XFree86(1)
- NetBSD Manual Pages
XFree86(1) XFree86(1)
NAME
XFree86 - X11R6 X server
SYNOPSIS
XFree86 [:display] [option ...]
DESCRIPTION
XFree86 is a full featured X server that was originally designed for
UNIX and UNIX-like operating systems running on Intel x86 hardware. It
now runs on a wider range of hardware and OS platforms.
This work was originally derived from X386 1.2 by Thomas Roell which
was contributed to X11R5 by Snitily Graphics Consulting Service. The
XFree86 server architecture was redesigned for the 4.0 release, and it
includes among many other things a loadable module system derived from
code donated by Metro Link, Inc. The current XFree86 release is com-
patible with X11R6.6.
PLATFORMS
XFree86 operates under a wide range of operating systems and hardware
platforms. The Intel x86 (IA32) architecture is the most widely sup-
ported hardware platform. Other hardware platforms include Compaq
Alpha, Intel IA64, SPARC and PowerPC. The most widely supported oper-
ating systems are the free/OpenSource UNIX-like systems such as Linux,
FreeBSD, NetBSD and OpenBSD. Commercial UNIX operating systems such as
Solaris (x86) and UnixWare are also supported. Other supported operat-
ing systems include LynxOS, and GNU Hurd. Darwin and Mac OS X are sup-
ported with the XDarwin(1) X server. Win32/Cygwin is supported with
the XWin X server.
NETWORK CONNECTIONS
XFree86 supports connections made using the following reliable byte-
streams:
Local
On most platforms, the "Local" connection type is a UNIX-domain
socket. On some System V platforms, the "local" connection types
also include STREAMS pipes, named pipes, and some other mechanisms.
TCPIP
XFree86 listens on port 6000+n, where n is the display number.
This connection type can be disabled with the -nolisten option (see
the Xserver(1) man page for details).
ENVIRONMENT VARIABLES
For operating systems that support local connections other than Unix
Domain sockets (SVR3 and SVR4), there is a compiled-in list specifying
the order in which local connections should be attempted. This list
can be overridden by the XLOCAL environment variable described below.
If the display name indicates a best-choice connection should be made
(e.g. :0.0), each connection mechanism is tried until a connection
succeeds or no more mechanisms are available. Note: for these OSs, the
Unix Domain socket connection is treated differently from the other
local connection types. To use it the connection must be made to
unix:0.0.
The XLOCAL environment variable should contain a list of one more more
of the following:
NAMED
PTS
SCO
ISC
which represent SVR4 Named Streams pipe, Old-style USL Streams pipe,
SCO XSight Streams pipe, and ISC Streams pipe, respectively. You can
select a single mechanism (e.g. XLOCAL=NAMED), or an ordered list
(e.g. XLOCAL="NAMED:PTS:SCO"). his variable overrides the compiled-in
defaults. For SVR4 it is recommended that NAMED be the first prefer-
ence connection. The default setting is PTS:NAMED:ISC:SCO.
To globally override the compiled-in defaults, you should define (and
export if using sh or ksh) XLOCAL globally. If you use startx(1) or
xinit(1), the definition should be at the top of your .xinitrc file.
If you use xdm(1), the definitions should be early on in the
/usr/X11R6/lib/X11/xdm/Xsession script.
OPTIONS
XFree86 supports several mechanisms for supplying/obtaining configura-
tion and run-time parameters: command line options, environment vari-
ables, the XF86Config(5) configuration file, auto-detection, and fall-
back defaults. When the same information is supplied in more than one
way, the highest precedence mechanism is used. The list of mechanisms
is ordered from highest precedence to lowest. Note that not all param-
eters can be supplied via all methods. The available command line
options and environment variables (and some defaults) are described
here and in the Xserver(1) manual page. Most configuration file param-
eters, with their defaults, are described in the XF86Config(5) manual
page. Driver and module specific configuration parameters are
described in the relevant driver or module manual page.
