terminfo(5)
- NetBSD Manual Pages
TERMINFO(5) NetBSD File Formats Manual TERMINFO(5)
NAME
terminfo -- terminal capability definition
DESCRIPTION
terminfo describes the capabilities of terminals, used by programs such
as vi(1), rogue(6) and libraries such as curses(3). The terminfo source
described here needs to be compiled with tic(1) to be of any use.
Entries in terminfo consist of a number of comma separated fields. White
space after each comma is ignored. Embedded commas must be escaped by
using a backslash. Lines beginning with `#' in the first column are
treated as comments. Blank lines are ignored.
The header line must begin in column one and end with a comma. Inside
the header line are terminal name and aliases, separated by vertical
bars, the last one being the long description of the terminal.
Capability lines then follow, starting on column two and ending with a
comma. Each capability is listed by its name, followed by its value if
applicable. Booleans have no values, numeric values are prefixed by `#'
and strings are prefixed by `='. Numbers can range from 0 to 32767 and
string values can be up to 1000 characters long. This implementation
supports strings upto 32767 characters long, including the NUL termina-
tor.
Some escapes are available for strings - both \E and \e map to the ESC
character, ^X maps to a control-X for any appropriate X, and the
sequences \n, \r, \t, \b and \f map to linefeed, return, tab, backspace,
and formfeed respectively. Any character can be escaped in octal, such
as \072. If you need to encode a NUL character, it should be escaped as
\200.
A delay in milliseconds may appear anywhere in a string capability, pre-
fixed with a dollar sign and enclosed by angled brackets, such as $<5>.
String Parameters
String capabilities sometimes require parameters. Normally this just
involves replacing the parameter with a supplied variable; however, there
are cases where the variable needs to be manipulated or used in condi-
tional expressions. A stack is also provided for simple pop and push
operations.
The below % encodings have the following meanings:
%% outputs %
%[[:]flags][width[.precision]][doxXs]
flags are ``[-+#]''. Prefix with `:' to avoid interpreting
``%-'' as an operator.
%c pop a parameter and print the character representation of it.
%s pop a parameter and print the string representation of it.
%p[1-9] push the parameter [1-9].
%P[a-z] pop a parameter and push it to dynamic variable [a-z].
%g[a-z] push the dynamic variable [a-z].
%P[A-Z] pop a parameter and push it to static variable [a-z].
%g[A-Z] push the dynamic variable [A-Z].
Static variables persist over tparm() whereas dynamic variables
do not.
%'c' char constant c.
%{nn} integer constant nn.
%l push the string length of the previously popped parameter.
%+ %- %* %/ %m
arithmetic: pop two parameters and push the result.
%& %| %^
bit operations: pop two parameters and push the result.
%! %~ unary operations: pop two parameters and push the result.
%i add 1 to parameters 1 and 2.
%? expr %t then %e else %;
If expr equates to zero then control passes to the optional else
part.
