sdpquery(1)
- NetBSD Manual Pages
SDPQUERY(1) NetBSD General Commands Manual SDPQUERY(1)
NAME
sdpquery -- SDP query utility
SYNOPSIS
sdpquery -h
sdpquery [-d device] -a address command [parameters ...]
sdpquery [-c path] -l command [parameters ...]
DESCRIPTION
The sdpquery utility attempts to query the specified Service Discovery
Protocol (SDP) server. Remote SDP servers are identified by their
address. Connection to the local SDP server is made via the control
socket. The sdpquery utility uses Service Search Attribute Requests and
prints results to standard output and error messages to standard error.
The options are as follows:
-a address
Connect to the remote device with the specified address. The
address can be specified as BD_ADDR or a name. If a name was
specified, the sdpquery utility attempts to resolve the name via
bt_gethostbyname(3). If no remote address is given, sdpquery
attempts to contact a local SDP server via the control socket.
-c path
Specify path to the control socket. The default path is
/var/run/sdp.
-d device
Connect from the local device with the specifed address. The
device can be specified by BD_ADDR or device name. See
btconfig(8) for a list of devices available. If no device is
specified, the sdpquery utility will use the best available.
-l Query the local SDP server via the control socket.
-h Display usage message and exit.
command
One of the supported commands (see below).
parameters
One or more optional space separated command parameters.
COMMANDS
The currently supported commands in sdpquery are:
Browse [group]
Browse for services. The group parameter is a 16-bit UUID of the
group to browse. If omitted, the Public Browse Group. is used.
Search service
Search for the service. The service parameter is a 16-bit UUID
of the service to search for. For the following services it is
possible to use service name instead of service UUID:
CIP Common ISDN Access
CTP Cordless Telephony
DUN DialUp Networking
FAX Fax
FTRN OBEX File Transfer
GN GN
HID Human Interface Device
HF Handsfree
HSET Headset
LAN LAN Access Using PPP
NAP Network Access Point
OPUSH OBEX Object Push
SP Serial Port
EXIT STATUS
The sdpquery utility exits 0 on success, and >0 if an error occurs.
SEE ALSO
bluetooth(3), sdp(3), btconfig(8), sdpd(8)
HISTORY
The sdpquery command first appeared in FreeBSD 5.3 as sdpcontrol. It was
ported to NetBSD 4.0 under its present name by Iain Hibbert under the
sponsorship of Itronix, Inc.
AUTHORS
Maksim Yevmenkin <m_evmenkin@yahoo.com>
Iain Hibbert for Itronix, Inc.
CAVEATS
The sdpquery utility only requests the following attributes from the SDP
server:
1. Service Record Handle
2. Service Class ID List
3. Protocol Descriptor List
4. Bluetooth Profile Descriptor List
NetBSD 4.0.1 August 17, 2006 NetBSD 4.0.1
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.