terminfo(5) - NetBSD Manual Pages

TERMINFO(5)               NetBSD File Formats Manual               TERMINFO(5)


NAME
terminfo -- terminal capability definition
DESCRIPTION
terminfo describes the capabilities of terminals, used by programs such as vi(1), rogue(6) and libraries such as curses(3). The terminfo source described here needs to be compiled with tic(1) to be of any use. Entries in terminfo consist of a number of comma separated fields. White space after each comma is ignored. Embedded commas must be escaped by using a backslash. Lines beginning with `#' in the first column are treated as comments. Blank lines are ignored. The header line must begin in column one and end with a comma. Inside the header line are terminal name and aliases, separated by vertical bars, the last one being the long description of the terminal. Capability lines then follow, starting on column two and ending with a comma. Each capability is listed by its name, followed by its value if applicable. Booleans have no values, numeric values are prefixed by `#' and strings are prefixed by `='. Numbers can range from 0 to 32767 and string values can be up to 1000 characters long. This implementation supports strings upto 32767 characters long, including the NUL termina- tor. Some escapes are available for strings - both \E and \e map to the ESC character, ^X maps to a control-X for any appropriate X, and the sequences \n, \r, \t, \b and \f map to linefeed, return, tab, backspace, and formfeed respectively. Any character can be escaped in octal, such as \072. If you need to encode a NUL character, it should be escaped as \200. A delay in milliseconds may appear anywhere in a string capability, pre- fixed with a dollar sign and enclosed by angled brackets, such as $<5>. String Parameters String capabilities sometimes require parameters. Normally this just involves replacing the parameter with a supplied variable; however, there are cases where the variable needs to be manipulated or used in condi- tional expressions. A stack is also provided for simple pop and push operations. The below % encodings have the following meanings: %% outputs % %[[:]flags][width[.precision]][doxXs] flags are ``[-+#]''. Prefix with `:' to avoid interpreting ``%-'' as an operator. %c pop a parameter and print the character representation of it. %s pop a parameter and print the string representation of it. %p[1-9] push the parameter [1-9]. %P[a-z] pop a parameter and push it to dynamic variable [a-z]. %g[a-z] push the dynamic variable [a-z]. %P[A-Z] pop a parameter and push it to static variable [a-z]. %g[A-Z] push the dynamic variable [A-Z]. Static variables persist over tparm() whereas dynamic variables do not. %'c' char constant c. %{nn} integer constant nn. %l push the string length of the previously popped parameter. %+ %- %* %/ %m arithmetic: pop two parameters and push the result. %& %| %^ bit operations: pop two parameters and push the result. %! %~ unary operations: pop two parameters and push the result. %i add 1 to parameters 1 and 2. %? expr %t then %e else %; If expr equates to zero then control passes to the optional else part. Boolean Capabilities Long name Code TC Description auto_left_margin bw bw cub1 wraps from column 0 to last column auto_right_margin am am Terminal has automatic margins back_color_erase bce ut Screen erased with background colour can_change ccc cc Terminal can re-define existing colour ceol_standout_glitch xhp xs Standout not erased by overwriting (hp) col_addr_glitch xhpa YA Only positive motion for hpa/mhba caps cpi_changes_res cpix YF Changing character pitch changes resolution cr_cancels_micro_mode crxm YB Using cr turns off micro mode dest_tabs_magic_smso xt xt Destructive tabs, magic smso char (t1061) eat_newline_glitch xenl xn Newline ignored after 80 columns (Concept) erase_overstrike eo eo Can erase overstrikes with a blank line generic_type gn gn Generic line type (e.g. dialup, switch) hard_copy hc hc Hardcopy terminal hard_cursor chts HC Cursor is hard to see has_meta_key km km Has a meta key (shift, sets