Starting with version 4.4, XFree86 has support for generating a usable
configuration at run-time when no XF86Config(5) configuration file is
provided. The initial version of this automatic configuration support
is targeted at the most popular hardware and software platforms sup-
ported by XFree86. Some details about how this works can be found in
the CONFIGURATION section below and in the getconfig(1) manual page.
In addition to the normal server options described in the Xserver(1)
manual page, XFree86 accepts the following command line switches:
vtXX XX specifies the Virtual Terminal device number which XFree86
will use. Without this option, XFree86 will pick the first
available Virtual Terminal that it can locate. This option
applies only to platforms such as Linux, BSD, SVR3 and SVR4,
that have virtual terminal support.
-allowMouseOpenFail
Allow the server to start up even if the mouse device can't be
opened or initialised. This is equivalent to the Allow-
MouseOpenFail XF86Config(5) file option.
-allowNonLocalModInDev
Allow changes to keyboard and mouse settings from non-local
clients. By default, connections from non-local clients are
not allowed to do this. This is equivalent to the AllowNonLo-
calModInDev XF86Config(5) file option.
-allowNonLocalXvidtune
Make the VidMode extension available to remote clients. This
allows the xvidtune client to connect from another host. This
is equivalent to the AllowNonLocalXvidtune XF86Config(5) file
option. By default non-local connections are not allowed.
-appendauto
Append the automatic XFree86 server configuration data to an
existing configuration file. By default this is only done when
an existing configuration file does not contain any ServerLay-
out sections or any Screen sections. This can be useful for
providing configuration details for things not currently han-
dled by the automatic configuration mechanism, such as input
devices, font paths, etc.
-autoconfig
Use automatic XFree86 server configuration, even if a configu-
ration file is available. By default automatic configuration
is only used when a configuration file cannot be found.
-bgamma value
Set the blue gamma correction. value must be between 0.1 and
10. The default is 1.0. Not all drivers support this. See
also the -gamma, -rgamma, and -ggamma options.
-bpp n No longer supported. Use -depth to set the color depth, and
use -fbbpp if you really need to force a non-default frame-
buffer (hardware) pixel format.
-configure
When this option is specified, the XFree86 server loads all
video driver modules, probes for available hardware, and writes
out an initial XF86Config(5) file based on what was detected.
This option currently has some problems on some platforms, but
in most cases it is a good way to bootstrap the configuration
process. This option is only available when the server is run
as root (i.e, with real-uid 0).
-crt /dev/ttyXX
SCO only. This is the same as the vt option, and is provided
for compatibility with the native SCO X server.
-depth n
Sets the default color depth. Legal values are 1, 4, 8, 15,
16, and 24. Not all drivers support all values.
-disableModInDev
Disable dynamic modification of input device settings. This is
equivalent to the DisableModInDev XF86Config(5) file option.
-disableVidMode
Disable the the parts of the VidMode extension (used by the
xvidtune client) that can be used to change the video modes.
This is equivalent to the DisableVidModeExtension XF86Config(5)
file option.
-fbbpp n
Sets the number of framebuffer bits per pixel. You should only
set this if you're sure it's necessary; normally the server can
deduce the correct value from -depth above. Useful if you want
to run a depth 24 configuration with a 24 bpp framebuffer
rather than the (possibly default) 32 bpp framebuffer (or vice
versa). Legal values are 1, 8, 16, 24, 32. Not all drivers
support all values.
-flipPixels
Swap the default values for the black and white pixels.
-gamma value
Set the gamma correction. value must be between 0.1 and 10.
The default is 1.0. This value is applied equally to the R, G
and B values. Those values can be set independently with the
-rgamma, -bgamma, and -ggamma options. Not all drivers support
this.
-ggamma value
Set the green gamma correction. value must be between 0.1 and
10. The default is 1.0. Not all drivers support this. See
also the -gamma, -rgamma, and -bgamma options.
-ignoreABI
The XFree86 server checks the ABI revision levels of each mod-
ule that it loads. It will normally refuse to load modules
with ABI revisions that are newer than the server's. This is
because such modules might use interfaces that the server does
not have. When this option is specified, mismatches like this
are downgraded from fatal errors to warnings. This option
should be used with care.
