se(4) - NetBSD Manual Pages

SE(4)                   NetBSD Kernel Interfaces Manual                  SE(4)


NAME
se -- Cabletron EA41x SCSI bus Ethernet interface driver
SYNOPSIS
se* at scsibus? target ? lun ?
DESCRIPTION
The se driver supports the Cabletron EA41x SCSI bus Ethernet interface. This driver is a bit unusual. It must look like a network interface and it must also appear to be a SCSI device to the SCSI system. In addition, to facilitate SCSI commands issued by userland programs, there are open(), close(), and ioctl() entry points. This allows a user program to, for example, display the EA41x statistic and download new code into the adaptor - functions which can't be performed through the ifconfig(8) interface. Normal operation does not require any special userland program.
SEE ALSO
scsi(4), ifconfig(8)
AUTHORS
Ian Dall <ian.dall@dsto.defence.gov.au> Acknowledgement: Thanks are due to Philip L. Budne <budd@cs.bu.edu> who reverse engineered the EA41x. In developing this code, Phil's userland daemon "etherd", was referred to extensively in lieu of accurate documen- tation for the device.
BUGS
The EA41x doesn't conform to the SCSI specification in much at all. About the only standard command supported is "inquiry". Most commands are 6 bytes long, but the recv data is only 1 byte. Data must be received by periodically polling the device with the recv command. NetBSD 7.1.2 February 3, 1997 NetBSD 7.1.2

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.