parity bit) has_print_wheel daisy YC Printer needs operator to change character set has_status_line hs hs Has extra status line"" hue_light_saturation hls hl Terminal only uses HLS colour notion (Tektronix) insert_null_glitch in in Insert mode distinguishes nulls lpi_changes_yes lpix YG Changing line pitch changes resolution memory_above da da Display may be retained above the screen memory_below db db Display may be retained below the screen move_insert_mode mir mi Safe to move while in insert mode move_standout_mode msgr ms Safe to move in standout modes needs_xon_xoff nxon nx Padding won't work, xon/xoff required no_esc_ctlc xsb xb Beehive (f1=escape, f2=ctrl C) no_pad_char npc NP Pad character doesn't exist non_dest_scroll_region ndscr ND Scrolling region is nondestructive non_rev_rmcup nrrmc NR smcup does not reverse rmcup over_strike os os Terminal overstrikes on hard-copy terminal prtr_silent mc5i 5i Printer won't echo on screen row_addr_glitch xvpa YD Only positive motion for vpa/mvpa caps semi_auto_right_margin sam YE Printing in last column causes cr status_line_esc_ok eslok es Escape can be used on the status line tilde_glitch hz hz Hazeltine; can't print tilde (~) transparent_underline ul ul Underline character overstrikes xon_xoff xon xo Terminal uses xon/xoff handshaking Numeric Capabilities Long name Code TC Description bit_image_entwining bitwin Yo Number of passes for each bit-map row bit_image_type bitype Yp Type of bit image device buffer_capacity bufsz Ya Number of bytes buffered before printing buttons btns BT Number of buttons on the mouse columns cols co Number of columns in a line dot_horz_spacing spinh Yc Spacing of dots horizontally in dots per inch dot_vert_spacing spinv Yb Spacing of pins vertically in pins per inch init_tabs it it Tabs initially every #1 spaces label_height lh lh Number of rows in each label label_width lw lw Numbre of columns in each label lines lines li Number of lines on a screen or a page lines_of_memory lm lm Lines of memory of > lines; 0 means varies magic_cookie_glitch xmc sg Number of blank characters left by smso or rmso max_attributes ma ma Maximum combined video attributes terminal can display max_colors colors Co Maximum number of colours on the screen max_micro_address maddr Yd Maximum value in micro_..._addresss max_micro_jump mjump Ye Maximum value in parm_..._micro max_pairs pairs pa Maximum number of colour- pairs on the screen maximum_windows wnum MW Maximum number of definable windows micro_col_size mcs Yf Character step size when in micro mode micro_line_size mls Yg Line step size when in micro mode no_color_video ncv NC Video attributes that can't be used with colours num_labels nlab Nl Number of labels on screen (start at 1) number_of_pins npins Yh Number of pins in print- head output_res_char orc Yi Horizontal resolution in units per character output_res_horz_inch orhi Yk Horizontal resolution in units per inch output_res_line orl Yj Vertical resolution in units per line output_res_vert_inch orvi Yl Vertical resolution in units per inch padding_baud_rate pb pb Lowest baud rate where padding needed print_rate cps Ym Print rate in characters per second virtual_terminal vt vt Virtual terminal number wide_char_size widcs Yn Character step size when in double-wide mode width_status_line wsl ws Number of columns in status line String Capabilities Long name Code TC Description acs_chars acsc ac Graphic charset pairs aAbBcC alt_scancode_esc scesa S8 Alternate escape for scancode emulation back_tab cbt bt Back tab bell bel bl Audible signal (bell) bit_image_carriage_return bicr Yv Move to beginning of same row bit_image_newline binel Zz Move to next row of the bit image bit_image_repeat birep Xy Repeat bit-image cell #1 #2 times carriage_return cr cr Carriage return change_char_pitch cpi ZA Change number of characters per inch change_line_pitch lpi ZB Change number of lines per inch change_res_horz chr ZC Change horizontal resolution change_res_vert cvr ZD Change vertical resolution change_scroll_region csr cs Change to lines #1 through #2 (VT100) char_padding rmp rP Like ip but when in replace mode char_set_names csnm Zy Returns a list of character set names clear_all_tabs tbc ct Clear all tab stops clear_margins mgc MC Clear all margins (top, bottom and sides) clear_screen clear cl Clear screen and home cursor clr_bol el1 cb Clear to beginning of line, inclusive clr_eol el ce Clear to end of line clr_eos ed cd Clear to end of display code_set_init csin ci Init sequence for multiple codesets color_names colornm Yw Give name for colour #1 column_address hpa ch Set horizontal position to absolute #1 command_character cmdch CC Terminal settable cmd character in prototype create_window cwin Define win #1 to go from #2,#3 to #4,#5 cursor_address cup cm Move to row #1, col #2 cursor_down cud1 do Down one line cursor_home home ho Home cursor (if no cup) cursor_invisible civis vi Make cursor invisible cursor_left cub1 le Move left one space cursor_mem_address mrcup CM Memory relative cursor addressing cursor_normal cnorm ve Make cursor appear normal (under vs/vi) cursor_right cuf1 nd Non-destructive space (cursor or carriage right) cursor_to_ll ll ll Last line, first column (if no cup) cursor_up cuu1 up Upline (cursor up) cursor_visible cvvis vs Make cursor very visible define_bit_image_region defbi Yx Define rectangular bit- image region define_char defc ZE Define a character in a character set delete_character dch1 dc Delete character delete_line dl1 dl Delete line device_type devt dv Indicate language/codeset support dial_phone dial DI Dial phone number #1 dis_status_line dsl ds Disable status line display_clock dclk DK Display time-of-day clock display_pc_char dispc S1 Display PC character down_half_time hd hd Half-line down (forward 1/2 linefeed) ena_acs enacs eA Enable alternate character set end_bit_image_region endbi Yy End a bit-image region enter_alt_charset_mode smacs as Start alternate character set enter_am_mode smam SA Turn on automatic margins enter_blink_mode blink mb Turn on blinking enter_bold_mode bold md Turn on bold (extra bright) mode enter_ca_mode smcup ti String to begin programs that use cup enter_delete_mode smdc dm Delete mode (enter) enter_dim_mode dim mh Turn on half-bright mode enter_doublewide_mode swidm ZF Enable double wide printing enter_draft_quality sdrfq ZG Set draft qualify print enter_horizontal_hl_mode ehhlm Xh Turn on horizontal highlight mode enter_insert_mode smir im Insert mode (enter) enter_italics_mode sitm ZH Enable italics enter_left_hl_mode elhlm Xl Turn on left highlight mode enter_leftward_mode slm ZI Enable leftward carriage motion enter_low_hl_mode elohlm Xo Turn on low highlight mode enter_micro_mode smicm ZJ Enable micro motion capabilities enter_near_quality_letter snlq ZK Set near-letter quality print enter_normal_quality snrmq ZL Set normal quality print enter_pc_charset_mode smpch S2 Enter PC character display mode enter_protected_mode prot mp Turn on protected mode enter_reverse_mode rev mr Turn on reverse video mode enter_right_hl_mode erhlm Xr Turn on right highlight mode enter_scancode_mode smsc S4 Enter PC scancode mode enter_secure_mode invis mk Turn on blank mode (characters invisible) enter_shadow_mode sshm ZM Enable shadow printing enter_standout_mode smso so Begin standout mode enter_subscript_mode ssubm ZN Enable subscript printing enter_superscript_mode ssupm ZO Enable superscript printing enter_top_hl_mode ethlm Xt Turn on top highlight mode enter_underline_mode smul us Start underscore mode enter_upward_mode sum ZP Enable upward carriage motion enter_vertical_hl_mode evhlm Xv Turn on verticle highlight mode enter_xon_mode smxon SX Turn on xon/xoff handshaking erase_chars ech ec Erase #1 characters exit_alt_charset_mode rmacs ae End alternate character set exit_am_mode rmam RA Turn off automatic margins exit_attribute_mode sgr0 me Turn off all attributes exit_ca_mode rmcup te String to end programs that use cup exit_delete_mode rmdc ed End delete mode exit_doublewide_mode rwidm ZQ Disable double wide printing exit_insert_mode rmir ei End insert mode exit_italics_mode ritm ZR Disable