sdpquery(1) - NetBSD Manual Pages

SDPQUERY(1)             NetBSD General Commands Manual             SDPQUERY(1)


NAME
sdpquery -- SDP query utility
SYNOPSIS
sdpquery -h sdpquery [-d device] -a address command [parameters ...] sdpquery [-c path] -l command [parameters ...]
DESCRIPTION
The sdpquery utility attempts to query the specified Service Discovery Protocol (SDP) server. Remote SDP servers are identified by their address. Connection to the local SDP server is made via the control socket. The sdpquery utility uses Service Search Attribute Requests and prints results to standard output and error messages to standard error. The options are as follows: -a address Connect to the remote device with the specified address. The address can be specified as BD_ADDR or a name. If a name was specified, the sdpquery utility attempts to resolve the name via bt_gethostbyname(3). If no remote address is given, sdpquery attempts to contact a local SDP server via the control socket. -c path Specify path to the control socket. The default path is /var/run/sdp. -d device Connect from the local device with the specifed address. The device can be specified by BD_ADDR or device name. See btconfig(8) for a list of devices available. If no device is specified, the sdpquery utility will use the best available. -l Query the local SDP server via the control socket. -h Display usage message and exit. command One of the supported commands (see below). parameters One or more optional space separated command parameters.
COMMANDS
The currently supported commands in sdpquery are: Browse [group] Browse for services. The group parameter is a 16-bit UUID of the group to browse. If omitted, the Public Browse Group. is used. Search service Search for the service. The service parameter is a 16-bit UUID of the service to search for. For the following services it is possible to use service name instead of service UUID: CIP Common ISDN Access CTP Cordless Telephony DUN DialUp Networking FAX Fax FTRN OBEX File Transfer GN GN HID Human Interface Device HF Handsfree HSET Headset LAN LAN Access Using PPP NAP Network Access Point OPUSH OBEX Object Push SP Serial Port
EXIT STATUS
The sdpquery utility exits 0 on success, and >0 if an error occurs.
SEE ALSO
bluetooth(3), sdp(3), btconfig(8), sdpd(8)
HISTORY
The sdpquery command first appeared in FreeBSD 5.3 as sdpcontrol. It was ported to NetBSD 4.0 under its present name by Iain Hibbert under the sponsorship of Itronix, Inc.
AUTHORS
Maksim Yevmenkin <m_evmenkin@yahoo.com> Iain Hibbert for Itronix, Inc.
CAVEATS
The sdpquery utility only requests the following attributes from the SDP server: 1. Service Record Handle 2. Service Class ID List 3. Protocol Descriptor List 4. Bluetooth Profile Descriptor List NetBSD 4.0 August 17, 2006 NetBSD 4.0

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.