GCC(1) GNU GCC(1)
NAME
gcc - GNU project C and C++ compiler
SYNOPSIS
gcc [-c|-S|-E] [-std=standard] [-g] [-pg] [-Olevel] [-Wwarn...] [-pedantic] [-Idir...] [-Ldir...] [-Dmacro[=defn]...] [-Umacro] [-foption...] [-mmachine-option...] [-o outfile] infile... Only the most useful options are listed here; see below for the remain- der. g++ accepts mostly the same options as gcc.
DESCRIPTION
When you invoke GCC, it normally does preprocessing, compilation, assembly and linking. The ``overall options'' allow you to stop this process at an intermediate stage. For example, the -c option says not to run the linker. Then the output consists of object files output by the assembler. Other options are passed on to one stage of processing. Some options control the preprocessor and others the compiler itself. Yet other options control the assembler and linker; most of these are not docu- mented here, since you rarely need to use any of them. Most of the command line options that you can use with GCC are useful for C programs; when an option is only useful with another language (usually C++), the explanation says so explicitly. If the description for a particular option does not mention a source language, you can use that option with all supported languages. The gcc program accepts options and file names as operands. Many options have multi-letter names; therefore multiple single-letter options may not be grouped: -dr is very different from -d -r. You can mix options and other arguments. For the most part, the order you use doesn't matter. Order does matter when you use several options of the same kind; for example, if you specify -L more than once, the directories are searched in the order specified. Many options have long names starting with -f or with -W---for example, -fforce-mem, -fstrength-reduce, -Wformat and so on. Most of these have both positive and negative forms; the negative form of -ffoo would be -fno-foo. This manual documents only one of these two forms, whichever one is not the default.
OPTIONS
Option Summary Here is a summary of all the options, grouped by type. Explanations are in the following sections. Overall Options -c -S -E -o file -pipe -pass-exit-codes -x language -v -### --help --target-help --version C Language Options -ansi -std=standard -aux-info filename -fno-asm -fno-builtin -fno-builtin-function -fhosted -ffreestanding -fms-extensions -trigraphs -no-integrated-cpp -traditional -traditional-cpp -fallow-single-precision -fcond-mismatch -fsigned-bitfields -fsigned-char -funsigned-bitfields -funsigned-char -fwritable- strings C++ Language Options -fabi-version=n -fno-access-control -fcheck-new -fconserve-space -fno-const-strings -fdollars-in-identifiers -fno-elide-construc- tors -fno-enforce-eh-specs -fexternal-templates -falt-external- templates -ffor-scope -fno-for-scope -fno-gnu-keywords -fno- implicit-templates -fno-implicit-inline-templates -fno-implement- inlines -fms-extensions -fno-nonansi-builtins -fno-operator-names -fno-optional-diags -fpermissive -frepo -fno-rtti -fstats -ftemplate-depth-n -fuse-cxa-atexit -fvtable-gc -fno-weak -nost- dinc++ -fno-default-inline -Wabi -Wctor-dtor-privacy -Wnon-vir- tual-dtor -Wreorder -Weffc++ -Wno-deprecated -Wno-non-template- friend -Wold-style-cast -Woverloaded-virtual -Wno-pmf-conversions -Wsign-promo -Wsynth Objective-C Language Options -fconstant-string-class=class-name -fgnu-runtime -fnext-runtime -gen-decls -Wno-protocol -Wselector -Wundeclared-selector Language Independent Options -fmessage-length=n -fdiagnostics-show-location=[once|every-line] Warning Options -fsyntax-only -pedantic -pedantic-errors -w -W -Wall -Waggre- gate-return -Wcast-align -Wcast-qual -Wchar-subscripts -Wcomment -Wconversion -Wno-deprecated-declarations -Wdisabled-optimization -Wno-div-by-zero -Werror -Wfloat-equal -Wformat -Wformat=2 -Wformat-nonliteral -Wformat-security -Wimplicit -Wimplicit-int -Wimplicit-function-declaration -Werror-implicit-function-declara- tion -Wimport -Winline -Wno-endif-labels -Wlarger-than-len -Wlong-long -Wmain -Wmissing-braces -Wmissing-format-attribute -Wmissing-noreturn -Wno-multichar -Wno-format-extra-args -Wno- format-y2k -Wno-import -Wnonnull -Wpacked -Wpadded -Wparentheses -Wpointer-arith -Wredundant-decls -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wstrict-aliasing -Wswitch -Wswitch- default -Wswitch-enum -Wsystem-headers -Wtrigraphs -Wundef -Wuninitialized -Wunknown-pragmas -Wunreachable-code -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused- value -Wunused-variable -Wwrite-strings C-only Warning Options -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wstrict-prototypes -Wtraditional Debugging Options -dletters -dumpspecs -dumpmachine -dumpversion -fdump-unnumbered -fdump-translation-unit[-n] -fdump-class-hierarchy[-n] -fdump-tree- original[-n] -fdump-tree-optimized[-n] -fdump-tree-inlined[-n] -feliminate-dwarf2-dups -fmem-report -fprofile-arcs -frandom- seed=n -fsched-verbose=n -ftest-coverage -ftime-report -g -glevel -gcoff -gdwarf -gdwarf-1 -gdwarf-1+ -gdwarf-2 -ggdb -gstabs -gstabs+ -gvms -gxcoff -gxcoff+ -p -pg -print-file- name=library -print-libgcc-file-name -print-multi-directory -print-multi-lib -print-prog-name=program -print-search-dirs -Q -save-temps -time Optimization Options -falign-functions=n -falign-jumps=n -falign-labels=n -falign- loops=n -fbranch-probabilities -fcaller-saves -fcprop-registers -fcse-follow-jumps -fcse-skip-blocks -fdata-sections -fdelayed- branch -fdelete-null-pointer-checks -fexpensive-optimizations -ffast-math -ffloat-store -fforce-addr -fforce-mem -ffunction- sections -fgcse -fgcse-lm -fgcse-sm -floop-optimize -fcrossjumping -fif-conversion -fif-conversion2 -finline-functions -finline-limit=n -fkeep-inline-functions -fkeep-static-consts -fmerge-constants -fmerge-all-constants -fmove-all-movables -fnew-ra -fno-branch-count-reg -fno-default-inline -fno-defer-pop -fno-function-cse -fno-guess-branch-probability -fno-inline -fno- math-errno -fno-peephole -fno-peephole2 -funsafe-math-optimiza- tions -ffinite-math-only -fno-trapping-math -fno-zero-initial- ized-in-bss -fomit-frame-pointer -foptimize-register-move -fopti- mize-sibling-calls -fprefetch-loop-arrays -freduce-all-givs -fregmove -frename-registers -freorder-blocks -freorder-functions -frerun-cse-after-loop -frerun-loop-opt -fschedule-insns -fsched- ule-insns2 -fno-sched-interblock -fno-sched-spec -fsched-spec- load -fsched-spec-load-dangerous -fsignaling-nans -fsingle-preci- sion-constant -fssa -fssa-ccp -fssa-dce -fstrength-reduce -fstrict-aliasing -ftracer -fthread-jumps -funroll-all-loops -funroll-loops --param name=value -O -O0 -O1 -O2 -O3 -Os Preprocessor Options -$ -Aquestion=answer -A-question[=answer] -C -dD -dI -dM -dN -Dmacro[=defn] -E -H -idirafter dir -include file -imacros file -iprefix file -iwithprefix dir -iwithprefixbefore dir -isystem dir -M -MM -MF -MG -MP -MQ -MT -nostdinc -P -remap -tri- graphs -undef -Umacro -Wp,option Assembler Option -Wa,option Linker Options object-file-name -llibrary -nostartfiles -nodefaultlibs -nost- dlib -s -static -static-libgcc -shared -shared-libgcc -sym- bolic -Wl,option -Xlinker option -u symbol Directory Options -Bprefix -Idir -I- -Ldir -specs=file Target Options -V version -b machine Machine Dependent Options M680x0 Options -m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 -m68060 -mcpu32 -m5200 -m68881 -mbitfield -mc68000 -mc68020 -mfpa -mnobitfield -mrtd -mshort -msoft-float -mpcrel -malign-int -mstrict-align M68hc1x Options -m6811 -m6812 -m68hc11 -m68hc12 -m68hcs12 -mauto-incdec -minmax -mlong-calls -mshort -msoft-reg- count=count VAX Options -mg -mgnu -munix SPARC Options -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -m32 -m64 -mapp-regs -mbroken-saverestore -mcypress -mfaster- structs -mflat -mfpu -mhard-float -mhard-quad-float -mimpure- text -mlittle-endian -mlive-g0 -mno-app-regs -mno-faster-structs -mno-flat -mno-fpu -mno-impure-text -mno-stack-bias -mno- unaligned-doubles -msoft-float -msoft-quad-float -msparclite -mstack-bias -msupersparc -munaligned-doubles -mv8 ARM Options -mapcs-frame -mno-apcs-frame -mapcs-26 -mapcs-32 -mapcs-stack-check -mno-apcs-stack-check -mapcs-float -mno-apcs- float -mapcs-reentrant -mno-apcs-reentrant -msched-prolog -mno- sched-prolog -mlittle-endian -mbig-endian -mwords-little-endian -malignment-traps -mno-alignment-traps -msoft-float -mhard-float -mfpe -mthumb-interwork -mno-thumb-interwork -mcpu=name -march=name -mfpe=name -mstructure-size-boundary=n -mabort-on- noreturn -mlong-calls -mno-long-calls -msingle-pic-base -mno-sin- gle-pic-base -mpic-register=reg -mnop-fun-dllimport -mpoke-func- tion-name -mthumb -marm -mtpcs-frame -mtpcs-leaf-frame -mcaller- super-interworking -mcallee-super-interworking MN10200 Options -mrelax MN10300 Options -mmult-bug -mno-mult-bug -mam33 -mno-am33 -mno- crt0 -mrelax M32R/D Options -m32rx -m32r -mcode-model=model-type -msdata=sdata-type -G num M88K Options -m88000 -m88100 -m88110 -mbig-pic -mcheck-zero- division -mhandle-large-shift -midentify-revision -mno-check- zero-division -mno-ocs-debug-info -mno-ocs-frame-position -mno- optimize-arg-area -mno-serialize-volatile -mno-underscores -mocs- debug-info -mocs-frame-position -moptimize-arg-area -mserialize- volatile -mshort-data-num -msvr3 -msvr4 -mtrap-large-shift -muse-div-instruction -mversion-03.00 -mwarn-passed-structs RS/6000 and PowerPC Options -mcpu=cpu-type -mtune=cpu-type -mpower -mno-power -mpower2 -mno-power2 -mpowerpc -mpowerpc64 -mno-pow- erpc -maltivec -mno-altivec -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mnew-mnemonics -mold- mnemonics -mfull-toc -mminimal-toc -mno-fp-in-toc -mno-sum-in- toc -m64 -m32 -mxl-call -mno-xl-call -mpe -msoft-float -mhard- float -mmultiple -mno-multiple -mstring -mno-string -mupdate -mno-update -mfused-madd -mno-fused-madd -mbit-align -mno-bit- align -mstrict-align -mno-strict-align -mrelocatable -mno-relo- catable -mrelocatable-lib -mno-relocatable-lib -mtoc -mno-toc -mlittle -mlittle-endian -mbig -mbig-endian -mcall-aix -mcall- sysv -mcall-netbsd -maix-struct-return -msvr4-struct-return -mabi=altivec -mabi=no-altivec -mabi=spe -mabi=no-spe -misel=yes -misel=no -mprototype -mno-prototype -msim -mmvme -mads -myel- lowknife -memb -msdata -msdata=opt -mvxworks -mwindiss -G num -pthread Darwin Options -all_load -allowable_client -arch -arch_errors_fatal -arch_only -bind_at_load -bundle -bundle_loader -client_name -compatibil- ity_version -current_version -dependency-file -dylib_file -dylinker_install_name -dynamic -dynamiclib -exported_symbols_list -filelist -flat_namespace -force_cpusubtype_ALL -force_flat_names- pace -headerpad_max_install_names -image_base -init -install_name -keep_private_externs -multi_module -multiply_defined -multi- ply_defined_unused -noall_load -nomultidefs -noprebind -noseglinkedit -pagezero_size -prebind -prebind_all_twolevel_mod- ules -private_bundle -read_only_relocs -sectalign -sectobjectsym- bols -whyload -seg1addr -sectcreate -sectobjectsymbols -sectorder -seg_addr_table -seg_addr_table_filename -seglinkedit -segprot -segs_read_only_addr -segs_read_write_addr -single_module -static -sub_library -sub_umbrella -twolevel_namespace -umbrella -undefined -unexported_symbols_list -weak_reference_mismatches -whatsloaded RT Options -mcall-lib-mul -mfp-arg-in-fpregs -mfp-arg-in-gregs -mfull-fp-blocks -mhc-struct-return -min-line-mul -mminimum-fp- blocks -mnohc-struct-return MIPS Options -mabicalls -march=cpu-type -mtune=cpu=type -mcpu=cpu-type -membedded-data -muninit-const-in-rodata -membed- ded-pic -mfp32 -mfp64 -mfused-madd -mno-fused-madd -mgas -mgp32 -mgp64 -mgpopt -mhalf-pic -mhard-float -mint64 -mips1 -mips2 -mips3 -mips4 -mlong64 -mlong32 -mlong-calls -mmemcpy -mmips-as -mmips-tfile -mno-abicalls -mno-embedded-data -mno- uninit-const-in-rodata -mno-embedded-pic -mno-gpopt -mno-long- calls -mno-memcpy -mno-mips-tfile -mno-rnames -mno-stats -mrnames -msoft-float -m4650 -msingle-float -mmad -mstats -EL -EB -G num -nocpp -mabi=32 -mabi=n32 -mabi=64 -mabi=eabi -mfix7000 -mno-crt0 -mflush-func=func -mno-flush-func -mbranch- likely -mno-branch-likely i386 and x86-64 Options -mcpu=cpu-type -march=cpu-type -mfp- math=unit -masm=dialect -mno-fancy-math-387 -mno-fp-ret-in-387 -msoft-float -msvr3-shlib -mno-wide-multiply -mrtd -malign-dou- ble -mpreferred-stack-boundary=num -mmmx -msse -msse2 -msse3 -m3dnow -mthreads -mno-align-stringops -minline-all-stringops -mpush-args -maccumulate-outgoing-args -m128bit-long-double -m96bit-long-double -mregparm=num -momit-leaf-frame-pointer -mno- red-zone -mcmodel=code-model -m32 -m64 HPPA Options -march=architecture-type -mbig-switch -mdisable- fpregs -mdisable-indexing -mfast-indirect-calls -mgas -mgnu-ld -mhp-ld -mjump-in-delay -mlinker-opt -mlong-calls -mlong-load- store -mno-big-switch -mno-disable-fpregs -mno-disable-indexing -mno-fast-indirect-calls -mno-gas -mno-jump-in-delay -mno-long- load-store -mno-portable-runtime -mno-soft-float -mno-space-regs -msoft-float -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 -mportable-runtime -mschedule=cpu-type -mspace-regs -msio -mwsio -nolibdld -static -threads Intel 960 Options -mcpu-type -masm-compat -mclean-linkage -mcode- align -mcomplex-addr -mleaf-procedures -mic-compat -mic2.0-com- pat -mic3.0-compat -mintel-asm -mno-clean-linkage -mno-code- align -mno-complex-addr -mno-leaf-procedures -mno-old-align -mno- strict-align -mno-tail-call -mnumerics -mold-align -msoft-float -mstrict-align -mtail-call DEC Alpha Options -mno-fp-regs -msoft-float -malpha-as -mgas -mieee -mieee-with-inexact -mieee-conformant -mfp-trap-mode=mode -mfp-rounding-mode=mode -mtrap-precision=mode -mbuild-constants -mcpu=cpu-type -mtune=cpu-type -mbwx -mmax -mfix -mcix -mfloat- vax -mfloat-ieee -mexplicit-relocs -msmall-data -mlarge-data -mmemory-latency=time DEC Alpha/VMS Options -mvms-return-codes H8/300 Options -mrelax -mh -ms -mn -mint32 -malign-300 SH Options -m1 -m2 -m3 -m3e -m4-nofpu -m4-single-only -m4-sin- gle -m4 -m5-64media -m5-64media-nofpu -m5-32media -m5-32media- nofpu -m5-compact -m5-compact-nofpu -mb -ml -mdalign -mrelax -mbigtable -mfmovd -mhitachi -mnomacsave -mieee -misize -mpad- struct -mspace -mprefergot -musermode System V Options -Qy -Qn -YP,paths -Ym,dir ARC Options -EB -EL -mmangle-cpu -mcpu=cpu -mtext=text-section -mdata=data-section -mrodata=readonly-data-section TMS320C3x/C4x Options -mcpu=cpu -mbig -msmall -mregparm -mmem- parm -mfast-fix -mmpyi -mbk -mti -mdp-isr-reload -mrpts=count -mrptb -mdb -mloop-unsigned -mparallel-insns -mparallel-mpy -mpreserve-float V850 Options -mlong-calls -mno-long-calls -mep -mno-ep -mprolog- function -mno-prolog-function -mspace -mtda=n -msda=n -mzda=n -mapp-regs -mno-app-regs -mdisable-callt -mno-disable-callt -mv850e -mv850 -mbig-switch NS32K Options -m32032 -m32332 -m32532 -m32081 -m32381 -mmult- add -mnomult-add -msoft-float -mrtd -mnortd -mregparam -mnoregparam -msb -mnosb -mbitfield -mnobitfield -mhimem -mno- himem AVR Options -mmcu=mcu -msize -minit-stack=n -mno-interrupts -mcall-prologues -mno-tablejump -mtiny-stack MCore Options -mhardlit -mno-hardlit -mdiv -mno-div -mrelax- immediates -mno-relax-immediates -mwide-bitfields -mno-wide-bit- fields -m4byte-functions -mno-4byte-functions -mcallgraph-data -mno-callgraph-data -mslow-bytes -mno-slow-bytes -mno-lsim -mlittle-endian -mbig-endian -m210 -m340 -mstack-increment MMIX Options -mlibfuncs -mno-libfuncs -mepsilon -mno-epsilon -mabi=gnu -mabi=mmixware -mzero-extend -mknuthdiv -mtoplevel- symbols -melf -mbranch-predict -mno-branch-predict -mbase- addresses -mno-base-addresses -msingle-exit -mno-single-exit IA-64 Options -mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic -mvolatile-asm-stop -mb-step -mregister-names -mno- sdata -mconstant-gp -mauto-pic -minline-float-divide-min-latency -minline-float-divide-max-throughput -minline-int-divide-min- latency -minline-int-divide-max-throughput -mno-dwarf2-asm -mfixed-range=register-range D30V Options -mextmem -mextmemory -monchip -mno-asm-optimize -masm-optimize -mbranch-cost=n -mcond-exec=n S/390 and zSeries Options -mhard-float -msoft-float -mbackchain -mno-backchain -msmall-exec -mno-small-exec -mmvcle -mno-mvcle -m64 -m31 -mdebug -mno-debug CRIS Options -mcpu=cpu -march=cpu -mtune=cpu -mmax-stack-frame=n -melinux-stacksize=n -metrax4 -metrax100 -mpdebug -mcc-init -mno-side-effects -mstack-align -mdata-align -mconst-align -m32-bit -m16-bit -m8-bit -mno-prologue-epilogue -mno-gotplt -melf -maout -melinux -mlinux -sim -sim2 PDP-11 Options -mfpu -msoft-float -mac0 -mno-ac0 -m40 -m45 -m10 -mbcopy -mbcopy-builtin -mint32 -mno-int16 -mint16 -mno- int32 -mfloat32 -mno-float64 -mfloat64 -mno-float32 -mabshi -mno-abshi -mbranch-expensive -mbranch-cheap -msplit -mno-split -munix-asm -mdec-asm Xstormy16 Options -msim Xtensa Options -mbig-endian -mlittle-endian -mdensity -mno-den- sity -mmac16 -mno-mac16 -mmul16 -mno-mul16 -mmul32 -mno-mul32 -mnsa -mno-nsa -mminmax -mno-minmax -msext -mno-sext -mbooleans -mno-booleans -mhard-float -msoft-float -mfused-madd -mno-fused- madd -mserialize-volatile -mno-serialize-volatile -mtext-section- literals -mno-text-section-literals -mtarget-align -mno-target- align -mlongcalls -mno-longcalls FRV Options -mgpr-32 -mgpr-64 -mfpr-32 -mfpr-64 -mhard-float -msoft-float -malloc-cc -mfixed-cc -mdword -mno-dword -mdouble -mno-double -mmedia -mno-media -mmuladd -mno-muladd -mlibrary- pic -macc-4 -macc-8 -mpack -mno-pack -mno-eflags -mcond-move -mno-cond-move -mscc -mno-scc -mcond-exec -mno-cond-exec -mvliw- branch -mno-vliw-branch -mmulti-cond-exec -mno-multi-cond-exec -mnested-cond-exec -mno-nested-cond-exec -mtomcat-stats -mcpu=cpu Code Generation Options -fcall-saved-reg -fcall-used-reg -ffixed-reg -fexceptions -fnon- call-exceptions -funwind-tables -fasynchronous-unwind-tables -fin- hibit-size-directive -finstrument-functions -fno-common -fno- ident -fno-gnu-linker -fpcc-struct-return -fpic -fPIC -freg- struct-return -fshared-data -fshort-enums -fshort-double -fshort-wchar -fvolatile -fvolatile-global -fvolatile-static -fverbose-asm -fpack-struct -fstack-check -fstack-limit-regis- ter=reg -fstack-limit-symbol=sym -fargument-alias -fargument- noalias -fargument-noalias-global -fleading-underscore -ftls- model=model -ftrapv -fbounds-check Options Controlling the Kind of Output Compilation can involve up to four stages: preprocessing, compilation proper, assembly and linking, always in that order. The first three stages apply to an individual source file, and end by producing an object file; linking combines all the object files (those newly com- piled, and those specified as input) into an executable file. For any given input file, the file name suffix determines what kind of compilation is done: file.c C source code which must be preprocessed. file.i C source code which should not be preprocessed. file.ii C++ source code which should not be preprocessed. file.m Objective-C source code. Note that you must link with the library libobjc.a to make an Objective-C program work. file.mi Objective-C source code which should not be preprocessed. file.h C header file (not to be compiled or linked). file.cc file.cp file.cxx file.cpp file.c++ file.C C++ source code which must be preprocessed. Note that in .cxx, the last two letters must both be literally x. Likewise, .C refers to a literal capital C. file.f file.for file.FOR Fortran source code which should not be preprocessed. file.F file.fpp file.FPP Fortran source code which must be preprocessed (with the tradi- tional preprocessor). file.r Fortran source code which must be preprocessed with a RATFOR pre- processor (not included with GCC). file.ads Ada source code file which contains a library unit declaration (a declaration of a package, subprogram, or generic, or a generic instantiation), or a library unit renaming declaration (a package, generic, or subprogram renaming declaration). Such files are also called specs. file.adb Ada source code file containing a library unit body (a subprogram or package body). Such files are also called bodies. file.s Assembler code. file.S Assembler code which must be preprocessed. other An object file to be fed straight into linking. Any file name with no recognized suffix is treated this way. You can specify the input language explicitly with the -x option: -x language Specify explicitly the language for the following input files (rather than