with your Intel 10GbE adapter. All hardware requirements listed apply to use with NetBSD. Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility con- figures the adapter to receive and transmit Jumbo Frames. On NetBSD, the maximum MTU size for Jumbo Frames is 9000 bytes. This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8).
DIAGNOSTICS
ixg%d: Unable to allocate bus resource: memory A fatal initialization error has occurred. ixg%d: Unable to allocate bus resource: interrupt A fatal initialization error has occurred. ixg%d: watchdog timeout -- resetting The device has stopped responding to the network, or there is a problem with the network connection (cable).
SUPPORT
For general information and support, go to the Intel support website at: .: http://www.intel.com/support/
SEE ALSO
arp(4), ixv(4), netintro(4), vlan(4), ifconfig(8)
HISTORY
The ixg device driver comes from FreeBSD, where it is called ixgbe. It first appeared in NetBSD 6.0.
AUTHORS
The ixg driver was written by Intel Corporation <freebsdnic@mailbox.intel.com>. It was imported from FreeBSD into NetBSD by David Young <dyoung@NetBSD.org>.
BUGS
The hardware supports a maximum MTU of 16114 bytes, but the NetBSD port of the driver supports only 9000 bytes. NetBSD 9.0 May 9, 2018 NetBSD 9.0
Powered by man-cgi (2020-09-24). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.