Boolean Capabilities
Long name Code TC
auto_left_margin bw bw
auto_right_margin am am
back_color_erase bce ut
can_change ccc cc
ceol_standout_glitch xhp xs
col_addr_glitch xhpa YA
cpi_changes_res cpix YF
cr_cancels_micro_mode crxm YB
dest_tabs_magic_smso xt xt
eat_newline_glitch xenl xn
erase_overstrike eo eo
generic_type gn gn
hard_copy hc hc
hard_cursor chts HC
has_meta_key km km
has_print_wheel daisy YC
has_status_line hs hs
hue_light_saturation hls hl
insert_null_glitch in in
lpi_changes_yes lpix YG
memory_above da da
memory_below db db
move_insert_mode mir mi
move_standout_mode msgr ms
needs_xon_xoff nxon nx
no_esc_ctlc xsb xb
no_pad_char npc NP
non_dest_scroll_region ndscr ND
non_rev_rmcup nrrmc NR
over_strike os os
prtr_silent mc5i 5i
row_addr_glitch xvpa YD
semi_auto_right_margin sam YE
status_line_esc_ok eslok es
tilde_glitch hz hz
transparent_underline ul ul
xon_xoff xon xo
Numeric Capabilities
Long name Code TC
bit_image_entwining bitwin Yo
bit_image_type bitype Yp
buffer_capacity bufsz Ya
buttons btns BT
columns cols co
dot_horz_spacing spinh Yc
dot_vert_spacing spinv Yb
init_tabs it it
label_height lh lh
label_width lw lw
lines lines li
lines_of_memory lm lm
magic_cookie_glitch xmc sg
max_attributes ma ma
max_colors colors Co
max_micro_address maddr Yd
max_micro_jump mjump Ye
max_pairs pairs pa
maximum_windows wnum MW
micro_col_size mcs Yf
micro_line_size mls Yg
no_color_video ncv NC
num_labels nlab Nl
number_of_pins npins Yh
output_res_char orc Yi
output_res_horz_inch orhi Yk
output_res_line orl Yj
output_res_vert_inch orvi Yl
padding_baud_rate pb pb
print_rate cps Ym
virtual_terminal vt vt
wide_char_size widcs Yn
width_status_line wsl ws
String Capabilities
Long name Code TC
acs_chars acsc ac
alt_scancode_esc scesa S8
back_tab cbt bt
bell bel bl
bit_image_carriage_return bicr Yv
bit_image_newline binel Zz
bit_image_repeat birep Xy
carriage_return cr cr
change_char_pitch cpi ZA
change_line_pitch lpi ZB
change_res_horz chr ZC
change_res_vert cvr ZD
change_scroll_region csr cs
char_padding rmp rP
char_set_names csnm Zy
clear_all_tabs tbc ct
clear_margins mgc MC
clear_screen clear cl
clr_bol el1 cb
clr_eol el ce
clr_eos ed cd
code_set_init csin ci
color_names colornm Yw
column_address hpa ch
command_character cmdch CC
create_window cwin
cursor_address cup cm
cursor_down cud1 do
cursor_home home ho
cursor_invisible civis vi
cursor_left cub1 le
cursor_mem_address mrcup CM
cursor_normal cnorm ve
cursor_right cuf1 nd
cursor_to_ll ll ll
cursor_up cuu1 up
cursor_visible cvvis vs
define_bit_image_region defbi Yx
define_char defc ZE
delete_character dch1 dc
delete_line dl1 dl
device_type devt dv
dial_phone dial DI
dis_status_line dsl ds
display_clock dclk DK
display_pc_char dispc S1
down_half_time hd hd
ena_acs enacs eA
end_bit_image_region endbi Yy
enter_alt_charset_mode smacs as
enter_am_mode smam SA
enter_blink_mode blink mb
enter_bold_mode bold md
enter_ca_mode smcup ti
enter_delete_mode smdc dm
enter_dim_mode dim mh
enter_doublewide_mode swidm ZF
enter_draft_quality sdrfq ZG