italics exit_leftward_mode rlm ZS Enable rightward (normal) carriage motion exit_micro_mode rmicm ZT Disable micro motion capabilities exit_pc_charset_mode rmpch S3 Disable PC character display mode exit_scancode_mode rmsc S5 Disable PC scancode mode exit_shadow_mode rshm ZU Disable shadow printing exit_standout_mode rmso se End standout mode exit_subscript_mode rsubm ZV Disable subscript printing exit_superscript_mode rsupm ZW Disable superscript printing exit_underline_mode rmul ue End underscore mode exit_upward_mode rum ZX Enable downward (normal) carriage motion exit_xon_mode rmxon RX Turn off xon/xoff handshaking fixed_pause pause PA Pause for 2-3 seconds flash_hook hook fh Flash the switch hook flash_screen flash vb Visible bell (may move cursor) form_feed ff ff Hardcopy terminal eject page from_status_line fsl fs Return from status line get_mouse getm Gm Curses should get button events goto_window wingo WG Go to window #1 hangup hup HU Hang-up phone init_1string is1 i1 Terminal or printer initialisation string init_2string is2 i2 Terminal or printer initialisation string init_3string is3 i3 Terminal or printer initialisation string init_file if if Name of initialisation file init_prog iprog iP Path name of program for initialisation initialize_color initc Ic Set colour #1 to RGB #2, #3, #4 initialize_pair initp Ip Set colour-pair #1 to fg #2, bg #3 insert_character ich1 ic Insert character insert_line il1 al Add new blank line insert_padding ip ip Insert pad after character inserted key_a1 ka1 K1 upper left of keypad key_a3 ka3 K3 upper right of keypad key_b2 kb2 K2 center of keypad key_backspace kbs kb set by backspace key key_beg kbeg @1 1 key_btab kcbt kB sent by back-tab key key_c1 kc1 K4 lower left of keypad key_c3 kc3 K5 lower right of keypad key_cancel kcan @2 2 key_catab ktbc ka sent by clear-all-tabs key key_clear kclr kC sent by clear-screen or erase key key_close kclo @3 3 key_command kcmd @4 4 key_copy kcpy @5 5 key_create kcrt @6 6 key_ctab kctab kt sent by clear-tab key key_dc kdch1 kD sent by delete-character key key_dl kdl1 kL sent by delete-line key key_down kcud1 kd sent by terminal down- arrow key key_eic krmir kM sent by rmir or smir in insert mode key_end kend @7 7 key_enter kent @8 8 key_eol kel kE sent by clear-to-end-of- line key key_eos ked kS sent by clear-to-end-of- screen key key_exit kext @9 9 key_f0 kf0 k0 sent by function key f0 key_f1 kf1 k1 sent by function key f1 key_f10 kf10 k; sent by function key f10 key_f11 kf11 F1 sent by function key f11 key_f12 kf12 F2 sent by function key f12 key_f13 kf13 F3 sent by function key f13 key_f14 kf14 F4 sent by function key f14 key_f15 kf15 F5 sent by function key f15 key_f16 kf16 F6 sent by function key f16 key_f17 kf17 F7 sent by function key f17 key_f18 kf18 F8 sent by function key f18 key_f19 kf19 F9 sent by function key f19 key_f2 kf2 k2 sent by function key f2 key_f20 kf20 FA sent by function key f20 key_f21 kf21 FB sent by function key f21 key_f22 kf22 FC sent by function key f22 key_f23 kf23 FD sent by function key f23 key_f24 kf24 FE sent by function key f24 key_f25 kf25 FF sent by function key f25 key_f26 kf26 FG sent by function key f26 key_f27 kf27 FH sent by function key f27 key_f28 kf28 FI sent by function key f28 key_f29 kf29 FJ sent by function key f29 key_f3 kf3 k3 sent by function key f3 key_f30 kf30 FK sent by function key f30 key_f31 kf31 FL sent by function key f31 key_f32 kf32 FM sent by function key f32 key_f33 kf33 FN sent by function key f33 key_f34 kf34 FO sent by function key f34 key_f35 kf35 FP sent by function key f35 key_f36 kf36 FQ sent by function key f36 key_f37 kf37 FR sent by function key f37 key_f38 kf38 FS sent by function key f38 key_f39 kf39 FT sent by function key f39 key_f4 kf4 k4 sent by function key f4 key_f40 kf40 FU sent by function key f40 key_f41 kf41 FV sent by function key f41 key_f42 kf42 FW sent by function key f42 key_f43 kf43 FX sent by function key f43 key_f44 kf44 FY sent by function key f44 key_f45 kf45 FZ sent by function key f45 key_f46 kf46 Fa sent by function key f46 key_f47 