vnconfig(8) - NetBSD Manual Pages

VNDCONFIG(8)            NetBSD System Manager's Manual            VNDCONFIG(8)


NAME
vndconfig -- configure vnode disks
SYNOPSIS
vndconfig [-crvz] [-f disktab] [-t typename] vnode_disk regular_file [geomspec] vndconfig -u [-Fv] vnode_disk vndconfig -l [vnode_disk]
DESCRIPTION
The vndconfig command configures vnode pseudo disk devices. It will as- sociate the vnode disk vnode_disk with the regular file regular_file allowing the latter to be accessed as though it were a disk. Hence a regular file within the filesystem can be used for swapping or can con- tain a filesystem that is mounted in the name space. The vnode_disk is a special file of raw partition or name of vnode disk like vnd0. Options indicate an action to be performed: -c Configures the device. If successful, references to vnode_disk will access the contents of regular_file. If geomspec is specified, the vnode device will emulate the spec- ified disk geometry. The format of the geomspec argument is: secsize/nsectors/ntracks/ncylinders If geometry is not specified, the kernel will choose a default based on 1MB cylinders. secsize is the number of bytes per sec- tor. It must be an even multiple of 512. nsectors is the number of sectors per track. ntracks is the number of tracks per cylin- der. ncylinders is the number of cylinders in the device. -F Force unconfiguration if the device is in use. Does not imply -u. -f disktab Specifies that the -t option should look up in disktab instead of in /etc/disktab. -l List the vnd devices and indicate which ones are in use. If a specific vnode_disk is given, then only that will be described. -t typename If configuring the device, look up typename in /etc/disktab and use the geometry specified in the entry. This option and the geomspec argument are mutually exclusive. -r Configure the device as read-only. -u Unconfigures the device. -v Print messages to stdout describing actions taken. -z Assume that regular_file is a compressed disk image in cloop2 format, and configure it read-only. See the vndcompress(1) man- page on how to create such an image. If no action option is given, -c is assumed.
FILES
/dev/rvnd?? /dev/vnd?? /etc/disktab
EXAMPLES
vndconfig vnd0 /tmp/diskimage or vndconfig /dev/rvnd0c /tmp/diskimage Configures the vnode disk vnd0. Please note that use of the second form of the command is discouraged because it requires knowledge of the raw partition which varies between architectures. vndconfig vnd0 /tmp/floppy.img 512/18/2/80 Configures the vnode disk vnd0 emulating the geometry of 512 bytes per sector, 18 sectors per track, 2 tracks per cylinder, and 80 cylinders total. vndconfig -t floppy vnd0 /tmp/floppy.img Configures the vnode disk vnd0 using the geometry specified in the floppy entry in /etc/disktab. vndconfig -u vnd0 Unconfigures the vnd0 device.
SEE ALSO
vndcompress(1), opendisk(3), vnd(4), mount(8), swapctl(8), umount(8)
HISTORY
The vndconfig command appeared in NetBSD 1.0.
BUGS
This command should really be named vndconfig. NetBSD 7.0 June 9, 2013 NetBSD 7.0

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.