icp(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
ICP(4)                  NetBSD Kernel Interfaces Manual                 ICP(4)


NAME

     icp -- ICP-Vortex and Intel Storage RAID driver


SYNOPSIS

     icp* at pci? dev ? function ?
     ld* at icp? unit ?
     icpsp* at icp? unit ?
     scsibus* at icpsp?


DESCRIPTION

     The icp driver provides support for the newer (post 1997) ICP-Vortex GDT
     and Intel Storage RAID controllers.

     The ld driver provides access to logical devices (disk arrays) presented
     by the controller.  The icpsp driver provides direct access to other SCSI
     devices attached to the controller, such as tape or CD-ROM drives.


DIAGNOSTICS

     pci_mem_find: expected mem type 00000000, found 00000002
                   This message may be displayed during autoconfiguration if
                   the controller's memory is mapped below 1MB in physical
                   address space.  This can be disabled either through chang-
                   ing a setting in the controller's BIOS utility, or changing
                   the position of a jumper on the board.  See your con-
                   troller's documentation for more information.


SEE ALSO

     intro(4), ld(4), scsi(4)


HISTORY

     The icp driver first appeared in NetBSD 1.6, and was based on the FreeBSD
     and OpenBSD drivers of the same name.


BUGS

     ISA & EISA front-ends and a management interface are needed.

     Older PCI boards are not yet supported.

NetBSD 6.1.3                    April 20, 2002                    NetBSD 6.1.3