mcp3kadc(4) - NetBSD Manual Pages

MCP3KADC(4)             NetBSD Kernel Interfaces Manual            MCP3KADC(4)


NAME
mcp3kadc -- Microchip 3x0x SAR analog to digital converter
SYNOPSIS
mcp3kadc* at spi? slave ? flags N
DESCRIPTION
The mcp3kadc driver reports the current voltage on the chip's ADC chan- nels through the envsys(4) API. The driver calculates these values according to the currently selected reference voltage (Vref). It can be changed through the sysctl(8) node hw.mcp3kadc0.vref. The following table shows the supported chips. The type of the chip can be selected with the flags argument in the config file. Designation Resolution Input Channels flags MCP3001 10 bits 1 0 MCP3002 10 bits 2 1 MCP3004 10 bits 4 2 MCP3008 10 bits 8 3 MCP3201 12 bits 1 4 MCP3202 12 bits 2 5 MCP3204 12 bits 4 6 MCP3208 12 bits 8 7 MCP3301 13 bits 1 8 MCP3302 13 bits 4 9 MCP3304 13 bits 8 10
SYSCTL VARIABLES
The following sysctl(3) variables are provided: hw.mcp3kadc0.vref Defines the reference voltage on the chip's Vref pin in milli- volts (mV). It defaults to the ADC's maximum output value + 1 in millivolts (e.g., 4096 for a 12-bit ADC).
SEE ALSO
envsys(4), spi(4), sysctl(8)
HISTORY
The mcp3kadc driver first appeared in NetBSD 8.0.
AUTHORS
The mcp3kadc driver was written by Frank Wille. NetBSD 8.2 August 18, 2015 NetBSD 8.2

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.