kf47 Fb sent by function key f47 key_f48 kf48 Fc sent by function key f48 key_f49 kf49 Fd sent by function key f49 key_f5 kf5 k5 sent by function key f5 key_f50 kf50 Fe sent by function key f50 key_f51 kf51 Ff sent by function key f51 key_f52 kf52 Fg sent by function key f52 key_f53 kf53 Fh sent by function key f53 key_f54 kf54 Fi sent by function key f54 key_f55 kf55 Fj sent by function key f55 key_f56 kf56 Fk sent by function key f56 key_f57 kf57 Fl sent by function key f57 key_f58 kf58 Fm sent by function key f58 key_f59 kf59 Fn sent by function key f59 key_f6 kf6 k6 sent by function key f6 key_f60 kf60 Fo sent by function key f60 key_f61 kf61 Fp sent by function key f61 key_f62 kf62 Fq sent by function key f62 key_f63 kf63 Fr sent by function key f63 key_f7 kf7 k7 sent by function key f7 key_f8 kf8 k8 sent by function key f8 key_f9 kf9 k9 sent by function key f9 key_find kfnd @0 0 key_help khlp %1 sent by help key key_home khome kh sent by home key key_ic kich1 kI sent by ins-char/enter ins-mode key key_il kil1 kA sent by insert-line key key_left kcub1 kl sent by terminal left- arrow key key_ll kll kH sent by home-down key key_mark kmrk %2 sent by mark key key_message kmsg %3 sent by message key key_mouse kmous Km 0631, Mouse event has occured key_move kmov %4 sent by move key key_next knxt %5 sent by next-object key key_npage knp kN sent by next-page key key_open kopn %6 sent by open key key_options kopt %7 sent by options key key_ppage kpp kP sent by previous-page key key_previous kprv %8 sent by previous-object key key_print kprt %9 sent by print or copy key key_redo krdo %0 sent by redo key key_reference kref &1 sent by ref(erence) key key_refresh krfr &2 sent by refresh key key_replace krpl &3 sent by replace key key_restart krst &4 sent by restart key key_resume kres &5 sent by resume key key_right kcuf1 kr sent by terminal right- arrow key key_save ksav &6 sent by save key key_sbeg kBEG &9 sent by shifted beginning key key_scancel kCAN &0 sent by shifted cancel key key_scommand kCMD *1 sent by shifted command key key_scopy kCPY *2 sent by shifted copy key key_screate kCRT *3 sent by shifted create key key_sdc kDC *4 sent by shifted delete- char key key_sdl kDL *5 sent by shifted delete- line key key_select kslt *6 sent by select key key_send kEND *7 sent by shifted end key key_seol kEOL *8 sent by shifted clear-line key key_sexit kEXT *9 sent by shited exit key key_sf kind kF sent by scroll- forward/down key key_sfind kFND *0 sent by shifted find key key_shelp kHLP #1 sent by shifted help key key_shome kHOM #2 sent by shifted home key key_sic kIC #3 sent by shifted input key key_sleft kLFT #4 sent by shifted left-arrow key key_smessage kMSG %a sent by shifted message key key_smove kMOV %b sent by shifted move key key_snext kNXT %c sent by shifted next key key_soptions kOPT %d sent by shifted options key key_sprevious kPRV %e sent by shifted prev key key_sprint kPRT %f sent by shifted print key key_sr kri kR sent by scroll- backwards/up key key_sredo kRDO %g sent by shifted redo key key_sreplace kRPL %h sent by shifted replace key key_sright kRIT %i sent by shifted right- arrow key key_srsume kRES %j sent by shifted resume key key_ssave kSAV !1 sent by shifted save key key_ssuspend kSPD !2 sent by shifted suspend key key_stab khts kT sent by set-tab key key_sundo kUND !3 sent by shifted undo key key_suspend kspd &7 sent by suspend key key_undo kund &8 sent by undo key key_up kcuu1 ku sent by terminal up-arrow key keypad_local rmkx ke Out of keypad-transmit" mode" keypad_xmit smkx ks Put terminal in keypad-transmit" mode" lab_f0 lf0 l0 Labels on function key f0 if not f0 lab_f1 lf1 l1 Labels on function key f1 if not f1 lab_f10 lf10 la Labels on function key f10 if not f10 lab_f2 lf2 l2 Labels on function key f2 if not f2 lab_f3 lf3 l3 Labels on function key f3 if not f3 lab_f4 lf4 l4 Labels on function key f4 if not f4 lab_f5 lf5 l5 Labels on function key f5 if not f5 lab_f6 lf6 l6 Labels on function key f6 if not f6 lab_f7 lf7 l7 Labels on function key f7 if not f7 lab_f8 lf8 l8 Labels on function