pow(4) - NetBSD Manual Pages

POW(4)               NetBSD/x68k Kernel Interfaces Manual               POW(4)


NAME
pow -- X68k power switch device
DESCRIPTION
Files /dev/pow and /dev/pow1 are devices used to access the x68k power switch / bootstrap information and the RTC alarm timer. The following operations are allowed using ioctl(2) system call: POWIOGPOWERINFO Getting power switch status POWIOGALARMINFO Getting RTC alarm timer status POWIOSALARMINFO Setting RTC alarm timer POWIOSSIGNAL Setting signal number which is sent at changing the power status
GETTING POWER SWITCH STATUS
<sys/ioctl.h> <machine/powioctl.h> ioctl (fd, POWIOCGPOWERINFO, &powerinfo); struct x68k_powerinfo powerinfo; Returns the power switch status etc. in the following structure. struct x68k_powerinfo { int pow_switch_boottime; int pow_switch_current; time_t pow_boottime; unsigned int pow_bootcount; time_t pow_usedtotal; }; Each member means: pow_switch_boottime: The power switch status at the system start time. The status is known by applying logical and (&) with: POW_ALARMSW True if the system started by the RTC alarm timer POW_EXTERNALSW True if the EXPWON signal of the I/O slot is on POW_FRONTSW True if the front power switch is on EXPWON-related information is not tested. pow_switch_current: Current power switch status. See above. pow_boottime: The time when NetBSD started. pow_bootcount, pow_usedtotal: Host's boot information from the system memory switch. Total usage in count (pow_bootcount) and second (pow_usedtotal).
ACCESSING RTC ALARM TIMER
<sys/ioctl.h> <machine/powioctl.h> ioctl (fd, POWIOCGALARMINFO, &alarminfo); struct x68k_alarminfo alarminfo; Returns x68k's alarm timer information in the following structure. struct x68k_alarminfo { int al_enable; unsigned int al_ontime; int al_dowhat; time_t al_offtime; }; Each of the members means: al_enable: True if the alarm timer is enable. al_ontime: Internal expression of the alarm timer. See `C Compiler PRO-68K Programmers' Manual' Chapter 3 Section ALARMSET. al_dowhat: What to do when started by the alarm timer. See `Programmers' manual'. al_offtime: Display the time in seconds since the alarm is activated until the power is turned off (though the resolution is resolved to minutes). Be cautious when using IOCS and the like as these require minute time units. 0 indicates an infinity. ioctl (fd, POWIOCSALARMINFO, &alarminfo); struct x68k_alarminfo alarminfo; Sets the alarm timer according to the argument alarminfo (see above).
SIGNAL
<sys/ioctl.h> <machine/powioctl.h> ioctl (fd, POWIOCSSIGNAL, &signum); int signum; Signal signum is sent when the state of the power switch (front or exter- nal) changes. It becomes invalid when close(2) is called. Note that this function is not provided with /dev/pow1.
SEE ALSO
ioctl(2), poffd(8), rtcalarm(8) `C Compiler PRO-68K Programmers' Manual', Chapter 3 IOCS Calls, Section ALARMSET, Sharp
AUTHORS
Minoura Makoto <minoura@flab.fujitsu.co.jp>.
SPECIAL THANKS
Liam Hahne Minn <hahne@sail.t.u-tokyo.ac.jp>.
BUGS
The file /dev/pow can only be opened by one process at a time. NetBSD 5.1.2 July 2, 1995 NetBSD 5.1.2

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.