letting the compiler choose a default based on the file name suffix). This option applies to all following input files until the next -x option. Possible values for language are: c c-header cpp-output c++ c++-cpp-output objective-c objc-cpp-output assembler assembler-with-cpp ada f77 f77-cpp-input ratfor java treelang -x none Turn off any specification of a language, so that subsequent files are handled according to their file name suffixes (as they are if -x has not been used at all). -pass-exit-codes Normally the gcc program will exit with the code of 1 if any phase of the compiler returns a non-success return code. If you specify -pass-exit-codes, the gcc program will instead return with numeri- cally highest error produced by any phase that returned an error indication. If you only want some of the stages of compilation, you can use -x (or filename suffixes) to tell gcc where to start, and one of the options -c, -S, or -E to say where gcc is to stop. Note that some combinations (for example, -x cpp-output -E) instruct gcc to do nothing at all. -c Compile or assemble the source files, but do not link. The linking stage simply is not done. The ultimate output is in the form of an object file for each source file. By default, the object file name for a source file is made by replacing the suffix .c, .i, .s, etc., with .o. Unrecognized input files, not requiring compilation or assembly, are ignored. -S Stop after the stage of compilation proper; do not assemble. The output is in the form of an assembler code file for each non-assem- bler input file specified. By default, the assembler file name for a source file is made by replacing the suffix .c, .i, etc., with .s. Input files that don't require compilation are ignored. -E Stop after the preprocessing stage; do not run the compiler proper. The output is in the form of preprocessed source code, which is sent to the standard output. Input files which don't require preprocessing are ignored. -o file Place output in file file. This applies regardless to whatever sort of output is being produced, whether it be an executable file, an object file, an assembler file or preprocessed C code. Since only one output file can be specified, it does not make sense to use -o when compiling more than one input file, unless you are producing an executable file as output. If -o is not specified, the default is to put an executable file in a.out, the object file for source.suffix in source.o, its assembler file in source.s, and all preprocessed C source on standard output. -v Print (on standard error output) the commands executed to run the stages of compilation. Also print the version number of the com- piler driver program and of the preprocessor and the compiler proper. -### Like -v except the commands are not executed and all command argu- ments are quoted. This is useful for shell scripts to capture the driver-generated command lines. -pipe Use pipes rather than temporary files for communication between the various stages of compilation. This fails to work on some systems where the assembler is unable to read from a pipe; but the GNU assembler has no trouble. --help Print (on the standard output) a description of the command line options understood by gcc. If the -v option is also specified then --help will also be passed on to the various processes invoked by gcc, so that they can display the command line options they accept. If the -W option is also specified then command line options which have no documentation associated with them will also be displayed. --target-help Print (on the standard output) a description of target specific command line options for each tool. --version Display the version number and copyrights of the invoked GCC. Compiling C++ Programs C++ source files conventionally use one of the suffixes .C, .cc, .cpp, .c++, .cp, or .cxx; preprocessed C++ files use the suffix .ii. GCC recognizes files with these names and compiles them as C++ programs even if you call the compiler the same way as for compiling C programs (usually with the name gcc). However, C++ programs often require class libraries as well as a com- piler that understands the C++ language---and under some circumstances, you might want to compile programs from standard input, or otherwise without a suffix that flags them as C++ programs. g++ is a program that calls GCC with the default language set to C++, and automatically specifies linking against the C++ library. On many systems, g++ is also installed with the name c++. When you compile C++ programs, you may specify many of the same com- mand-line options that you use for compiling programs in any language; or command-line options meaningful for C and related languages; or options that are meaningful only for C++ programs. Options Controlling C Dialect The following options control the dialect of C (or languages derived from C, such as C++ and Objective-C) that the compiler accepts: -ansi In C mode, support all ISO C90 programs. In C++ mode, remove GNU extensions that conflict with ISO C++. This turns off certain features of GCC that are incompatible with ISO C90 (when compiling C code), or of standard C++ (when compiling C++ code), such as the "asm" and "typeof" keywords, and predefined macros such as "unix" and "vax" that identify the type of system you are using. It also enables the undesirable and rarely used ISO trigraph feature. For the C compiler, it disables recognition of C++ style // comments as well as the "inline" keyword. The alternate keywords "__asm__", "__extension__", "__inline__" and "__typeof__" continue to work despite -ansi. You would not want to use them in an ISO C program, of course, but it is useful to put them in header files that might be included in compilations done with -ansi. Alternate predefined macros such as "__unix__" and "__vax__" are also available, with or without -ansi. The -ansi option does not cause non-ISO programs to be rejected gratuitously. For that, -pedantic is required in addition to -ansi. The macro "__STRICT_ANSI__" is predefined when the -ansi option is used. Some header files may notice this macro and refrain from declaring certain functions or defining certain macros that the ISO standard doesn't call for; this is to avoid interfering with any programs that might use these names for other things. Functions which would normally be built in but do not have seman- tics defined by ISO C (such as "alloca" and "ffs") are not built-in functions with -ansi is used. -std= Determine the language standard. This option is currently only supported when compiling C or C++. A value for this option must be provided; possible values are c89 iso9899:1990 ISO C90 (same as -ansi). iso9899:199409 ISO C90 as modified in amendment 1. c99 c9x iso9899:1999 iso9899:199x ISO C99. Note that this standard is not yet fully supported; see <http://gcc.gnu.org/gcc-3.3/c99status.html> for more infor- mation. The names c9x and iso9899:199x are deprecated. gnu89 Default, ISO C90 plus GNU extensions (including some C99 fea- tures). gnu99 gnu9x ISO C99 plus GNU extensions. When ISO C99 is fully implemented in GCC, this will become the default. The name gnu9x is depre- cated. c++98 The 1998 ISO C++ standard plus amendments. gnu++98 The same as -std=c++98 plus GNU extensions. This is the default for C++ code. Even when this option is not specified, you can still use some of the features of newer standards in so far as they do not conflict with previous C standards. For example, you may use "__restrict__" even when -std=c99 is not specified. The -std options specifying some version of ISO C have the same effects as -ansi, except that features that were not in ISO C90 but are in the specified version (for example, // comments and the "inline" keyword in ISO C99) are not disabled. -aux-info filename Output to the given filename prototyped declarations for all func- tions declared and/or defined in a translation unit, including those in header files. This option is silently ignored in any lan- guage other than C. Besides declarations, the file indicates, in comments, the origin of each declaration (source file and line), whether the declaration was implicit, prototyped or unprototyped (I, N for new or O for old, respectively, in the first character after the line number and the colon), and whether it came from a declaration or a definition (C or F, respectively, in the following character). In the case of function definitions, a K&R-style list of arguments followed by their declarations is also provided, inside comments, after the declaration. -fno-asm Do not recognize "asm", "inline" or "typeof" as a keyword, so that code can use these words as identifiers. You can use the keywords "__asm__", "__inline__" and "__typeof__" instead. -ansi implies -fno-asm. In C++, this switch only affects the "typeof" keyword, since "asm" and "inline" are standard keywords. You may want to use the -fno- gnu-keywords flag instead, which has the same effect. In C99 mode (-std=c99 or -std=gnu99), this switch only affects the "asm" and "typeof" keywords, since "inline" is a standard keyword in ISO C99. -fno-builtin -fno-builtin-function Don't recognize built-in functions that do not begin with __builtin_ as prefix. GCC normally generates special code to handle certain built-in functions more efficiently; for instance, calls to "alloca" may become single instructions that adjust the stack directly, and calls to "memcpy" may become inline copy loops. The resulting code is often both smaller and faster, but since the function calls no longer appear as such, you cannot set a breakpoint on those calls, nor can you change the behavior of the functions by linking with a different library. With the -fno-builtin-function option only the built-in function function is disabled. function must not begin with __builtin_. If a function is named this is not built-in in this version of GCC, this option is ignored. There is no corresponding -fbuiltin-func- tion option; if you wish to enable built-in functions selectively when using -fno-builtin or -ffreestanding, you may define macros such as: #define abs(n) __builtin_abs ((n)) #define strcpy(d, s) __builtin_strcpy ((d), (s)) -fhosted