enter_horizontal_hl_mode ehhlm Xh
enter_insert_mode smir im
enter_italics_mode sitm ZH
enter_left_hl_mode elhlm Xl
enter_leftward_mode slm ZI
enter_low_hl_mode elohlm Xo
enter_micro_mode smicm ZJ
enter_near_quality_letter snlq ZK
enter_normal_quality snrmq ZL
enter_pc_charset_mode smpch S2
enter_protected_mode prot mp
enter_reverse_mode rev mr
enter_right_hl_mode erhlm Xr
enter_scancode_mode smsc S4
enter_secure_mode invis mk
enter_shadow_mode sshm ZM
enter_standout_mode smso so
enter_subscript_mode ssubm ZN
enter_superscript_mode ssupm ZO
enter_top_hl_mode ethlm Xt
enter_underline_mode smul us
enter_upward_mode sum ZP
enter_vertical_hl_mode evhlm Xv
enter_xon_mode smxon SX
erase_chars ech ec
exit_alt_charset_mode rmacs ae
exit_am_mode rmam RA
exit_attribute_mode sgr0 me
exit_ca_mode rmcup te
exit_delete_mode rmdc ed
exit_doublewide_mode rwidm ZQ
exit_insert_mode rmir ei
exit_italics_mode ritm ZR
exit_leftward_mode rlm ZS
exit_micro_mode rmicm ZT
exit_pc_charset_mode rmpch S3
exit_scancode_mode rmsc S5
exit_shadow_mode rshm ZU
exit_standout_mode rmso se
exit_subscript_mode rsubm ZV
exit_superscript_mode rsupm ZW
exit_underline_mode rmul ue
exit_upward_mode rum ZX
exit_xon_mode rmxon RX
fixed_pause pause PA
flash_hook hook fh
flash_screen flash vb
form_feed ff ff
from_status_line fsl fs
get_mouse getm Gm
goto_window wingo WG
hangup hup HU
init_1string is1 i1
init_2string is2 i2
init_3string is3 i3
init_file if if
init_prog iprog iP
initialize_color initc Ic
initialize_pair initp Ip
insert_character ich1 ic
insert_line il1 al
insert_padding ip ip
key_a1 ka1 K1
key_a3 ka3 K3
key_b2 kb2 K2
key_backspace kbs kb
key_beg kbeg @1
key_btab kcbt kB
key_c1 kc1 K4
key_c3 kc3 K5
key_cancel kcan @2
key_catab ktbc ka
key_clear kclr kC
key_close kclo @3
key_command kcmd @4
key_copy kcpy @5
key_create kcrt @6
key_ctab kctab kt
key_dc kdch1 kD
key_dl kdl1 kL
key_down kcud1 kd
key_eic krmir kM
key_end kend @7
key_enter kent @8
key_eol kel kE
key_eos ked kS
key_exit kext @9
key_f0 kf0 k0
key_f1 kf1 k1
key_f10 kf10 k;
key_f11 kf11 F1
key_f12 kf12 F2
key_f13 kf13 F3
key_f14 kf14 F4
key_f15 kf15 F5
key_f16 kf16 F6
key_f17 kf17 F7
key_f18 kf18 F8
key_f19 kf19 F9
key_f2 kf2 k2
key_f20 kf20 FA
key_f21 kf21 FB
key_f22 kf22 FC
key_f23 kf23 FD
key_f24 kf24 FE
key_f25 kf25 FF
key_f26 kf26 FG
key_f27 kf27 FH
key_f28 kf28 FI
key_f29 kf29 FJ
key_f3 kf3 k3
key_f30 kf30 FK
key_f31 kf31 FL
key_f32 kf32 FM
key_f33 kf33 FN
key_f34 kf34 FO
key_f35 kf35 FP
key_f36 kf36 FQ
key_f37 kf37 FR
key_f38 kf38 FS
key_f39 kf39 FT
key_f4 kf4 k4
key_f40 kf40 FU
key_f41 kf41 FV
key_f42 kf42 FW
key_f43 kf43 FX
key_f44 kf44 FY
key_f45 kf45 FZ
key_f46 kf46 Fa
key_f47 kf47 Fb
key_f48 kf48 Fc
key_f49 kf49 Fd
key_f5 kf5 k5
key_f50 kf50 Fe
key_f51 kf51 Ff
key_f52 kf52 Fg
key_f53 kf53 Fh
key_f54 kf54 Fi
key_f55 kf55 Fj
key_f56 kf56 Fk
key_f57 kf57 Fl
key_f58 kf58 Fm
key_f59 kf59 Fn
key_f6 kf6 k6
key_f60 kf60 Fo
key_f61 kf61 Fp
key_f62 kf62 Fq
key_f63 kf63 Fr
key_f7 kf7 k7
key_f8 kf8 k8
key_f9 kf9 k9
key_find kfnd @0
