- NetBSD Manual Pages
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
pcap-savefile - libpcap savefile format
NOTE: applications and libraries should, if possible, use libpcap to
read savefiles, rather than having their own code to read savefiles.
If, in the future, a new file format is supported by libpcap, applica-
tions and libraries using libpcap to read savefiles will be able to
read the new format of savefiles, but applications and libraries using
their own code to read savefiles will have to be changed to support the
new file format.
``Savefiles'' read and written by libpcap and applications using libp-
cap start with a per-file header. The format of the per-file header
box; c s c | c c s. Magic number _ Major version Minor version
_ Time zone offset _ Time stamp accuracy _ Snapshot length _
Link-layer header type
All fields in the per-file header are in the byte order of the host
writing the file. The first field in the per-file header is a 4-byte
magic number, with the value 0xa1b2c3d4. The magic number, when read
by a host with the same byte order as the host that wrote the file,
will have the value 0xa1b2c3d4, and, when read by a host with the oppo-
site byte order as the host that wrote the file, will have the value
0xd4c3b2a1. That allows software reading the file to determine whether
the byte order of the host that wrote the file is the same as the byte
order of the host on which the file is being read, and thus whether the
values in the per-file and per-packet headers need to be byte-swapped.
Following this are:
A 2-byte file format major version number; the current version
number is 2.
A 2-byte file format minor version number; the current version
number is 4.
A 4-byte time zone offset; this is always 0.
A 4-byte number giving the accuracy of time stamps in the file;
this is always 0.
A 4-byte number giving the "snapshot length" of the capture;
packets longer than the snapshot length are truncated to the
snapshot length, so that, if the snapshot length is N, only the
first N bytes of a packet longer than N bytes will be saved in
a 4-byte number giving the link-layer header type for packets in
the capture; see pcap-linktype(7) for the LINKTYPE_ values that
can appear in this field.
Following the per-file header are zero or more packets; each packet
begins with a per-packet header, which is immediately followed by the
raw packet data. The format of the per-packet header is:
box; c. Time stamp, seconds value _ Time stamp, microseconds
value _ Length of captured packet data _ Un-truncated length of
the packet data
All fields in the per-packet header are in the byte order of the host
writing the file. The per-packet header begins with a time stamp giv-
ing the approximate time the packet was captured; the time stamp con-
sists of a 4-byte value, giving the time in seconds since January 1,
1970, 00:00:00 UTC, followed by a 4-byte value, giving the time in
microseconds since that second. Following that are a 4-byte value giv-
ing the number of bytes of captured data that follow the per-packet
header and a 4-byte value giving the number of bytes that would have
been present had the packet not been truncated by the snapshot length.
The two lengths will be equal if the number of bytes of packet data are
less than or equal to the snapshot length.
21 October 2008 PCAP-SAVEFILE(5)