intro(4) - NetBSD Manual Pages

INTRO(4)             NetBSD/atari Kernel Interfaces Manual            INTRO(4)


NAME
intro -- introduction to atari special files and hardware support
DESCRIPTION
This section describes the special files, related driver functions, and networking support available in the system. In this part of the manual, the SYNOPSIS section of each configurable device gives a sample specifi- cation for use in constructing a system description for the config(1) program. The DIAGNOSTICS section lists messages which may appear on the console and/or in the system error log /var/log/messages due to errors in device operation; see syslogd(8) for more information. This section contains both devices which may be configured into the sys- tem and network related information. The networking support is intro- duced in netintro(4).
LIST OF PLATFORMS SUPPORTED
Platforms supported by the atari port: TT030 A standard TT030 model with at least 4Mb of RAM. Falcon A standard Falcon with at least 4Mb of RAM. An FPU is not required as the default kernels include FP-emulation sup- port. Hades A standard Hades with either an 040 or 060 processor and at least 8 Mb of RAM.
DEVICE SUPPORT
This section describes the hardware supported on the atari (atari-clone) platform. Software support for these devices comes in two forms. A hardware device may be supported with a character or block device driver, or it may be used within the networking subsystem and have a network interface driver. Block and character devices are accessed through files in the file system of a special type; see mknod(8). Network interfaces are indirectly accessed through the interprocess communication facilities provided by the system; see socket(2). A hardware device is identified to the system at configuration time and the appropriate device or network interface driver is then compiled into the system. When the resultant system is booted, the autoconfiguration facilities in the system probe for the device and, if found, enable the software support for it. If a device does not respond at autoconfigura- tion time it is not accessible at any time afterwards. To enable a device which did not autoconfigure, the system must be rebooted. The autoconfiguration system is described in autoconf(4). A list of the supported devices is given below.
LIST OF DEVICES
The devices listed below are supported in this incarnation of the system. Devices are indicated by their functional interface. Not all supported devices are listed, not all devices exist on all models. Standard builtin devices: clock System clock fd Floppy device as found on the Falcon/TT030 grf The standard internal video as found on the Falcon and TT030. grfet The et4000-PCI video as found on the HADES hdfd Floppy device as found on the Hades (NEC 765 compatible) isa ISA I/O bus (Hades only) kbd Standard keyboard lpt Parallel port device interface mem Main memory interface ncrscsi Onboard 5380 SCSI-bus nvr Non-volatile RAM interface pci PCI I/O bus (Hades only). ser0 Serial1 (when connector available). vme VME I/O bus wd IDE interface (not on TT030) zs0 Serial2 and modem2 ports.
SEE ALSO
config(1), autoconf(4), netintro(4)
HISTORY
The atari intro appeared in NetBSD 1.3. NetBSD 8.2 June 6, 2000 NetBSD 8.2

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.