Assert that compilation takes place in a hosted environment. This implies -fbuiltin. A hosted environment is one in which the entire standard library is available, and in which "main" has a return type of "int". Examples are nearly everything except a kernel. This is equivalent to -fno-freestanding. -ffreestanding Assert that compilation takes place in a freestanding environment. This implies -fno-builtin. A freestanding environment is one in which the standard library may not exist, and program startup may not necessarily be at "main". The most obvious example is an OS kernel. This is equivalent to -fno-hosted. -fms-extensions Accept some non-standard constructs used in Microsoft header files. -trigraphs Support ISO C trigraphs. The -ansi option (and -std options for strict ISO C conformance) implies -trigraphs. -no-integrated-cpp Performs a compilation in two passes: preprocessing and compiling. This option allows a user supplied "cc1", "cc1plus", or "cc1obj" via the -B option. The user supplied compilation step can then add in an additional preprocessing step after normal preprocessing but before compiling. The default is to use the integrated cpp (inter- nal cpp) The semantics of this option will change if "cc1", "cc1plus", and "cc1obj" are merged. -traditional -traditional-cpp Formerly, these options caused GCC to attempt to emulate a pre- standard C compiler. They are now only supported with the -E switch. The preprocessor continues to support a pre-standard mode. See the GNU CPP manual for details. -fcond-mismatch Allow conditional expressions with mismatched types in the second and third arguments. The value of such an expression is void. This option is not supported for C++. -funsigned-char Let the type "char" be unsigned, like "unsigned char". Each kind of machine has a default for what "char" should be. It is either like "unsigned char" by default or like "signed char" by default. Ideally, a portable program should always use "signed char" or "unsigned char" when it depends on the signedness of an object. But many programs have been written to use plain "char" and expect it to be signed, or expect it to be unsigned, depending on the machines they were written for. This option, and its inverse, let you make such a program work with the opposite default. The type "char" is always a distinct type from each of "signed char" or "unsigned char", even though its behavior is always just like one of those two. -fsigned-char Let the type "char" be signed, like "signed char". Note that this is equivalent to -fno-unsigned-char, which is the negative form of -funsigned-char. Likewise, the option -fno- signed-char is equivalent to -funsigned-char. -fsigned-bitfields -funsigned-bitfields -fno-signed-bitfields -fno-unsigned-bitfields These options control whether a bit-field is signed or unsigned, when the declaration does not use either "signed" or "unsigned". By default, such a bit-field is signed, because this is consistent: the basic integer types such as "int" are signed types. -fwritable-strings Store string constants in the writable data segment and don't uniquize them. This is for compatibility with old programs which assume they can write into string constants. Writing into string constants is a very bad idea; ``constants'' should be constant. Options Controlling C++ Dialect This section describes the command-line options that are only meaning- ful for C++ programs; but you can also use most of the GNU compiler options regardless of what language your program is in. For example, you might compile a file "firstClass.C" like this: g++ -g -frepo -O -c firstClass.C In this example, only -frepo is an option meant only for C++ programs; you can use the other options with any language supported by GCC. Here is a list of options that are only for compiling C++ programs: -fabi-version=n Use version n of the C++ ABI. Version 1 is the version of the C++ ABI that first appeared in G++ 3.2. Version 0 will always be the version that conforms most closely to the C++ ABI specification. Therefore, the ABI obtained using version 0 will change as ABI bugs are fixed. The default is version 1. -fno-access-control Turn off all access checking. This switch is mainly useful for working around bugs in the access control code. -fcheck-new Check that the pointer returned by "operator new" is non-null before attempting to modify the storage allocated. This check is normally unnecessary because the C++ standard specifies that "oper- ator new" will only return "0" if it is declared throw(), in which case the compiler will always check the return value even without this option. In all other cases, when "operator new" has a non- empty exception specification, memory exhaustion is signalled by throwing "std::bad_alloc". See also new (nothrow). -fconserve-space Put uninitialized or runtime-initialized global variables into the common segment, as C does. This saves space in the executable at the cost of not diagnosing duplicate definitions. If you compile with this flag and your program mysteriously crashes after "main()" has completed, you may have an object that is being destroyed twice because two definitions were merged. This option is no longer useful on most targets, now that support has been added for putting variables into BSS without making them common. -fno-const-strings Give string constants type "char *" instead of type "const char *". By default, G++ uses type "const char *" as required by the stan- dard. Even if you use -fno-const-strings, you cannot actually mod- ify the value of a string constant, unless you also use -fwritable- strings. This option might be removed in a future release of G++. For maxi- mum portability, you should structure your code so that it works with string constants that have type "const char *". -fdollars-in-identifiers Accept $ in identifiers. You can also explicitly prohibit use of $ with the option -fno-dollars-in-identifiers. (GNU C allows $ by default on most target systems, but there are a few exceptions.) Traditional C allowed the character $ to form part of identifiers. However, ISO C and C++ forbid $ in identifiers. -fno-elide-constructors The C++ standard allows an implementation to omit creating a tempo- rary which is only used to initialize another object of the same type. Specifying this option disables that optimization, and forces G++ to call the copy constructor in all cases. -fno-enforce-eh-specs Don't check for violation of exception specifications at runtime. This option violates the C++ standard, but may be useful for reduc- ing code size in production builds, much like defining NDEBUG. The compiler will still optimize based on the exception specifications. -fexternal-templates Cause #pragma interface and implementation to apply to template instantiation; template instances are emitted or not according to the location of the template definition. This option is deprecated. -falt-external-templates Similar to -fexternal-templates, but template instances are emitted or not according to the place where they are first instantiated. This option is deprecated. -ffor-scope -fno-for-scope If -ffor-scope is specified, the scope of variables declared in a for-init-statement is limited to the for loop itself, as specified by the C++ standard. If -fno-for-scope is specified, the scope of variables declared in a for-init-statement extends to the end of the enclosing scope, as was the case in old versions of G++, and other (traditional) implementations of C++. The default if neither flag is given to follow the standard, but to allow and give a warning for old-style code that would otherwise be invalid, or have different behavior. -fno-gnu-keywords Do not recognize "typeof" as a keyword, so that code can use this word as an identifier. You can use the keyword "__typeof__" instead. -ansi implies -fno-gnu-keywords. -fno-implicit-templates Never emit code for non-inline templates which are instantiated implicitly (i.e. by use); only emit code for explicit instantia- tions. -fno-implicit-inline-templates Don't emit code for implicit instantiations of inline templates, either. The default is to handle inlines differently so that com- piles with and without optimization will need the same set of explicit instantiations. -fno-implement-inlines To save space, do not emit out-of-line copies of inline functions controlled by #pragma implementation. This will cause linker errors if these functions are not inlined everywhere they are called. -fms-extensions Disable pedantic warnings about constructs used in MFC, such as implicit int and getting a pointer to member function via non-stan- dard syntax. -fno-nonansi-builtins Disable built-in declarations of functions that are not mandated by ANSI/ISO C. These include "ffs", "alloca", "_exit", "index", "bzero", "conjf", and other related functions. -fno-operator-names Do not treat the operator name keywords "and", "bitand", "bitor", "compl", "not", "or" and "xor" as synonyms as keywords. -fno-optional-diags Disable diagnostics that the standard says a compiler does not need to issue. Currently, the only such diagnostic issued by G++ is the one for a name having multiple meanings within a class. -fpermissive Downgrade some diagnostics about nonconformant code from errors to warnings. Thus, using -fpermissive will allow some nonconforming code to compile. -frepo Enable automatic template instantiation at link time. This option also implies -fno-implicit-templates. -fno-rtti Disable generation of information about every class with virtual functions for use by the C++ runtime type identification features (dynamic_cast and typeid). If you don't use those parts of the language, you can save some space by using this flag. Note that exception handling uses the same information, but it will generate it as needed. -fstats Emit statistics about front-end processing at the end of the compi- lation. This information is generally only useful to the G++ development team. -ftemplate-depth-n Set the maximum instantiation depth for template classes to n. A limit on the template instantiation depth is needed to detect end- less recursions during template class instantiation. ANSI/ISO