key f8 if not f8 Labels on function key f9 if not f9" lab_f9 lf9 l9 label_format fln Lf Label format label_off rmln LF Turn off soft labels label_on smln LO Turn on soft labels meta_off rmm mo Turn off meta mode"" meta_on smm mm Turn on meta mode" (8th bit)" micro_column_address mhpa ZY Like column_address for micro adjustment micro_down mcud1 ZZ Like cursor_down for micro adjustment micro_left mcub1 Za Like cursor_left for micro adjustment micro_right mcuf1 Zb Like cursor_right for micro adjustment micro_row_address mvpa Zc Like row_address for micro adjustment micro_up mcuu1 Zd Like cursor_up for micro adjustment mouse_info minfo Mi Mouse status information newline nel nw Newline (behaves like cr followed by lf) order_of_pins porder Ze Matches software bits to print-head pins orig_colors oc oc Set all colour(-pair)s to original ones orig_pair op op Set default colour-pair to the original one pad_char pad pc Pad character (rather than NULL) parm_dch dch DC Delete #1 chars parm_delete_line dl DL Delete #1 lines parm_down_cursor cud DO Move down #1 lines parm_down_micro mcud Zf Like parm_down_cursor for micro adjustment parm_ich ich IC Insert #1 blank chars parm_index indn SF Scroll forward #1 lines parm_insert_line il AL Add #1 new blank lines parm_left_cursor cub LE Move cursor left #1 lines parm_left_micro mcub Zg Like parm_left_cursor for micro adjustment parm_right_cursor cuf RI Move right #1 spaces parm_right_micro mcuf Zh Like parm_right_cursor for micro adjustment parm_rindex rin SR Scroll backward #1 lines parm_up_cursor cuu UP Move cursor up #1 lines parm_up_micro mcuu Zi Like parm_up_cursor for micro adjustment pc_term_options pctrm S6 PC terminal options pkey_key pfkey pk Prog funct key #1 to type string #2 pkey_local pfloc pl Prog funct key #1 to execute string #2 pkey_norm pln pn Prog label #1 to show string #3 pkey_plab pfxl xl Prog key #1 to xmit string #2 and show string #3 pkey_xmit pfx px Prog funct key #1 to xmit string #2 print_screen mc0 ps Print contents of screen ptr_non mc5p pO Turn off printer for #1 bytes ptr_off mc4 pf Turn off the printer ptr_on mc5 po Turn on the printer pulse pulse PU Select pulse dialing quick_dial qdial QD Dial phone number #1, without progress detection remove_clock rmclk RC Remove time-of-day clock repeat_char rep rp Repeat char #1 #2 times req_for_input rfi RF Send next input char (for ptys) req_mouse_pos reqmp RQ Request mouse position report reset_1string rs1 r1 Reset terminal completely to sane modes reset_2string rs2 r2 Reset terminal completely to sane modes reset_3string rs3 r3 Reset terminal completely to sane modes reset_file rf rf Name of file containing reset string restore_cursor rc rc Restore cursor to position of last sc row_address vpa cv Set vertical position to absolute #1 save_cursor sc sc Save cursor position scancode_escape scesc S7 Escape for scancode emulation scroll_forward ind sf Scroll text up scroll_reverse ri sr Scroll text down select_char_set scs Zj Select character set set0_des_seq s0ds s0 Shift into codeset 0 (EUC set 0, ASCII) set1_des_seq s1ds s1 Shift into codeset 1 set2_des_seq s2ds s2 Shift into codeset 2 set3_des_seq s3ds s3 Shift into codeset 3 set_a_attributes sgr1 sA Define second set of video attributes #1-#6 set_a_background setab AB Set background colour to #1 using ANSI escape set_a_foreground setaf AF Set foreground colour to #1 using ANSI escape set_attributes sgr sa Define first set of video attributes #1-#9 set_background setb Sb Set background colour to #1 set_bottom_margin smgb Zk Set bottom margin at current line set_bottom_margin_parm smgbp Zl Set bottom margin at line #1 or #2 lines from bottom set_clock sclk SC Set clock to hours (#1), minutes (#2), seconds (#3) set_color_band setcolor Change ribbon to colour #1 set_color_pair scp sp Set current colour pair to #1 set_foreground setf Sf Set foreground colour to #1 set_left_margin smgl ML Set left margin at current column set_left_margin_parm smglp Zm Set left (right) margin at column #1 (#2) set_lr_margin smglr Sets both left and right margins set_page_length