key_help khlp %1
key_home khome kh
key_ic kich1 kI
key_il kil1 kA
key_left kcub1 kl
key_ll kll kH
key_mark kmrk %2
key_message kmsg %3
key_mouse kmous Km
key_move kmov %4
key_next knxt %5
key_npage knp kN
key_open kopn %6
key_options kopt %7
key_ppage kpp kP
key_previous kprv %8
key_print kprt %9
key_redo krdo %0
key_reference kref &1
key_refresh krfr &2
key_replace krpl &3
key_restart krst &4
key_resume kres &5
key_right kcuf1 kr
key_save ksav &6
key_sbeg kBEG &9
key_scancel kCAN &0
key_scommand kCMD *1
key_scopy kCPY *2
key_screate kCRT *3
key_sdc kDC *4
key_sdl kDL *5
key_select kslt *6
key_send kEND *7
key_seol kEOL *8
key_sexit kEXT *9
key_sf kind kF
key_sfind kFND *0
key_shelp kHLP #1
key_shome kHOM #2
key_sic kIC #3
key_sleft kLFT #4
key_smessage kMSG %a
key_smove kMOV %b
key_snext kNXT %c
key_soptions kOPT %d
key_sprevious kPRV %e
key_sprint kPRT %f
key_sr kri kR
key_sredo kRDO %g
key_sreplace kRPL %h
key_sright kRIT %i
key_srsume kRES %j
key_ssave kSAV !1
key_ssuspend kSPD !2
key_stab khts kT
key_sundo kUND !3
key_suspend kspd &7
key_undo kund &8
key_up kcuu1 ku
keypad_local rmkx ke
keypad_xmit smkx ks
lab_f0 lf0 l0
lab_f1 lf1 l1
lab_f10 lf10 la
lab_f2 lf2 l2
lab_f3 lf3 l3
lab_f4 lf4 l4
lab_f5 lf5 l5
lab_f6 lf6 l6
lab_f7 lf7 l7
lab_f8 lf8 l8
lab_f9 lf9 l9
label_format fln Lf
label_off rmln LF
label_on smln LO
meta_off rmm mo
meta_on smm mm
micro_column_address mhpa ZY
micro_down mcud1 ZZ
micro_left mcub1 Za
micro_right mcuf1 Zb
micro_row_address mvpa Zc
micro_up mcuu1 Zd
mouse_info minfo Mi
newline nel nw
order_of_pins porder Ze
orig_colors oc oc
orig_pair op op
pad_char pad pc
parm_dch dch DC
parm_delete_line dl DL
parm_down_cursor cud DO
parm_down_micro mcud Zf
parm_ich ich IC
parm_index indn SF
parm_insert_line il AL
parm_left_cursor cub LE
parm_left_micro mcub Zg
parm_right_cursor cuf RI
parm_right_micro mcuf Zh
parm_rindex rin SR
parm_up_cursor cuu UP
parm_up_micro mcuu Zi
pc_term_options pctrm S6
pkey_key pfkey pk
pkey_local pfloc pl
pkey_norm pln pn
pkey_plab pfxl xl
pkey_xmit pfx px
print_screen mc0 ps
ptr_non mc5p pO
ptr_off mc4 pf
ptr_on mc5 po
pulse pulse PU
quick_dial qdial QD
remove_clock rmclk RC
repeat_char rep rp
req_for_input rfi RF
req_mouse_pos reqmp RQ
reset_1string rs1 r1
reset_2string rs2 r2
reset_3string rs3 r3
reset_file rf rf
restore_cursor rc rc
row_address vpa cv
save_cursor sc sc
scancode_escape scesc S7
scroll_forward ind sf
scroll_reverse ri sr
select_char_set scs Zj
set0_des_seq s0ds s0
set1_des_seq s1ds s1
set2_des_seq s2ds s2
set3_des_seq s3ds s3
set_a_attributes sgr1 sA
set_a_background setab AB
set_a_foreground setaf AF
set_attributes sgr sa
set_background setb Sb
set_bottom_margin smgb Zk
set_bottom_margin_parm smgbp Zl
set_clock sclk SC
set_color_band setcolor
set_color_pair scp sp
set_foreground setf Sf
set_left_margin smgl ML
set_left_margin_parm smglp Zm
set_lr_margin smglr
set_page_length slines Yz
set_pglen_inch slength sL
set_right_margin smgr MR
set_right_margin_parm smgrp Zn
set_tab hts st
set_tb_margin smgtb MT
