amldb(8) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
AMLDB(8)                NetBSD System Manager's Manual                AMLDB(8)

amldb -- executing and debugging AML interpreter (with DSDT files)
amldb [-dhst] dsdt_file ...
The amldb utility parses the DSDT (Differentiated System Description Ta- ble) files, which usually are acquired from ACPI BIOS, and executes the sequence of ACPI Control Methods described in AML (ACPI Machine Language) with its AML interpreter. The amldb utility also has a simple ACPI vir- tual machine. During execution of the Control Methods each access to the region, such as SystemMemory, SystemIO, PCI_Config, does not affect the real hardware but only the virtual machine. Because the sequence of vir- tual accesses is maintained in user space, AML interpreter developers need not worry about any effect on hardware when they analyze DSDT data files. They can develop and debug the interpreter, even if the machine has no ACPI BIOS. The developer will need to acquire a DSDT data file from any machine with ACPI BIOS through acpidump(8). The DSDT is a table, a part of the whole ACPI memory table located in somewhere in the BIOS area (0xa0000 - 0x100000). It includes such information as the detailed hardware infor- mation for PnP, and the set of procedures which perform power management from the OS. The information is stored in AML format. The AML interpreter can execute any of the Control Methods specified by users. When executed, it interprets the byte sequence in the Control Method of DSDT, and disassembles the opcodes that it recognizes into ASL (ACPI Source Language) format to be displayed. If it encounters one of more accesses to the region such as SystemMemory in executing the Control Methods, its ACPI Virtual Machine simulates the input/output operations to the resources in the region. In writing to a certain region, the ACPI Virtual Machine prepares a piece of memory cor- responding to its address, if necessary, and holds the specified value in the memory as the region contents. In reading from a certain region, it fetches the value in the memory (region contents), prompts with it as the following: DEBUG[read(0, 0x100b6813)&mask:0x1](default: 0x1 / 1) >> for users to have the opportunity to modify it, and hands it to the AML interpreter. In case that there is no corresponding region in the AML Virtual Machine, the value zero is handed. The interpreter continues to maintain all of the region contents until amldb terminates. You can specify their initial values with the file region.ini in the current directory. If it is executed with -d option, it dumps the final status of all of its region contents to the file region.dmp when it terminates. Each line of there files consists of the following fields, separated by tabs; region type, address, and value. Region types are specified as follows; Value Region type 0 SystemMemory 1 SystemIO 2 PCI_Config 3 EmbeddedControl 4 SMBus Interactive commands are described below: s Single step: Performs single-step execution of the current Con- trol Method. If the next instruction is an invocation of another Control Method, the step execution will continue in the following Control Method. n Step program: Performs single-step execution of the current Con- trol Method. Even if the next instruction is an invocation of another Control Method, the step execution will not continue. c Continue program being debugged: Resumes execution of the AML interpreter. Because the current amldb has no way of breakpoint, this command might not so much useful. q Quit method execution: Terminates execution of the current Con- trol Method. If amldb is not in execution, this command causes to input the next DSDT data file. If there are no next DSDT data files, it terminates amldb itself. t Show local name space tree and variables: Displays the structure of the ACPI namespace tree. If amldb is in execution, this com- mand displays the structure that relates to the objects, argu- ments, and local variables below the scope of the current Control Method. i Toggle region input prompt: Switches whether the prompt for modi- fying the value read from the region contents be showed or not. Default is On. o Toggle region output prompt: Switches whether the prompt for mod- ifying the value to be written to the region contents will be shown or not. The default is Off. m Show memory management statistics: Displays the current statis- tics of the memory management system on the AML interpreter. r method Run specified method: Executes the specified Control Method. If it requires one or more arguments, a prompt such as the following appears; Method: Arg 1 From 0x280626ce To 0x28062775 Enter argument values (ex. number 1 / string foo). 'q' to quit. Arg0 ? For each argument, a pair of type string and value delimited by one or more spaces can be entered. Now only number and string can be specified as the type string. In the current implementa- tion, only the first character of the type string, such as n or s, is identified. For example, we can enter as follows: Arg0 ? n 1 f string Find named objects from namespace: Lists the named objects that includes the specified string as the terminate elements searching from the ACPI namespace. For the namespace is expressed as the sequence of four-character elements, appropriate number of addi- tional underscore (`_') characters are necessary for specifying objects which have less than four character string. Unless addi- tional underscores specified, matching occurs as the beginning of word with the specified number of characters. h Show help messsage: Displays the command summary of amldb.
