sab(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
SAB(4)              NetBSD/sparc64 Kernel Interfaces Manual             SAB(4)


NAME

     sab, sabtty -- Infineon 82532 Enhanced Serial Communication Controller
     (ESCC2)


SYNOPSIS

     sab*    at ebus?
     sabtty* at sab? channel ?


DESCRIPTION

     The sab driver provides TTY support for the Infineon (previously Siemens)
     82532 serial communications interface found in many Sun Ultra worksta-
     tions and servers.

     Input and output speeds for each line may be set to any baud rate in the
     following list: 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
     4800, 9600, 19200, 38400, 57600, 76800, 115200, 153600, 230400, 307200,
     460800, 614400, 921600.


NOTES

     The speed cannot be changed on the ports connected the Remote System
     Control (RSC) on a Sun Enterprise[tm] 250 Server (ttyh2 and ttyh3).
     These ports are fixed at 115200 baud.


FILES

     /dev/ttyh[0123]
                  serial ports


DIAGNOSTICS

     sab*: ring overflow
             The software input "ring" has overflowed.  This usually means
             input flow-control is not configured correctly (i.e. incorrect
             cable wiring).


SEE ALSO

     tty(4), zstty(4)


HISTORY

     The sabtty driver first appeared in OpenBSD 3.1 and was then ported to
     NetBSD 2.0.


AUTHORS

     Jason L. Wright

NetBSD 8.0                     January 18, 2010                     NetBSD 8.0