set_top_margin smgt Zo
set_top_margin_parm smgtp Zp
set_window wind wi
start_bit_image sbim Zq
start_char_set_def scsd Zr
stop_bit_image rbim Zs
stop_char_set_def rcsd Zt
subscript_characters subcs Zu
superscript_characters supcs Zv
tab ht ta
these_cause_cr docr Zw
to_status_line tsl ts
tone tone TO
underline_char uc uc
up_half_line hu hu
user0 u0 u0
user1 u1 u1
user2 u2 u2
user3 u3 u3
user4 u4 u4
user5 u5 u5
user6 u6 u6
user7 u7 u7
user8 u8 u8
user9 u9 u9
wait_tone wait WA
xoff_character xoffc XF
xon_character xonc XN
zero_motion zerom Zx
A Sample Entry
vt100|dec vt100 (w/advanced video),
am, xenl, msgr, mc5i, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G,
cr=^M, csr=\E[%i%p1%d;%p2%dr, tbc=\E[3g, clear=\E[H\E[J$<50>,
el1=\E[1K$<3>, el=\E[K$<3>, ed=\E[J$<50>,
cup=\E[%i%p1%d;%p2%dH$<5>, cud1=^J, home=\E[H, cub1=^H,
cuf1=\E[C$<2>, cuu1=\E[A$<2>, enacs=\E(B\E)0, smacs=^N,
smam=\E[?7h, blink=\E[5m$<2>, bold=\E[1m$<2>, rev=\E[7m$<2>,
smso=\E[7m$<2>, smul=\E[4m$<2>, rmacs=^O, rmam=\E[?7l,
sgr0=\E[m017$<2>, rmso=\E[m$<2>, rmul=\E[m$<2>, ka1=\EOq,
ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcud1=\EOB,
kent=\EOM, kf0=\EOy, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, kf10=\EOx,
kcub1=\EOD, kcuf1=\EOC, kcuu1=\EOA, rmkx=\E[?1l\E>,
smkx=\E[?1h\E=, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
cud=\E[%p1%dB, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, rc=\E8, sc=\E7,
ind=^J, ri=\EM$<5>,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t016%e017%;$<2>,
hts=\EH, ht=^I,
Fetching Compiled Descriptions
This implementation uses hashed databases managed by cdb(5) instead of
directories. To maintain compatability with other implementations, .cdb
is appended to each file checked.
If the environment variable TERMINFO is available, does not begin with
(`/'), can be compiled with the above rules and whose name matches TERM
then it is used.
If the environment variable TERMCAP is available and does not begin with
a slash (`/') then it will be translated into terminfo and compiled as
above. If its name matches TERM then it is used.
If the environment variable TERMINFO is available and begins with a slash
(`/') then only this file is searched. Otherwise terminfo will first
look for $HOME/.terminfo, followed by /usr/share/misc/terminfo unless
TERMINFO_DIRS is available. If a matching description is not found then
a small embedded database is searched, which currently holds descriptions
for ansi, dumb, vt100, vt220, wsvt25, and xterm.
FILES
$HOME/.terminfo.cdb Database of terminal descriptions for per-
sonal use.
/usr/share/misc/terminfo File containing terminal descriptions.
/usr/share/misc/terminfo.cdb Database of terminal descriptions.
SEE ALSO
infocmp(1), tic(1), tput(1), curses(3), cdb(5)
STANDARDS
terminfo complies with the X/Open Curses Issue 4, Version 2
(``XCURSES4.2'') standard.
Extensions to the standard are noted in tic(1).
AUTHORS
Roy Marples <roy@NetBSD.org>
NetBSD 6.0 June 6, 2012 NetBSD 6.0
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.