dosboot(8) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
DOSBOOT(8)            NetBSD/i386 System Manager's Manual           DOSBOOT(8)


NAME

     dosboot -- boot NetBSD/i386 from DOS


SYNOPSIS

     dosboot [-u] [-c command] [-i] [path [-adqsv]]


DESCRIPTION

     dosboot is an MS-DOS program.  It is a boot loader for NetBSD/i386
     designed to permit NetBSD to be booted directly from MS-DOS.  By default,
     it boots a file with name NETBSD in the current MS-DOS directory.
     dosboot shares common code with the standard boot loader, boot(8).

     The recognized options are:

         -u    Boot from a UFS filesystem instead of an MS-DOS filesystem.

         -c    Execute command (see below).

         -i    Enter interactive mode.  dosboot will present a prompt, allow-
               ing input of commands (see below).

         path  Specifies the kernel file. In MS-DOS mode (default) a normal
               MS-DOS filename (with or without drive specification) is
               accepted.  In UFS mode (after -u or after a mode ufs command),
               a path in a NetBSD filesystem is expected. By default, the file
               is looked up in partition 'a' of the first harddisk. Another
               device or partition can be specified by prepending a block
               device name in terms of NetBSD, followed by a colon (see
               boot(8) and examples).

         -adqsv
               Flags passed to the kernel, see boot(8).

     The commands accepted after the -c flag or in interactive mode are:

         boot [device:][filename] [-1234abcdmqsvxz]
               Boot NetBSD.  See boot in boot(8) for full details.

         dev [device]
               Set the default device and partition for subsequent filesystem
               operations.  Without an operand, print the current setting.
               This setting doesn't apply to MS-DOS mode.

         help  Print an overview about commands and arguments.

         ls [path]
               Print a directory listing of path, containing inode number,
               filename and file type. This command works in UFS mode only.
               path can contain a device specification.

         mode fstype
               Switch filesystem type; fstype should be one of dos or ufs.

         quit  Leave the dosboot program and exit to MS-DOS.

     dosboot is also installed in the release(7) hierarchy, under
     installation/misc/dosboot.com.


FILES

     /usr/mdec/dosboot.com


EXAMPLES

     To boot a NetBSD kernel located on MS-DOS drive D, one would issue:

           dosboot D:\NODOS\NETBSD

     To boot from a NetBSD floppy into single user mode, type e.g.:

           dosboot -u fd0a:netbsd -s


SEE ALSO

     release(7), boot(8), w95boot(8)


HISTORY

     The NetBSD/i386 dosboot command first appeared in NetBSD 1.3.


BUGS

     dosboot assumes that the processor is in real mode at startup. It does
     not work well in the presence of MS-DOS extenders and memory managers.

     dosboot does not run directly under Windows 95.  See w95boot(8) for a
     method of starting NetBSD from Windows 95 using dosboot.

     In UFS mode, files can only be loaded from devices known to the BIOS.
     The device names do not necessarily comply with the names later used by
     the booted NetBSD kernel.

     In MS-DOS mode, no useful boot device specification is passed to NetBSD.
     It is necessary to have the root device hardwired into the kernel config-
     uration or to enter it manually.

NetBSD 5.0.1                   October 13, 2008                   NetBSD 5.0.1