C++ conforming programs must not rely on a maximum depth greater than 17. -fuse-cxa-atexit Register destructors for objects with static storage duration with the "__cxa_atexit" function rather than the "atexit" function. This option is required for fully standards-compliant handling of static destructors, but will only work if your C library supports "__cxa_atexit". -fvtable-gc Emit special relocations for vtables and virtual function refer- ences so that the linker can identify unused virtual functions and zero out vtable slots that refer to them. This is most useful with -ffunction-sections and -Wl,--gc-sections, in order to also discard the functions themselves. This optimization requires GNU as and GNU ld. Not all systems sup- port this option. -Wl,--gc-sections is ignored without -static. -fno-weak Do not use weak symbol support, even if it is provided by the linker. By default, G++ will use weak symbols if they are avail- able. This option exists only for testing, and should not be used by end-users; it will result in inferior code and has no benefits. This option may be removed in a future release of G++. -nostdinc++ Do not search for header files in the standard directories specific to C++, but do still search the other standard directories. (This option is used when building the C++ library.) In addition, these optimization, warning, and code generation options have meanings only for C++ programs: -fno-default-inline Do not assume inline for functions defined inside a class scope. Note that these functions will have linkage like inline func- tions; they just won't be inlined by default. -Wabi (C++ only) Warn when G++ generates code that is probably not compatible with the vendor-neutral C++ ABI. Although an effort has been made to warn about all such cases, there are probably some cases that are not warned about, even though G++ is generating incompatible code. There may also be cases where warnings are emitted even though the code that is generated will be compatible. You should rewrite your code to avoid these warnings if you are concerned about the fact that code generated by G++ may not be binary compatible with code generated by other compilers. The known incompatibilities at this point include: · Incorrect handling of tail-padding for bit-fields. G++ may attempt to pack data into the same byte as a base class. For example: struct A { virtual void f(); int f1 : 1; }; struct B : public A { int f2 : 1; }; In this case, G++ will place "B::f2" into the same byte as"A::f1"; other compilers will not. You can avoid this prob- lem by explicitly padding "A" so that its size is a multiple of the byte size on your platform; that will cause G++ and other compilers to layout "B" identically. · Incorrect handling of tail-padding for virtual bases. G++ does not use tail padding when laying out virtual bases. For exam- ple: struct A { virtual void f(); char c1; }; struct B { B(); char c2; }; struct C : public A, public virtual B {}; In this case, G++ will not place "B" into the tail-padding for "A"; other compilers will. You can avoid this problem by explicitly padding "A" so that its size is a multiple of its alignment (ignoring virtual base classes); that will cause G++ and other compilers to layout "C" identically. · Incorrect handling of bit-fields with declared widths greater than that of their underlying types, when the bit-fields appear in a union. For example: union U { int i : 4096; }; Assuming that an "int" does not have 4096 bits, G++ will make the union too small by the number of bits in an "int". · Empty classes can be placed at incorrect offsets. For example: struct A {}; struct B { A a; virtual void f (); }; struct C : public B, public A {}; G++ will place the "A" base class of "C" at a nonzero offset; it should be placed at offset zero. G++ mistakenly believes that the "A" data member of "B" is already at offset zero. · Names of template functions whose types involve "typename" or template template parameters can be mangled incorrectly. template <typename Q> void f(typename Q::X) {} template <template <typename> class Q> void f(typename Q<int>::X) {} Instantiations of these templates may be mangled incorrectly. -Wctor-dtor-privacy (C++ only) Warn when a class seems unusable because all the constructors or destructors in that class are private, and it has neither friends nor public static member functions. This warning is enabled by default. -Wnon-virtual-dtor (C++ only) Warn when a class appears to be polymorphic, thereby requiring a virtual destructor, yet it declares a non-virtual one. This warn- ing is enabled by -Wall. -Wreorder (C++ only) Warn when the order of member initializers given in the code does not match the order in which they must be executed. For instance: struct A { int i; int j; A(): j (0), i (1) { } }; The compiler will rearrange the member initializers for i and j to match the declaration order of the members, emitting a warning to that effect. This warning is enabled by -Wall. The following -W... options are not affected by -Wall. -Weffc++ (C++ only) Warn about violations of the following style guidelines from Scott Meyers' Effective C++ book: · Item 11: Define a copy constructor and an assignment operator for classes with dynamically allocated memory. · Item 12: Prefer initialization to assignment in constructors. · Item 14: Make destructors virtual in base classes. · Item 15: Have "operator=" return a reference to "*this". · Item 23: Don't try to return a reference when you must return an object. Also warn about violations of the following style guidelines from Scott Meyers' More Effective C++ book: · Item 6: Distinguish between prefix and postfix forms of incre- ment and decrement operators. · Item 7: Never overload "&&", "||", or ",". When selecting this option, be aware that the standard library headers do not obey all of these guidelines; use grep -v to filter out those warnings. -Wno-deprecated (C++ only) Do not warn about usage of deprecated features. -Wno-non-template-friend (C++ only) Disable warnings when non-templatized friend functions are declared within a template. Since the advent of explicit template specifi- cation support in G++, if the name of the friend is an unqualified- id (i.e., friend foo(int)), the C++ language specification demands that the friend declare or define an ordinary, nontemplate func- tion. (Section 14.5.3). Before G++ implemented explicit specifi- cation, unqualified-ids could be interpreted as a particular spe- cialization of a templatized function. Because this non-conforming behavior is no longer the default behavior for G++, -Wnon-template- friend allows the compiler to check existing code for potential trouble spots and is on by default. This new compiler behavior can be turned off with -Wno-non-template-friend which keeps the confor- mant compiler code but disables the helpful warning. -Wold-style-cast (C++ only) Warn if an old-style (C-style) cast to a non-void type is used within a C++ program. The new-style casts (static_cast, reinter- pret_cast, and const_cast) are less vulnerable to unintended effects and much easier to search for. -Woverloaded-virtual (C++ only) Warn when a function declaration hides virtual functions from a base class. For example, in: struct A { virtual void f(); }; struct B: public A { void f(int); }; the "A" class version of "f" is hidden in "B", and code like: B* b; b->f(); will fail to compile. -Wno-pmf-conversions (C++ only) Disable the diagnostic for converting a bound pointer to member function to a plain pointer. -Wsign-promo (C++ only) Warn when overload resolution chooses a promotion from unsigned or enumeral type to a signed type, over a conversion to an unsigned type of the same size. Previous versions of G++ would try to pre- serve unsignedness, but the standard mandates the current behavior. -Wsynth (C++ only) Warn when G++'s synthesis behavior does not match that of cfront. For instance: struct A { operator int (); A& operator = (int); }; main () { A a,b; a = b; } In this example, G++ will synthesize a default A& operator = (const A&);, while cfront will use the user-defined operator =. Options Controlling Objective-C Dialect This section describes the command-line options that are only meaning- ful for Objective-C programs, but you can also use most of the GNU com- piler options regardless of what language your program is in. For example, you might compile a file "some_class.m" like this: gcc -g -fgnu-runtime -O -c some_class.m In this example, -fgnu-runtime is an option meant only for Objective-C programs; you can use the other options with any language supported by GCC. Here is a list of options that are only for compiling Objective-C pro- grams: -fconstant-string-class=class-name Use class-name as the name of the class to instantiate for each literal string specified with the syntax "@"..."". The default class name is "NXConstantString". -fgnu-runtime Generate object code compatible with the standard GNU Objective-C runtime. This is the default for most types of systems. -fnext-runtime Generate output compatible with the NeXT runtime. This is the default for NeXT-based systems, including Darwin and Mac OS X. The macro "__NEXT_RUNTIME__" is predefined if (and only if) this option is used. -gen-decls Dump interface declarations for all classes seen in the source file to a file named sourcename.decl. -Wno-protocol If a class is declared to implement a protocol, a warning is issued for every method in the protocol that is not implemented by the class. The default behavior is to issue a warning for every method not explicitly implemented in the class, even if a method implemen- tation is inherited from the superclass. If you use the "-Wno-pro- tocol" option, then methods inherited from the superclass are con- sidered to be implemented, and no warning is issued for them. -Wselector Warn if multiple methods of different types for the same selector are found during compilation. The check is performed on the list of methods in the final stage of compilation. Additionally, a check is performed for each selector appearing in a "@selec- tor(...)" expression, and a corresponding method for that selector