Exactly one of the following options must be specified. Otherwise, amldb shows its usage and terminates. -d Dump the final status of all of the region contents in the ACPI Virtual Machine to the file region.dmp. -h Terminate with the usage of this command. -s Display the statistics of the memory management system on the AML interpreter when amldb terminates. -t Display the tree structure of ACPI namespace after the DSDT data file is read.
region.ini region.dmp
The following is an example including, invoking the amldb, searching _PRS (Possible Resource Settings) objects, and executing the _PTS (Prepare To Sleep) Control Method by the AML interpreter. % amldb p2b.dsdt.dat Loading p2b.dsdt.dat...done AML>f _PRS \_SB_.PCI0.ISA_.PS2M._PRS. \_SB_.PCI0.ISA_.IRDA._PRS. \_SB_.PCI0.ISA_.UAR2._PRS. \_SB_.PCI0.ISA_.UAR1._PRS. \_SB_.PCI0.ISA_.ECP_._PRS. \_SB_.PCI0.ISA_.LPT_._PRS. \_SB_.PCI0.ISA_.FDC0._PRS. \_SB_.LNKD._PRS. \_SB_.LNKC._PRS. \_SB_.LNKB._PRS. \_SB_.LNKA._PRS. AML>r _PTS Method: Arg 1 From 0x2805f0a3 To 0x2805f0db Enter argument values (ex. number 1 / string foo). 'q' to quit. Arg0 ? n 5 ==== Running _PTS. ==== AML>s [\_PTS. START] If(LNot(LEqual(Arg0, 0x5))) AML> If(LEqual(Arg0, 0x1)) AML> If(LEqual(Arg0, 0x2)) AML> Store(One, TO12) [aml_region_write(1, 1, 0x1, 0xe42c, 0x18, 0x1)] amldb: region.ini: No such file or directory [1:0x00@0xe42f]->[1:0x01@0xe42f] [write(1, 0x1, 0xe42f)] [aml_region_read(1, 1, 0xe42c, 0x18, 0x1)] [1:0x01@0xe42f] DEBUG[read(1, 0xe42f)&mask:0x1](default: 0x1 / 1) >> [read(1, 0xe42f)->0x1] AML> Or(Arg0, 0xf0, Local2)[Copy number 0xf5] AML>t _PTS Method: Arg 1 From 0x2805f0a3 To 0x2805f0db Arg0 Num:0x5 Local2 Num:0xf5 AML>s Store(Local2, DBG1) [aml_region_write(1, 1, 0xf5, 0x80, 0x0, 0x8)] [1:0x00@0x80]->[1:0xf5@0x80] [write(1, 0xf5, 0x80)] [aml_region_read(1, 1, 0x80, 0x0, 0x8)] [1:0xf5@0x80] DEBUG[read(1, 0x80)&mask:0xf5](default: 0xf5 / 245) >> [read(1, 0x80)->0xf5] AML> [\_PTS. END] _PTS Method: Arg 1 From 0x2805f0a3 To 0x2805f0db NO object ==== _PTS finished. ==== AML>q %
acpi(4), acpidump(8)
The amldb utility appeared in FreeBSD 5.0.
Takanori Watanabe <> Mitsuru IWASAKI <> Yasuo YOKOYAMA <> Some contributions made by Chitoshi Ohsawa <>, Takayasu IWANASHI <>, Norihiro KUMAGAI <>, Kenneth Ingham <>, and Michael Lucas <>.
The ACPI virtual machine does not completely simulate the behavior of a machine with an ACPI BIOS. In the current implementation, the ACPI vir- tual machine only reads or writes the stored values by emulating access to regions such as SystemMemory. Because the AML interpreter interprets and disassembles simultaneously, it is impossible to implement such features as setting breakpoints with the specified line number in ASL. Setting breakpoints at certain Control Methods, which is not very difficult, has not yet implemented because nobody has ever needed it. NetBSD 8.0 August 31, 2000 NetBSD 8.0
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.