cpu_rootconf(9) - NetBSD Manual Pages

CPU_ROOTCONF(9)        NetBSD Kernel Developer's Manual        CPU_ROOTCONF(9)


NAME
cpu_rootconf, rootconf, setroot -- root file system setup
SYNOPSIS
#include <sys/types.h> #include <sys/systm.h> void cpu_rootconf(void); void rootconf(void); void setroot(device_t bootdv, int bootpartition);
DESCRIPTION
The cpu_rootconf() is a machine-dependent interface invoked during system bootstrap to determine the root file system device and initialize machine-dependent file system state. cpu_rootconf() provides the global variables booted_device, booted_partition, booted_startblk, booted_nblks, and bootspec. cpu_rootconf invokes the machine-independent function rootconf which calls the function setroot to record the root device and the root partition information for use in machine-independent code. rootconf may adjust the global variables and determines the parameters for setroot. This is for example used to translate a device and parti- tion number provided by the bootloader into a disk wedge device covering the same partition. If the bootloader already identified a disk wedge, it passes a non-zero value for booted_nblks, then booted_startblk and booted_nblks specify a disk wedge as the boot device. setroot evaluates several sources to identify the root device in the fol- lowing order until a valid device is selected: 1. The kernel configuration variable rootspec which is set by config(1). The value is the name and unit of the root device, e.g., "sd0" (disk) or "dk0" (wedge) or "le0" (network) or the prefix "wedge:" followed by the name of the disk wedge. For disk devices the partition passed as argument to setroot is used. 2. The variable bootspec following the same syntax. 3. The result of an interactive query of the root device if boothowto has set the flag RB_ASKNAME. The input uses the same syntax as the previous sources. Here also the kernel dump device is queried. 4. The boot device and partition passed as arguments. If a root device cannot be selected, setroot sets the RB_ASKNAME flag and loops. Otherwise the kernel dump device is identified in a similar manner from 1. The result of a previous interactive query. See above. 2. The kernel configuration variable dumpspec, if set. 3. The second partition of the root device, if it is a regular disk. 4. The first disk wedge device of type DKW_PTYPE_SWAP.
SEE ALSO
config(1), dk(4), boot(8), boothowto(9) NetBSD 8.0 November 11, 2014 NetBSD 8.0

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.