-keeptty
Prevent the server from detaching its initial controlling ter-
minal. This option is only useful when debugging the server.
Not all platforms support (or can use) this option.
-keyboard keyboard-name
Use the XF86Config(5) file InputDevice section called keyboard-
name as the core keyboard. This option is ignored when the
ServerLayout section specifies a core keyboard. In the absence
of both a ServerLayout section and this option, the first rele-
vant InputDevice section is used for the core keyboard.
-layout layout-name
Use the XF86Config(5) file ServerLayout section called layout-
name. By default the first ServerLayout section is used.
-logfile filename
Use the file called filename as the XFree86 server log file.
The default log file is __logdir__/XFree86.n.log on most plat-
forms, where n is the display number of the XFree86 server.
The default may be in a different directory on some platforms.
This option is only available when the server is run as root
(i.e, with real-uid 0).
-logverbose [n]
Sets the verbosity level for information printed to the XFree86
server log file. If the n value isn't supplied, each occur-
rence of this option increments the log file verbosity level.
When the n value is supplied, the log file verbosity level is
set to that value. The default log file verbosity level is 3.
-modulepath searchpath
Set the module search path to searchpath. searchpath is a
comma separated list of directories to search for XFree86
server modules. This option is only available when the server
is run as root (i.e, with real-uid 0).
-noappendauto
Disable appending the automatic XFree86 server configuration to
a partial static configuration.
-nosilk Disable Silken Mouse support.
-pixmap24
Set the internal pixmap format for depth 24 pixmaps to 24 bits
per pixel. The default is usually 32 bits per pixel. There is
normally little reason to use this option. Some client appli-
cations don't like this pixmap format, even though it is a per-
fectly legal format. This is equivalent to the Pixmap XF86Config(5)
file option.
-pixmap32
Set the internal pixmap format for depth 24 pixmaps to 32 bits
per pixel. This is usually the default. This is equivalent to
the Pixmap XF86Config(5) file option.
-pointer pointer-name
Use the XF86Config(5) file InputDevice section called pointer-
name as the core pointer. This option is ignored when the
ServerLayout section specifies a core pointer. In the absence
of both a ServerLayout section and this option, the first rele-
vant InputDevice section is used for the core pointer.
-probeonly
Causes the server to exit after the device probing stage. The
XF86Config(5) file is still used when this option is given, so
information that can be auto-detected should be commented out.
-quiet Suppress most informational messages at startup. The verbosity
level is set to zero.
-rgamma value
Set the red gamma correction. value must be between 0.1 and
10. The default is 1.0. Not all drivers support this. See
also the -gamma, -bgamma, and -ggamma options.
-scanpci
When this option is specified, the XFree86 server scans the PCI
bus, and prints out some information about each device that was
detected. See also scanpci(1) and pcitweak(1).
-screen screen-name
Use the XF86Config(5) file Screen section called screen-name.
By default the screens referenced by the default ServerLayout
section are used, or the first Screen section when there are no
ServerLayout sections.
-showconfig
This is the same as the -version option, and is included for
compatibility reasons. It may be removed in a future release,
so the -version option should be used instead.
-weight nnn
Set RGB weighting at 16 bpp. The default is 565. This applies
only to those drivers which support 16 bpp.
-verbose [n]
Sets the verbosity level for information printed on stderr. If
the n value isn't supplied, each occurrence of this option
increments the verbosity level. When the n value is supplied,
the verbosity level is set to that value. The default ver-
bosity level is 0.
-version
Print out the server version, patchlevel, release date, the
operating system/platform it was built on, and whether it
includes module loader support.
-xf86config file
Read the server configuration from file. This option will work
for any file when the server is run as root (i.e, with real-uid
0), or for files relative to a directory in the config search
path for all other users.
