CONFIG.SAMPLES(5) NetBSD File Formats Manual CONFIG.SAMPLES(5)
NAME
config.samples -- kernel configuration file syntax examples
DESCRIPTION
Devices, drivers and instances For a given device, at most one driver will attach. In order for a driver to attach, the kernel configuration file must include a compatible instance of the driver for the location of the device. The following lines from the GENERIC kernel configuration file of NetBSD/i386 are exam- ples of instances of drivers: pchb* at pci? dev ? function ? # PCI-Host bridges pcib* at pci? dev ? function ? # PCI-ISA bridges ppb* at pci? dev ? function ? # PCI-PCI bridges siop* at pci? dev ? function ? # Symbios 53c8xx SCSI esiop* at pci? dev ? function ? # Symbios 53c875 SCSI and newer ix0 at isa? port 0x300 irq 10 # EtherExpress/16 The first three instances allow three different drivers to attach to all the matching devices found on any PCI bus. This is the most generic case. The next two lines allow two distinct drivers to attach to any matching device found on any PCI bus, but those two drivers are special because they both support some of the same devices. Each of the driver has a matching function that returns their score for the device that is being considered. autoconf(9) decides at run-time which driver will attach. Of course, it is deterministic so if the user wants to change the driver that attaches to the device, the instance of the other driver will have to be removed, e.g. by commenting it out. The last line configures an instance of an ISA device. Unlike the PCI bus, the ISA bus cannot discover the devices that are present on the bus. The driver has to try accessing the device in order to discover it. That implies locators must be specified to some extent: a driver would usually need the base address of the device, some need the IRQ line that the device is configured to use, thoug some others would just try a set of known values, at the risk of badly interacting with other devices on the bus. Hard-wiring kernel configuration This technique consists in specifying exactly the location of the devices on a given system. In the general case it has very little use, because it does not change the size of the kernel, and it will prevent it from finding devices in case the hardware changes, even slightly. Let's consider the following excerpt of dmesg(8) output: auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio The auich(4) driver (which controls Intel's AC-97 audio chips) attached there because of the following instance of GENERIC: auich* at pci? dev ? function ? Hard-wiring that instance means re-writing it to the following: auich0 at pci0 dev 31 function 5 and that way, auich0 will attach to that specific location, or will not attach. Removing options and drivers When two kernel configurations differ by a very small number of changes, it is easier to manage them by having one include the other, and add or remove the differences. Removing options and drivers is also useful in the situation of a user who wants to follow the development of NetBSD: drivers and options get added to the configuration files found in the source tree, such as GENERIC, so one can include it and remove all options and drivers that are not relevant to the considered system. Additions to GENERIC will then automatically be followed and used in case they are relevant. While negating an options (with no options) is unambiguous, it is not as clear for devices instances. The no instance definition statements of config(1) syntax only apply on the current state of the configuration file, not on the resulting kernel binary. autoconf(9) has no knowledge of instance negation, thus it is currently impossible to express the following in a kernel configuration file: ``I want support for ath(4) attaching at pci(4), but I do not want any instance of ath(4) attaching at pci3.'' For a real-world use of no device at instance consider the following, taken from NetBSD/i386: include "arch/i386/conf/GENERIC" acpi0 at mainbus? com* at acpi? [... more instances of legacy devices attaching at acpi? ...] no device at isa0 One could actually live without the isa0 instance, as all the legacy devices are attached at acpi0. But unfortunately, dependencies on the isa attribute are not well registered all through the source tree, so an instance of the isa(4) driver is required to compile a kernel. So while: no isa* is what is intended, the isa(4) instance itself must be kept, and that is precisely the difference made by: no device at isa0 Interface attributes Interface attributes are a subtility of config(1) and autoconf(9), which often confuses users and utilities that parse dmesg(8) output to manipu- late kernel configuration files. What they are is best shown by the fol- lowing example. The dmesg(8) output look like this: auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50) audio0 at auvia0: full duplex, mmap, independent while the kernel configuration look like this: auvia* at pci? dev ? function ? audio* at audiobus? It is not obvious from the kernel configuration file that an audio(4) device can attach at an auvia(4) device. audiobus is an interface attribute, exposed by auvia. Of course, it is possible to specify audio* at auvia? in the kernel configuration file, but then one instance per audio con- troler would be needed. Interface attributes reflect the fact there is a standard way to attach a device to its parent, no matter what the latter is precisely. It also means lower maintainance of the kernel configura- tion files because drivers for audio controlers are added more easily. Most attachments are done through interface attributes, although only a few of them are specified that way in the configuration files found in the tree. Another example of such an attribute is ata: viaide0 at pci0 dev 17 function 1 atabus0 at viaide0 channel 0 viaide* at pci? dev ? function ? atabus* at ata?
SEE ALSO
config(1), options(4), config(5), dmesg(8) NetBSD 4.0 June 4, 2006 NetBSD 4.0
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.