has been found during compilation. Because these checks scan the method table only at the end of compilation, these warnings are not produced if the final stage of compilation is not reached, for example because an error is found during compilation, or because the "-fsyntax-only" option is being used. -Wundeclared-selector Warn if a "@selector(...)" expression referring to an undeclared selector is found. A selector is considered undeclared if no method with that name has been declared before the "@selector(...)" expression, either explicitly in an "@interface" or "@protocol" declaration, or implicitly in an "@implementation" section. This option always performs its checks as soon as a "@selector(...)" expression is found, while "-Wselector" only performs its checks in the final stage of compilation. This also enforces the coding style convention that methods and selectors must be declared before being used. Options to Control Diagnostic Messages Formatting Traditionally, diagnostic messages have been formatted irrespective of the output device's aspect (e.g. its width, ...). The options described below can be used to control the diagnostic messages format- ting algorithm, e.g. how many characters per line, how often source location information should be reported. Right now, only the C++ front end can honor these options. However it is expected, in the near future, that the remaining front ends would be able to digest them cor- rectly. -fmessage-length=n Try to format error messages so that they fit on lines of about n characters. The default is 72 characters for g++ and 0 for the rest of the front ends supported by GCC. If n is zero, then no line-wrapping will be done; each error message will appear on a single line. -fdiagnostics-show-location=once Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit once source location information; that is, in case the message is too long to fit on a single physical line and has to be wrapped, the source location won't be emitted (as prefix) again, over and over, in subsequent continuation lines. This is the default behavior. -fdiagnostics-show-location=every-line Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit the same source location information (as prefix) for physical lines that result from the process of breaking a message which is too long to fit on a single line. Options to Request or Suppress Warnings Warnings are diagnostic messages that report constructions which are not inherently erroneous but which are risky or suggest there may have been an error. You can request many specific warnings with options beginning -W, for example -Wimplicit to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning -Wno- to turn off warnings; for example, -Wno-implicit. This manual lists only one of the two forms, whichever is not the default. The following options control the amount and kinds of warnings produced by GCC; for further, language-specific options also refer to @ref{C++ Dialect Options} and @ref{Objective-C Dialect Options}. -fsyntax-only Check the code for syntax errors, but don't do anything beyond that. -pedantic Issue all the warnings demanded by strict ISO C and ISO C++; reject all programs that use forbidden extensions, and some other programs that do not follow ISO C and ISO C++. For ISO C, follows the ver- sion of the ISO C standard specified by any -std option used. Valid ISO C and ISO C++ programs should compile properly with or without this option (though a rare few will require -ansi or a -std option specifying the required version of ISO C). However, without this option, certain GNU extensions and traditional C and C++ fea- tures are supported as well. With this option, they are rejected. -pedantic does not cause warning messages for use of the alternate keywords whose names begin and end with __. Pedantic warnings are also disabled in the expression that follows "__extension__". How- ever, only system header files should use these escape routes; application programs should avoid them. Some users try to use -pedantic to check programs for strict ISO C conformance. They soon find that it does not do quite what they want: it finds some non-ISO practices, but not all---only those for which ISO C requires a diagnostic, and some others for which diag- nostics have been added. A feature to report any failure to conform to ISO C might be useful in some instances, but would require considerable additional work and would be quite different from -pedantic. We don't have plans to support such a feature in the near future. Where the standard specified with -std represents a GNU extended dialect of C, such as gnu89 or gnu99, there is a corresponding base standard, the version of ISO C on which the GNU extended dialect is based. Warnings from -pedantic are given where they are required by the base standard. (It would not make sense for such warnings to be given only for features not in the specified GNU C dialect, since by definition the GNU dialects of C include all features the compiler supports with the given option, and there would be nothing to warn about.) -pedantic-errors Like -pedantic, except that errors are produced rather than warn- ings. -w Inhibit all warning messages. -Wno-import Inhibit warning messages about the use of #import. -Wchar-subscripts Warn if an array subscript has type "char". This is a common cause of error, as programmers often forget that this type is signed on some machines. -Wcomment Warn whenever a comment-start sequence /* appears in a /* comment, or whenever a Backslash-Newline appears in a // comment. -Wformat Check calls to "printf" and "scanf", etc., to make sure that the arguments supplied have types appropriate to the format string specified, and that the conversions specified in the format string make sense. This includes standard functions, and others specified by format attributes, in the "printf", "scanf", "strftime" and "strfmon" (an X/Open extension, not in the C standard) families. The formats are checked against the format features supported by GNU libc version 2.2. These include all ISO C90 and C99 features, as well as features from the Single Unix Specification and some BSD and GNU extensions. Other library implementations may not support all these features; GCC does not support warning about features that go beyond a particular library's limitations. However, if -pedantic is used with -Wformat, warnings will be given about for- mat features not in the selected standard version (but not for "strfmon" formats, since those are not in any version of the C standard). Since -Wformat also checks for null format arguments for several functions, -Wformat also implies -Wnonnull. -Wformat is included in -Wall. For more control over some aspects of format checking, the options -Wno-format-y2k, -Wno-format-extra- args, -Wno-format-zero-length, -Wformat-nonliteral, -Wformat-secu- rity, and -Wformat=2 are available, but are not included in -Wall. -Wno-format-y2k If -Wformat is specified, do not warn about "strftime" formats which may yield only a two-digit year. -Wno-format-extra-args If -Wformat is specified, do not warn about excess arguments to a "printf" or "scanf" format function. The C standard specifies that such arguments are ignored. Where the unused arguments lie between used arguments that are specified with $ operand number specifications, normally warnings are still given, since the implementation could not know what type to pass to "va_arg" to skip the unused arguments. However, in the case of "scanf" formats, this option will suppress the warning if the unused arguments are all pointers, since the Single Unix Speci- fication says that such unused arguments are allowed. -Wno-format-zero-length If -Wformat is specified, do not warn about zero-length formats. The C standard specifies that zero-length formats are allowed. -Wformat-nonliteral If -Wformat is specified, also warn if the format string is not a string literal and so cannot be checked, unless the format function takes its format arguments as a "va_list". -Wformat-security If -Wformat is specified, also warn about uses of format functions that represent possible security problems. At present, this warns about calls to "printf" and "scanf" functions where the format string is not a string literal and there are no format arguments, as in "printf (foo);". This may be a security hole if the format string came from untrusted input and contains %n. (This is cur- rently a subset of what -Wformat-nonliteral warns about, but in future warnings may be added to -Wformat-security that are not included in -Wformat-nonliteral.) -Wformat=2 Enable -Wformat plus format checks not included in -Wformat. Cur- rently equivalent to -Wformat -Wformat-nonliteral -Wformat-secu- rity. -Wnonnull Warn about passing a null pointer for arguments marked as requiring a non-null value by the "nonnull" function attribute. -Wnonnull is included in -Wall and -Wformat. It can be disabled with the -Wno-nonnull option. -Wimplicit-int Warn when a declaration does not specify a type. -Wimplicit-function-declaration -Werror-implicit-function-declaration Give a warning (or error) whenever a function is used before being declared. -Wimplicit Same as -Wimplicit-int and -Wimplicit-function-declaration. -Wmain Warn if the type of main is suspicious. main should be a function with external linkage, returning int, taking either zero arguments, two, or three arguments of appropriate types. -Wmissing-braces Warn if an aggregate or union initializer is not fully bracketed. In the following example, the initializer for a is not fully brack- eted, but that for b is fully bracketed. int a[2][2] = { 0, 1, 2, 3 }; int b[2][2] = { { 0, 1 }, { 2, 3 } }; -Wparentheses Warn if parentheses are omitted in certain contexts, such as when there is an assignment in a context where a truth value is expected, or when operators are nested whose precedence people often get confused about. Also warn about constructions where there may be confusion to which "if" statement an "else" branch belongs. Here is an example of such a case: { if (a) if (b) foo (); else bar (); } In C, every "else" branch belongs to the innermost possible "if" statement, which in this example is "if (b)". This is often not what the programmer expected, as illustrated in the above example by indentation the programmer chose. When there is the potential for this confusion, GCC will issue a warning when this flag is specified. To eliminate the warning, add explicit braces around the innermost "if" statement so there is no way the "else" could belong to the enclosing "if". The resulting code would look like this: { if (a) { if (b) foo (); else bar (); } } -Wsequence-point Warn about code that may have undefined semantics because of viola- tions of sequence point rules in the C standard. The C standard defines the order in which expressions in a C pro- gram are evaluated in terms of sequence points, which represent a partial ordering between the execution of parts of the program: those executed before the sequence point, and those executed after it. These occur after the evaluation of a full expression (one which is not part of a larger expression), after the evaluation of the first operand of a "&&", "||", "? :" or "," (comma) operator, before a function is called (but after the evaluation of its argu- ments and the expression denoting the called function), and in cer- tain other places. Other than as expressed by the sequence point rules, the order of evaluation of subexpressions of an expression is not specified. All these rules describe only a partial order rather than a total order, since, for example, if two functions are called within one expression with no sequence point between them, the order in which the functions are called is not specified. How- ever, the standards committee have ruled that function calls do not overlap. It is not specified when between sequence points modifications to the values of objects take effect. Programs whose behavior depends on this have undefined behavior; the C standard specifies that ``Between the previous and next sequence point an object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be read only to determine the value to be stored.''. If a program breaks these rules, the results on any particular implementation are entirely unpredictable. Examples of code with undefined behavior are "a = a++;", "a[n] = b[n++]" and "a[i++] = i;". Some more complicated cases are not diagnosed by this option, and it may give an occasional false posi- tive result, but in general it has been found fairly effective at detecting this sort of problem in programs. The present implementation of this option only works for C pro- grams. A future implementation may also work for C++ programs. The C standard is worded confusingly, therefore there is some debate over the precise meaning of the sequence point rules in sub- tle cases. Links to discussions of the problem, including proposed formal definitions, may be found on our readings page, at <http://gcc.gnu.org/readings.html>. -Wreturn-type Warn whenever a function is defined with a return-type that defaults to "int". Also warn about any "return" statement with no return-value in a function whose return-type is not "void". For C++, a function without return type always produces a diagnos- tic message, even when -Wno-return-type is specified. The only exceptions are main and functions defined in system headers. -Wswitch Warn whenever a "switch" statement has an index of enumeral type and lacks a "case" for one or more of the named codes of that enu- meration. (The presence of a "default" label prevents this warn- ing.) "case" labels outside the enumeration range also provoke warnings when this option is used. -Wswitch-default Warn whenever a "switch" statement does not have a "default" case. -Wswitch-enum Warn whenever a "switch" statement has an index of enumeral type and lacks a "case" for one or more of the named codes of that enu- meration. "case" labels outside the enumeration range also provoke warnings when this option is used. -Wtrigraphs Warn if any trigraphs are encountered that might change the meaning of the program (trigraphs within comments are not warned about). -Wunused-function Warn whenever a static function is declared but not defined or a non\-inline static function is unused. -Wunused-label Warn whenever a label is declared but not used. To suppress this warning use the unused attribute. -Wunused-parameter Warn whenever a function parameter is unused aside from its decla- ration. To suppress this warning use the unused attribute. -Wunused-variable Warn whenever a local variable or non-constant static variable is unused aside from its declaration To suppress this warning use the unused attribute. -Wunused-value Warn whenever a statement computes a result that is explicitly not used. To suppress this warning cast the expression to void. -Wunused All the above -Wunused options combined. In order to get a warning about an unused function parameter, you must either specify -W -Wunused or separately specify -Wunused- parameter. -Wuninitialized Warn if an automatic variable is used without first being initial- ized or if a variable may be clobbered by a "setjmp" call. These warnings are possible only in optimizing compilation, because they require data flow information that is computed only when opti- mizing. If you don't specify -O, you simply won't get these warn- ings. These warnings occur only for variables that are candidates for register allocation. Therefore, they do not occur for a variable that is declared "volatile", or whose address is taken, or whose size is other than 1, 2, 4 or 8 bytes. Also, they do not occur for structures, unions or arrays, even when they are in registers. Note that there may be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data flow analysis before the warn- ings are printed. These warnings are made optional because GCC is not smart enough to see all the reasons why the code might be correct despite appearing to have an error. Here is one example of how this can happen: { int x; switch (y) { case 1: x = 1; break; case 2: x = 4; break; case 3: x = 5; } foo (x); } If the value of "y" is always 1, 2 or 3, then "x" is always ini- tialized, but GCC doesn't know this. Here is another common case: { int save_y; if (change_y) save_y = y, y = new_y; ... if (change_y) y = save_y; } This has no bug because "save_y" is used only if it is set. This option also warns when a non-volatile automatic variable might be changed by a call to "longjmp". These warnings as well are pos- sible only in optimizing compilation. The compiler sees only the calls to "setjmp". It cannot know where "longjmp" will be called; in fact, a signal handler could call it at any point in the code. As a result, you may get a warning even when there is in fact no problem because "longjmp" cannot in fact be called at the place which would cause a problem. Some spurious warnings can be avoided if you declare all the func- tions you use that never return as "noreturn". -Wunknown-pragmas Warn when a #pragma directive is encountered which is not under- stood by GCC. If this command line option is used, warnings will even be issued for unknown pragmas in system header files. This is not the case if the warnings were only enabled by the -Wall command line option. -Wstrict-aliasing This option is only active when -fstrict-aliasing is active. It warns about code which might break the strict aliasing rules that the compiler is using for optimization. The warning does not catch all cases, but does attempt to catch the more common pitfalls. It is included in -Wall. -Wall All of the above -W options combined. This enables all the warn- ings about constructions that some users consider questionable, and that are easy to avoid (or modify to prevent the warning), even in conjunction with macros. This also enables some language-specific warnings described in @ref{C++ Dialect Options} and @ref{Objective- C Dialect Options}. The following -W... options are not implied by -Wall. Some of them warn about constructions that users generally do not consider question- able, but which occasionally you might wish to check for; others warn about constructions that are necessary or hard to avoid in some cases, and there is no simple way to modify the code to suppress the warning. -W Print extra warning messages for these events: · A function can return either with or without a value. (Falling off the end of the function body is considered returning with- out a value.) For example, this function would evoke such a warning: foo (a) { if (a > 0) return a; } · An expression-statement or the left-hand side of a comma expression contains no side effects. To suppress the warning, cast the unused expression to void. For example, an expression such as x[i,j] will cause a warning, but x[(void)i,j] will not. · An unsigned value is compared against zero with < or >=. · A comparison like x<=y<=z appears; this is equivalent to (x<=y ? 