KEYBOARD
The XFree86 server is normally configured to recognize various special
combinations of key presses that instruct the server to perform some
action, rather than just sending the key press event to a client appli-
cation. The default XKEYBOARD keymap defines the key combinations
listed below. The server also has these key combinations builtin to
its event handler for cases where the XKEYBOARD extension is not being
used. When using the XKEYBOARD extension, which key combinations per-
form which actions is completely configurable.
For more information about when the builtin event handler is used to
recognize the special key combinations, see the documentation on the
HandleSpecialKeys option in the XF86Config(5) man page.
The special combinations of key presses recognized directly by XFree86
are:
Ctrl+Alt+Backspace
Immediately kills the server -- no questions asked. This can
be disabled with the DontZap XF86Config(5) file option.
Ctrl+Alt+Keypad-Plus
Change video mode to next one specified in the configuration
file. This can be disabled with the DontZoom XF86Config(5)
file option.
Ctrl+Alt+Keypad-Minus
Change video mode to previous one specified in the configura-
tion file. This can be disabled with the DontZoom XF86Config(5)
file option.
Ctrl+Alt+Keypad-Multiply
Not treated specially by default. If the AllowClosedownGrabs
XF86Config(5) file option is specified, this key sequence kills
clients with an active keyboard or mouse grab as well as
killing any application that may have locked the server, nor-
mally using the XGrabServer(3) Xlib function.
Ctrl+Alt+Keypad-Divide
Not treated specially by default. If the AllowDeactivateGrabs
XF86Config(5) file option is specified, this key sequence deac-
tivates any active keyboard and mouse grabs.
Ctrl+Alt+F1...F12
For BSD and Linux systems with virtual terminal support, these
keystroke combinations are used to switch to virtual terminals
1 through 12, respectively. This can be disabled with the
DontVTSwitch XF86Config(5) file option.
CONFIGURATION
XFree86 typically uses a configuration file called XF86Config for its
initial setup. Refer to the XF86Config(5) manual page for information
about the format of this file.
Starting with version 4.4, XFree86 has a mechanism for automatically
generating a built-in configuration at run-time when no XF86Config file
is present. The current version of this automatic configuration mecha-
nism works in three ways.
The first is via enhancements that have made many components of the
XF86Config file optional. This means that information that can be
probed or reasonably deduced doesn't need to be specified explicitly,
greatly reducing the amount of built-in configuration information that
needs to be generated at run-time.
The second is to use an external utility called getconfig(1), when
available, to use meta-configuration information to generate a suitable
configuration for the primary video device. The meta-configuration
information can be updated to allow an existing installation to get the
best out of new hardware or to work around bugs that are found post-
release.
The third is to have "safe" fallbacks for most configuration informa-
tion. This maximises the likelihood that the XFree86 server will start
up in some usable configuration even when information about the spe-
cific hardware is not available.
The automatic configuration support for XFree86 is work in progress.
It is currently aimed at the most popular hardware and software plat-
forms supported by XFree86. Enhancements are planned for future
releases.
FILES
The XFree86 server config file can be found in a range of locations.
These are documented fully in the XF86Config(5) manual page. The most
commonly used locations are shown here.
/etc/X11/XF86Config Server configuration file.
/etc/X11/XF86Config-4 Server configuration file.
/etc/XF86Config Server configuration file.
/usr/X11R6/etc/XF86Config Server configuration file.
/usr/X11R6/lib/X11/XF86Config Server configuration file.
__logdir__/XFree86.n.log Server log file for display n.
/usr/X11R6/bin/* Client binaries.
/usr/X11R6/include/* Header files.
/usr/X11R6/lib/* Libraries.
/usr/X11R6/lib/X11/fonts/* Fonts.
/usr/X11R6/lib/X11/rgb.txt Color names to RGB mapping.
/usr/X11R6/lib/X11/XErrorDB Client error message database.
/usr/X11R6/lib/X11/app-defaults/*
Client resource specifications.
/usr/X11R6/man/man?/* Manual pages.
/etc/Xn.hosts Initial access control list for display
n.
