rt(4) - NetBSD Manual Pages

Command: Section: Arch: Collection:  
RT(4)                   NetBSD Kernel Interfaces Manual                  RT(4)

rt -- AIMS Lab Radiotrack FM radio device driver
rt0 at isa? port 0x20c rt1 at isa? port 0x284 rt2 at isa? port 0x30c rt3 at isa? port 0x384 radio* at rt?
The rt driver provides support for the AIMS Lab Radiotrack FM radio tuners and compatible RadioReveal RA300 and SoundForte RadioX SF16-FMI FM radio tuners. The Radiotrack is a stereo FM tuner that allows to tune in the range 87.5 - 108.0 MHz, report signal status on the current frequency, and force audio output to mono. The Radiotrack cards take only one I/O port. The I/O port is set by the driver to the value specified in the configuration file and must be either 0x20c or 0x30c.
isa(4), radio(4)
The rt device driver appeared in OpenBSD 3.0 and NetBSD 1.6.
The rt driver was written by Vladimir Popov and Maxim Tsyplakov. The man page was written by Vladimir Popov.
Support for the SF16-FMI cards is rather ugly, volume control is not working and the driver can not correctly determine signal state. NetBSD 4.0 October 8, 2001 NetBSD 4.0
Powered by man-cgi (2024-03-20). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.