systrace(4)
- NetBSD Manual Pages
SYSTRACE(4) NetBSD Kernel Interfaces Manual SYSTRACE(4)
NAME
systrace -- enforce and generate policies for system calls
SYNOPSIS
options SYSTRACE
DESCRIPTION
The systrace kernel facility provides a mechanism to manipulate and
enforce access policies for system calls. Using the systrace facility it
is possible to monitor and control a process's access to the kernel
through system calls.
Access to the systrace facility is provided to userland processes, such
as systrace(1), through an ioctl(2) interface on the pseudo-device
/dev/systrace. This interface allows messages to be sent from the kernel
to the userland process to request confirmation of an access policy.
The systrace facility can assign the following policies to system calls
for a specific process:
SYSTR_POLICY_ASK
Send a message on /dev/systrace requesting the access pol-
icy for the system call.
SYSTR_POLICY_PERMIT
Immediately allow the system call.
SYSTR_POLICY_NEVER
Immediately deny the system call and return an error code.
SYSTRACE MESSAGES
A read(2) operation on the systrace pseudo-device will block if there are
no pending messages, or return the following structure:
struct str_message {
int32_t msg_type;
#define SYSTR_MSG_ASK 1
#define SYSTR_MSG_RES 2
#define SYSTR_MSG_EMUL 3
#define SYSTR_MSG_CHILD 4
#define SYSTR_MSG_UGID 5
#define SYSTR_MSG_POLICYFREE 6
#define SYSTR_MSG_EXECVE 7
#define SYSTR_MSG_SCRIPTNAME 8
pid_t msg_pid;
uint16_t msg_seqnr; /* answer has to match seqnr */
int16_t msg_policy;
union {
struct str_msg_emul msg_emul;
struct str_msg_ugid msg_ugid;
struct str_msg_ask msg_ask;
struct str_msg_child msg_child;
struct str_msg_execve msg_execve;
} msg_data;
};
struct str_msg_emul {
char emul[SYSTR_EMULEN];
};
struct str_msg_ugid {
uid_t uid;
gid_t gid;
};
struct str_msg_execve {
char path[MAXPATHLEN];
};
struct str_msg_ask {
int32_t code;
int32_t argsize;
register_t args[SYSTR_MAXARGS];
register_t rval[2];
int32_t result;
};
struct str_msg_child {
pid_t new_pid;
};
These messages are all sent to the userland control process.
SYSTR_MSG_ASK This message is sent whenever the kernel does not
have a cached simple policy for system call number
code within the currently set emulation.
SYSTR_MSG_RES This message is sent whenever a system call is
flagged with SYSTR_FLAGS_RESULT.
SYSTR_MSG_EMUL This message is sent whenever a process gains a
child.
SYSTR_MSG_UGID This message is sent whenever the effective UID or
GID has changed during the execution of a system
call.
SYSTR_MSG_POLICYFREE This message is sent whenever the kernel frees the
policy identified by msg_policy.
SYSTR_MSG_EXECVE This message is sent whenever, before a call to
execve(2) a process is privileged (technically, the
process has the ,Dv P_SUGID flag set), but after
the call these privileges have been dropped. The
new image name is specified in the path argument.
IOCTL INTERFACE
The systrace facility supports the following ioctl(2) operations:
STRIOCATTACH pid_t
Attach to the process with the specified process ID. This opera-
tion will fail under the following conditions:
1. The process is trying to attach to itself.
2. The process is a system process.
3. The process is being traced already.
4. You do not own the process and you are not root.
5. The process is init(8), and the kernel was not compiled
with option INSECURE.
STRIOCDETACH pid_t
Wake up the process if it is waiting for an answer, and detach
from it.