SEE ALSO
X(7), Xserver(1), xdm(1), xinit(1), XF86Config(5), xf86config(1),
xf86cfg(1), xvidtune(1), apm(4), ati(4), chips(4), cirrus(4), cyrix(4),
fbdev(4), glide(4), glint(4), i128(4), i740(4), i810(4), imstt(4),
mga(4), neomagic(4), nsc(4), nv(4), r128(4), rendition(4), s3virge(4),
siliconmotion(4), sis(4), sunbw2(4), suncg14(4), suncg3(4), suncg6(4),
sunffb(4), sunleo(4), suntcx(4), tdfx(4), tga(4), trident(4), tseng(4),
v4l(4), vesa(4), vga(4), vmware(4),
README <http://www.xfree86.org/current/README.html>,
RELNOTES <http://www.xfree86.org/current/RELNOTES.html>,
README.mouse <http://www.xfree86.org/current/mouse.html>,
README.DRI <http://www.xfree86.org/current/DRI.html>,
Install <http://www.xfree86.org/current/Install.html>.
AUTHORS
XFree86 has many contributors world wide. The names of most of them
can be found in the documentation, CHANGELOG files in the source tree,
and in the actual source code. The names of the contributors to the
current release can be found in the release notes
<http://www.xfree86.org/current/RELNOTES.html>.
XFree86 was originally based on X386 1.2 by Thomas Roell, which was
contributed to the then X Consortium's X11R5 distribution by SGCS.
The project that became XFree86 was originally founded in 1992 by David
Dawes, Glenn Lai, Jim Tsillas and David Wexelblat.
XFree86 was later integrated in the then X Consortium's X11R6 release
by a group of dedicated XFree86 developers, including the following:
Stuart Anderson, Doug Anson, Gertjan Akkerman, Mike Bernson, Robin
Cutshaw, David Dawes, Marc Evans, Pascal Haible, Matthieu Herrb,
Dirk Hohndel, David Holland, Alan Hourihane, Jeffrey Hsu, Glenn
Lai, Ted Lemon, Rich Murphey, Hans Nasten, Mark Snitily, Randy Ter-
bush, Jon Tombs, Kees Verstoep, Paul Vixie, Mark Weaver, David Wex-
elblat, Philip Wheatley, Thomas Wolfram, Orest Zborowski.
Contributors to XFree86 4.4.0 include:
Roi a Torkilsheyggi, Dave Airlie, Andrew Aitchison, Marco Antonio
Alvarez, Alexandr Andreev, Jack Angel, Eric Anholt, Ani, Juuso
Ĺberg, Sergey Babkin, Alexey Baj, Bang Jun-Young, Uberto Barbini,
Kyle Bateman, Matthew W. S. Bell, Vano Beridze, Hiroyuki Bessho,
Andrew Bevitt, Christian Biere, Martin Birgmeier, Jakub Bogusz, Le
Hong Boi, Paul Bolle, Charl Botha, Stanislav Brabec, Eric Branlund,
Rob Braun, Peter Breitenlohner, Michael Breuer, Kevin Brosius,
Frederick Bruckman, Oswald Buddenhagen, Nilgün Belma Bugüner,
Julian Cable, Yukun Chen, Ping Cheng, Juliusz Chroboczek, Fred
Clift, Alan Coopersmith, Martin Costabel, Alan Cox, Michel Dänzer,
David Dawes, Leif Delgass, Richard Dengler, John Dennis, Thomas
Dickey, Randy Dunlap, Chris Edgington, Paul Eggert, Paul Elliott,
