- NetBSD Manual Pages
STGE(4) NetBSD Kernel Interfaces Manual STGE(4)
Powered by man-cgi (2021-06-01).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.
stge -- Sundance/Tamarack TC9021 Gigabit Ethernet driver
stge* at pci? dev ? function ?
Configuration of PHYs or Ten-bit interfaces may also be necessary. See
The stge device driver supports the Sundance/Tamarack TC9021 Gigabit Eth-
The Sundance/Tamarack TC9021 is found on the D-Link DGE-550T, and the
Antares Microsystems Gigabit Ethernet board. It uses an external PHY or
an external 10-bit interface.
The TC9021 supports IPv4/TCP/UDP checksumming in hardware. The stge
driver supports this feature of the chip. See ifconfig(8) for informa-
tion on how to enable this feature.
arp(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)
The stge driver first appeared in NetBSD 1.6.
The stge driver was written by Jason R. Thorpe <thorpej@NetBSD.org>.
The stge driver does not support the VLAN tag insertion/removal feature
of the TC9021 chip. This is primarily because the TC9021's VLAN do not
have a useful programming interface.
The stge driver does not yet support jumbo Ethernet frames.
The stge driver does not yet function properly with 1000BASE-T fitted
boards. Currently, only 1000BASE-SX boards work.
NetBSD 5.1 July 24, 2001 NetBSD 5.1