STRIOCANSWER struct systrace_answer
Notify the systrace facility in response to a SYSTR_MSG_ASK mes-
sage what to do with a system call that was assigned a policy of
SYSTR_POLICY_ASK.
struct systrace_answer {
pid_t stra_pid; /* PID of process being traced */
uint16_t stra_seqnr;
int16_t reserved;
uid_t stra_seteuid;
gid_t stra_setegid;
int32_t stra_policy; /* Policy to assign */
int32_t stra_error; /* Return value of denied syscall
(will return EPERM if zero) */
int32_t stra_flags;
#define SYSTR_FLAGS_RESULT 0x0001 /* Report syscall result */
#define SYSTR_FLAGS_SETEUID 0x002
#define SYSTR_FLAGS_SETEGID 0x004
};
Valid return values for stra_policy are SYSTR_POLICY_PERMIT,
SYSTR_POLICY_ASK, and SYSTR_POLICY_NEVER.
STRIOCIO struct systrace_io
Copy data in/out of the process being traced.
struct systrace_io {
pid_t strio_pid; /* PID of process being traced */
int32_t strio_ops;
#define SYSTR_READ 1
#define SYSTR_WRITE 2
void *strio_offs;
void *strio_addr;
size_t strio_len;
};
STRIOCPOLICY struct systrace_policy
Manipulate the set of policies.
struct systrace_policy {
int strp_op;
#define SYSTR_POLICY_NEW 1 /* Allocate a new policy */
#define SYSTR_POLICY_ASSIGN 2 /* Assign policy to process */
#define SYSTR_POLICY_MODIFY 3 /* Modify an entry */
int32_t strp_num;
union {
struct {
int16_t code;
#define SYSTR_POLICY_ASK 0
#define SYSTR_POLICY_PERMIT 1
#define SYSTR_POLICY_NEVER 2
int16_t policy;
} assign;
pid_t pid;
int32_t maxents;
} strp_data;
#define strp_pid strp_data.pid
#define strp_maxents strp_data.maxents
#define strp_code strp_data.assign.code
#define strp_policy strp_data.assign.policy
};
The SYSTR_POLICY_NEW operation allocates a new policy with all
entries initialized to SYSTR_POLICY_ASK, and returns the new pol-
icy number into strp_num. The SYSTR_POLICY_ASSIGN operation
attaches the policy identified by strp_num to strp_pid, with a
maximum of strp_maxents entries. The SYSTR_POLICY_MODIFY opera-
tion changes the entry indexed by strp_code to strp_policy.
STRIOCGETCWD pid_t
Set the working directory of the current process to that of the
specified process.
STRIOCRESCWD
Restore the working directory of the current process.
STRIOCREPORT pid_t *
Report the current emulation a process is using inside the
msg_emul structure.
STRIOCREPLACE struct systrace_replace *
Arrange for system call arguments to be replaced by arguments
supplied by the monitoring process.
struct systrace_replace {
pid_t strr_pid;
uint16_t strr_seqnr;
int16_t reserved;
int32_t strr_nrepl; /* # of arguments to replace */
caddr_t strr_base; /* Base user memory */
size_t strr_len; /* Length of memory */
int32_t strr_argind[SYSTR_MAXARGS]; /* Argument indexes */
size_t strr_off[SYSTR_MAXARGS]; /* Argumen offsets */
size_t strr_offlen[SYSTR_MAXARGS]; /* Argument sizes */
int32_t strr_flags[SYSTR_MAXARGS];
};
STRIOCSCRIPTNAME struct systrace_scriptname *
Set the path of executed scripts to sn_scriptname.
struct systrace_scriptname {
pid_t sn_pid;
char sn_scriptname[MAXPATHLEN];
};
FILES
/dev/systrace system call tracing facility
SEE ALSO
systrace(1), ioctl(2), read(2), options(4), init(8)
HISTORY
The systrace facility first appeared in OpenBSD 3.2, and then in
NetBSD 2.0.
CAVEATS
When creating new policies, if strp_maxents is not large enough to accom-
modate any system calls needed for fundamental process operations, the
traced process will block forever.
NetBSD 4.0.1 June 30, 2005 NetBSD 4.0.1
Powered by man-cgi (2024-03-20).
Maintained for NetBSD
by Kimmo Suominen.
Based on man-cgi by Panagiotis Christias.