Emmanuel, Visanu Euarchukiati, Mike Fabian, Rik Faith, Brian Feld-
man, Wu Jian Feng, Kevin P. Fleming, Jose Fonseca, Hugues Fournier,
Miguel Freitas, Quentin Garnier, Břrre Gaup, Michael Geddes, Frank
Giessler, Hansruedi Glauser, Wolfram Gloger, Alexander Gottwald,
Guido Guenther, Ralf Habacker, Bruno Haible, Lindsay Haigh, John
Harper, James Harris, Mike A. Harris, Bryan W. Headley, John
Heasley, Thomas Hellström, Matthieu Herrb, Jonathan Hough, Alan
Hourihane, Joel Ray Holveck, Harold L Hunt II, Ricardo Y. Igarashi,
Mutsumi ISHIKAWA , Tsuyoshi ITO, Kean Johnston, Nicolas JOLY, Phil
Jones, Roman Kagan, Theppitak Karoonboonyanan, Etsushi Kato, Koike
Kazuhiko, Aidan Kehoe, Juergen Keil, Andreas Kies, Thomas Klausner,
Mario Klebsch, Egmont Koblinger, Vlatko Kosturjak, Kusanagi
Kouichi, Mel Kravitz, Peter Kunzmann, Nick Kurshev, Mashrab Kuva-
tov, Marc La France, Radics Laszlo, Zarick Lau, Nolan Leake, Michel
Lespinasse, Noah Levitt, Dave Love, H.J. Lu, Lubos Lunak, Sven
Luther, Torrey T. Lyons, Calum Mackay, Paul Mackerras, Roland
Mainz, Kevin Martin, Michal Maruska, Kensuke Matsuzaki, maxim,
Stephen McCamant, Ferris McCormick, Luke Mewburn, Nicholas Miell,
Robert Millan, Hisashi MIYASHITA, Gregory Mokhin, Patrik Mont-
gomery, Joe Moss, Josselin Mouette, Frank Murphy, Reiko Nakajima,
Paul Nasrat, Dan Nelson, Bastien Nocera, Alexandre Oliva, Hideki
ONO, Peter Osterlund, Sergey V. Oudaltsov, Séamus Ó Ciardhuáin, Bob
Paauwe, Paul Pacheco, Tom Pala, Ivan Pascal, T. M. Pederson, Earle
F. Philhower III, Nils Philippsen, Manfred Pohler, Alexander
Pohoyda, Alain Poirier, Arnaud Quette, Jim Radford, Dale Rahn,
Lucas Correia Villa Real, René Rebe, Tyler Retzlaff, Sebastian Rit-
tau, Tim Roberts, Alastair M. Robinson, Branden Robinson, Daniel
Rock, Ian Romanick, Bernhard Rosenkraenzer, Mĺns Rullgĺrd, Andriy
Rysin, Supphachoke Santiwichaya, Pablo Saratxaga, Matthias Scheler,
Jens Schweikhardt, Danilo Segan, Shantonu Sen, Stas Sergeev, Jung-
shik Shin, Nikola Smolenski, Andreas Stenglein, Paul Stewart,
Alexander Stohr, Alan Strohm, Will Styles, James Su, Mike Sulivan,
Ville Syrjala, Slava Sysoltsev, Akira TAGOH, Toshimitsu Tanaka,
Akira Taniguchi, Owen Taylor, Neil Terry, Jonathan Thambidurai,
John Tillman, Adam Tlalka, Linus Torvalds, Christian Tosta, Warren
Turkal, Stephen J. Turnbull, Ted Unangst, Mike Urban, Simon Vallet,
Thuraiappah Vaseeharan, Luc Verhaegen, Yann Vernier, Michail Vidi-
assov, Sebastiano Vigna, Mark Vojkovich, Stephane Voltz, Boris
Weissman, Keith Whitwell, Thomas Winischhofer, Eric Wittry, Kim
Woelders, Roy Wood, Jason L. Wright, Joerg Wunsch, Chisato
Yamauchi, Hui Yu.