slines Yz Set page length to #1 lines set_pglen_inch slength sL Set page length to #1 hundredth of an inch set_right_margin smgr MR Set right margin at current column set_right_margin_parm smgrp Zn Set right margin at #1 set_tab hts st Set a tab in all rows, current column set_tb_margin smgtb MT Sets both top and bottom margins set_top_margin smgt Zo Set top margin at current line set_top_margin_parm smgtp Zp Set top (bottom) margin at line #1 (#2) set_window wind wi Current window is lines #1-#2 cols #3-#4 start_bit_image sbim Zq Start printing bit image graphics start_char_set_def scsd Zr Start definition of a character set stop_bit_image rbim Zs End printing bit image graphics stop_char_set_def rcsd Zt End definition of a character set subscript_characters subcs Zu List of subscript-able" characters" superscript_characters supcs Zv List of superscript-able" characters" tab ht ta Tab to next 8-space hardware tab stop these_cause_cr docr Zw Printing any of these characters causes cr to_status_line tsl ts Go to status line, col #1 tone tone TO Select tone touch dialing underline_char uc uc Underscore one char and move past it up_half_line hu hu Half-line up (reverse 1/2 linefeed) user0 u0 u0 User string 0 user1 u1 u1 User string 1 user2 u2 u2 User string 2 user3 u3 u3 User string 3 user4 u4 u4 User string 4 user5 u5 u5 User string 5 user6 u6 u6 User string 6 user7 u7 u7 User string 7 user8 u8 u8 User string 8 user9 u9 u9 User string 9 wait_tone wait WA Wait for dial tone xoff_character xoffc XF X-off character xon_character xonc XN X-on character zero_motion zerom Zx No motion for the subsequent character A Sample Entry vt100|dec vt100 (w/advanced video), am, xenl, msgr, mc5i, xon, cols#80, it#8, lines#24, vt#3, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, tbc=\E[3g, clear=\E[H\E[J$<50>, el1=\E[1K$<3>, el=\E[K$<3>, ed=\E[J$<50>, cup=\E[%i%p1%d;%p2%dH$<5>, cud1=^J, home=\E[H, cub1=^H, cuf1=\E[C$<2>, cuu1=\E[A$<2>, enacs=\E(B\E)0, smacs=^N, smam=\E[?7h, blink=\E[5m$<2>, bold=\E[1m$<2>, rev=\E[7m$<2>, smso=\E[7m$<2>, smul=\E[4m$<2>, rmacs=^O, rmam=\E[?7l, sgr0=\E[m017$<2>, rmso=\E[m$<2>, rmul=\E[m$<2>, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcud1=\EOB, kent=\EOM, kf0=\EOy, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, kf10=\EOx, kcub1=\EOD, kcuf1=\EOC, kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, cud=\E[%p1%dB, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rc=\E8, sc=\E7, ind=^J, ri=\EM$<5>, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t016%e017%;$<2>, hts=\EH, ht=^I, Fetching Compiled Descriptions This implementation uses hashed databases managed by cdb(5) instead of directories. To maintain compatability with other implementations, .cdb is appended to each file checked. If the environment variable TERMINFO is available, does not begin with (`/'), can be compiled with the above rules and whose name matches TERM then it is used. If the environment variable TERMCAP is available and does not begin with a slash (`/') then it will be translated into terminfo and compiled as above. If its name matches TERM then it is used. If the environment variable TERMINFO is available and begins with a slash (`/') then only this file is searched. Otherwise terminfo will first look for $HOME/.terminfo, followed by /usr/share/misc/terminfo unless TERMINFO_DIRS is available. If a matching description is not found then a small embedded database is searched, which currently holds descriptions for ansi, dumb, vt100, vt220, wsvt25, and xterm.
FILES
$HOME/.terminfo.cdb Database of terminal descriptions for per- sonal use. /usr/share/misc/terminfo File containing terminal descriptions. /usr/share/misc/terminfo.cdb Database of terminal descriptions.
SEE ALSO
infocmp(1), tic(1), tput(1), curses(3), cdb(5)
STANDARDS
terminfo complies with the X/Open Curses Issue 4, Version 2 (``XCURSES4.2'') standard. Extensions to the standard are noted in tic(1).
AUTHORS
Roy Marples <roy@NetBSD.org> NetBSD 6.1.5 January 25, 2013 NetBSD 6.1.5

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.