Contributors to XFree86 4.5.0 include:
Szilveszter Adam, Tim Adye, Taneem Ahmed, Andrew Aitchison, Raoul
Arranz, Zaeem Arshad, Dwayne Bailey, Ilyas Bakirov, Denis Barbier,
Kyle Bateman, J. Scott Berg, Thomas Biege, Dmitry Bolkhovityanov, H
Merijn Brand, Peter Breitenlohner, Benjamin Burke, Dale L Busacker,
busmanus, Julian Cable, Mike Castle, David M. Clay, Philip Clayton,
Alan Coopersmith, Ricardo Cruz, Michel Dänzer, J. D. Darling, David
Dawes, Michael Dawes, Rafael Ávila de Espíndola, Rick De Laet,
Josip Deanovic, Angelus Dei, Laurent Deniel, Thomas Dickey, Stefan
Dirsch, Charles Dobson, DRI Project, Emmanuel Dreyfus, Boris Dusek,
Georgina O. Economou, Egbert Eich, Bernd Ernesti, Chris Evans, Rik
Faith, Adrian Fiechter, Matthew Fischer, FreeType Team, Terry R.
Frienrichsen, Christopher Fynn, Hubert Gburzynski, Nicolas George,
Frank Giessler, Fred Gleason, Dmitry Golubev, Alexander Gottwald,
Herbert Graeber, Miroslav Halas, John Harper, Harshula, John
Heasley, Matthieu Herrb, David Holl, Alex Holland, Peng Hongbo,
Alan Hourihane, Harold L Hunt II, Alan Iwi, Timur Jamakeev, Paul
Jarc, Kean Johnston, Nicolas Joly, Mark Kandianis, Kaleb Keithley,
Chamath Keppitiyagama, Jung-uk Kim, Satoshi Kimura, Michael Knud-
sen, Vlatko Kosturjak, Alexei Kosut, Anton Kovalenko, Joachim Kue-
bart, Marc La France, David Laight, Zarick Lau, Pierre Lalet,
Michael Lampe, Lanka Linux User Group, Nolan Leake, Werner Lemberg,
Dejan Lesjak, Noah Levitt, Greg Lewis, Bernhard R Link, Jonas Lund,
S. Lussos, Torrey T. Lyons, Roland Mainz, N Marci, Kevin Martin,
Stephen McCamant, Mesa Developers, Luke Mewburn, Petr Mladek, Bram
Moolenaar, Steve Murphy, Ishikawa MUTSUMI, Radu Octavian, Lee
Olsen, Greg Parker, Ivan Pascal, Alexander E. Patrakov, Mike
Pechkin, Soós Péter, Zvezdan Petkovic, Alexander Pohoyda, Xie Qian,
Bill Randle, Adam J. Richter, Tim Roberts, Bernhard Rosenkraenzer,
Andreas Rüden, Steve Rumble, Oleg Safiullin, Ty Sarna, Leo Sav-
ernik, Barry Scott, Shantonu Sen, Yu Shao, Andreas Schwab, Matthias
Scheler, Dan Shearer, Michael Shell, Paul Shupak, Alexander Stohr,
Marius Strobl, Mikko Markus Torni, Jess Thrysoee, Izumi Tsutsui,
Tungsten Graphics, Ryan Underwood, Tristan Van Berkom, Michael van
Elst, Phillip Vandry, Roman Vasylyev, Luc Verhaegen, Rodion
Vshevtsov, Mark Vojkovich, Edi Werner, Keith Whitwell, Scot
Wilcoxon, Dave Williss, Thomas Winischhofer, Kuang-che Wu, X-Oz
Technologies, Chisato Yamauchi, Michael Yaroslavtsev, David Yerger,
Su Yong, Hui Yu, Sagi Zeevi, Christian Zietz
XFree86 source is available from the FTP server
<ftp://ftp.XFree86.org/pub/XFree86/>, and from the XFree86 CVS server
<http://www.xfree86.org/cvs/>. Documentation and other information can
be found from the XFree86 web site <http://www.xfree86.org/>.
LEGAL
XFree86 is copyright software, provided under licenses that permit mod-
ification and redistribution in source and binary form without fee.
Portions of XFree86 are copyright by The XFree86 Project, Inc. and
numerous authors and contributors from around the world. Licensing
information can be found at <http://www.xfree86.org/cur-
rent/LICENSE.html>. Refer to the source code for specific copyright
notices.
XFree86(R) is a registered trademark of The XFree86 Project, Inc.
4.5.0 XFree86 XFree86(1)
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.