1 : 0) <= z, which is a different interpretation from that of ordinary mathematical notation. · Storage-class specifiers like "static" are not the first things in a declaration. According to the C Standard, this usage is obsolescent. · The return type of a function has a type qualifier such as "const". Such a type qualifier has no effect, since the value returned by a function is not an lvalue. (But don't warn about the GNU extension of "volatile void" return types. That exten- sion will be warned about if -pedantic is specified.) · If -Wall or -Wunused is also specified, warn about unused argu- ments. · A comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. (But don't warn if -Wno-sign-compare is also speci- fied.) · An aggregate has a partly bracketed initializer. For example, the following code would evoke such a warning, because braces are missing around the initializer for "x.h": struct s { int f, g; }; struct t { struct s h; int i; }; struct t x = { 1, 2, 3 }; · An aggregate has an initializer which does not initialize all members. For example, the following code would cause such a warning, because "x.h" would be implicitly initialized to zero: struct s { int f, g, h; }; struct s x = { 3, 4 }; -Wno-div-by-zero Do not warn about compile-time integer division by zero. Floating point division by zero is not warned about, as it can be a legiti- mate way of obtaining infinities and NaNs. -Wsystem-headers Print warning messages for constructs found in system header files. Warnings from system headers are normally suppressed, on the assumption that they usually do not indicate real problems and would only make the compiler output harder to read. Using this command line option tells GCC to emit warnings from system headers as if they occurred in user code. However, note that using -Wall in conjunction with this option will not warn about unknown pragmas in system headers---for that, -Wunknown-pragmas must also be used. -Wfloat-equal Warn if floating point values are used in equality comparisons. The idea behind this is that sometimes it is convenient (for the programmer) to consider floating-point values as approximations to infinitely precise real numbers. If you are doing this, then you need to compute (by analyzing the code, or in some other way) the maximum or likely maximum error that the computation introduces, and allow for it when performing comparisons (and when producing output, but that's a different problem). In particular, instead of testing for equality, you would check to see whether the two values have ranges that overlap; and this is done with the relational operators, so equality comparisons are probably mistaken. -Wtraditional (C only) Warn about certain constructs that behave differently in tradi- tional and ISO C. Also warn about ISO C constructs that have no traditional C equivalent, and/or problematic constructs which should be avoided. · Macro parameters that appear within string literals in the macro body. In traditional C macro replacement takes place within string literals, but does not in ISO C. · In traditional C, some preprocessor directives did not exist. Traditional preprocessors would only consider a line to be a directive if the # appeared in column 1 on the line. Therefore -Wtraditional warns about directives that traditional C under- stands but would ignore because the # does not appear as the first character on the line. It also suggests you hide direc- tives like #pragma not understood by traditional C by indenting them. Some traditional implementations would not recognize #elif, so it suggests avoiding it altogether. · A function-like macro that appears without arguments. · The unary plus operator. · The U integer constant suffix, or the F or L floating point constant suffixes. (Traditional C does support the L suffix on integer constants.) Note, these suffixes appear in macros defined in the system headers of most modern systems, e.g. the _MIN/_MAX macros in "<limits.h>". Use of these macros in user code might normally lead to spurious warnings, however gcc's integrated preprocessor has enough context to avoid warning in these cases. · A function declared external in one block and then used after the end of the block. · A "switch" statement has an operand of type "long". · A non-"static" function declaration follows a "static" one. This construct is not accepted by some traditional C compilers. · The ISO type of an integer constant has a different width or signedness from its traditional type. This warning is only issued if the base of the constant is ten. I.e. hexadecimal or octal values, which typically represent bit patterns, are not warned about. · Usage of ISO string concatenation is detected. · Initialization of automatic aggregates. · Identifier conflicts with labels. Traditional C lacks a sepa- rate namespace for labels. · Initialization of unions. If the initializer is zero, the warning is omitted. This is done under the assumption that the zero initializer in user code appears conditioned on e.g. "__STDC__" to avoid missing initializer warnings and relies on default initialization to zero in the traditional C case. · Conversions by prototypes between fixed/floating point values and vice versa. The absence of these prototypes when compiling with traditional C would cause serious problems. This is a subset of the possible conversion warnings, for the full set use -Wconversion. · Use of ISO C style function definitions. This warning inten- tionally is not issued for prototype declarations or variadic functions because these ISO C features will appear in your code when using libiberty's traditional C compatibility macros, "PARAMS" and "VPARAMS". This warning is also bypassed for nested functions because that feature is already a gcc exten- sion and thus not relevant to traditional C compatibility. -Wundef Warn if an undefined identifier is evaluated in an #if directive. -Wendif-labels Warn whenever an #else or an #endif are followed by text. -Wshadow Warn whenever a local variable shadows another local variable, parameter or global variable or whenever a built-in function is shadowed. -Wlarger-than-len Warn whenever an object of larger than len bytes is defined. -Wpointer-arith Warn about anything that depends on the ``size of'' a function type or of "void". GNU C assigns these types a size of 1, for conve- nience in calculations with "void *" pointers and pointers to func- tions. -Wbad-function-cast (C only) Warn whenever a function call is cast to a non-matching type. For example, warn if "int malloc()" is cast to "anything *". -Wcast-qual Warn whenever a pointer is cast so as to remove a type qualifier from the target type. For example, warn if a "const char *" is cast to an ordinary "char *". -Wcast-align Warn whenever a pointer is cast such that the required alignment of the target is increased. For example, warn if a "char *" is cast to an "int *" on machines where integers can only be accessed at two- or four-byte boundaries. -Wwrite-strings When compiling C, give string constants the type "const char[length]" so that copying the address of one into a non-"const" "char *" pointer will get a warning; when compiling C++, warn about the deprecated conversion from string constants to "char *". These warnings will help you find at compile time code that can try to write into a string constant, but only if you have been very care- ful about using "const" in declarations and prototypes. Otherwise, it will just be a nuisance; this is why we did not make -Wall request these warnings. -Wconversion Warn if a prototype causes a type conversion that is different from what would happen to the same argument in the absence of a proto- type. This includes conversions of fixed point to floating and vice versa, and conversions changing the width or signedness of a fixed point argument except when the same as the default promotion. Also, warn if a negative integer constant expression is implicitly converted to an unsigned type. For example, warn about the assign- ment "x = -1" if "x" is unsigned. But do not warn about explicit casts like "(unsigned) -1". -Wsign-compare Warn when a comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. This warning is enabled by -W, and by -Wall in C++ only. -Waggregate-return Warn if any functions that return structures or unions are defined or called. (In languages where you can return an array, this also elicits a warning.) -Wstrict-prototypes (C only) Warn if a function is declared or defined without specifying the argument types. (An old-style function definition is permitted without a warning if preceded by a declaration which specifies the argument types.) -Wmissing-prototypes (C only) Warn if a global function is defined without a previous prototype declaration. This warning is issued even if the definition itself provides a prototype. The aim is to detect global functions that fail to be declared in header files. -Wmissing-declarations (C only) Warn if a global function is defined without a previous declara- tion. Do so even if the definition itself provides a prototype. Use this option to detect global functions that are not declared in header files. -Wmissing-noreturn Warn about functions which might be candidates for attribute "nore- turn". Note these are only possible candidates, not absolute ones. Care should be taken to manually verify functions actually do not ever return before adding the "noreturn" attribute, otherwise sub- tle code generation bugs could be introduced. You will not get a warning for "main" in hosted C environments. -Wmissing-format-attribute If -Wformat is enabled, also warn about functions which might be candidates for "format" attributes. Note these are only possible candidates, not absolute ones. GCC will guess that "format" attributes might be appropriate for any function that calls a func- tion like "vprintf" or "vscanf", but this might not always be the case, and some functions for which "format" attributes are appro- priate may not be detected. This option has no effect unless -Wformat is enabled (possibly by -Wall). -Wno-multichar Do not warn if a multicharacter constant ('FOOF') is used. Usually they indicate a typo in the user's code, as they have implementa- tion-defined values, and should not be used in portable code. -Wno-deprecated-declarations Do not warn about uses of functions, variables, and types marked as deprecated by using the "deprecated" attribute. (@pxref{Function Attributes}, @pxref{Variable Attributes}, @pxref{Type Attributes}.) -Wpacked Warn if a structure is given the packed attribute, but the packed attribute has no effect on the layout or size of the structure. Such structures may be mis-aligned for little benefit. For instance, in this code, the variable "f.x" in "struct bar" will be misaligned even though "struct bar" does not itself have the packed attribute: struct foo { int x; char a, b, c, d; } __attribute__((packed)); struct bar { char z; struct foo f; }; -Wpadded Warn if padding is included in a structure, either to align an ele- ment of the structure or to align the whole structure. Sometimes when this happens it is possible to rearrange the fields of the structure to reduce the padding and so make the structure smaller. -Wredundant-decls Warn if anything is declared more than once in the same scope, even in cases where multiple declaration is valid and changes nothing. -Wnested-externs (C only) Warn if an "extern" declaration is encountered within a function. -Wunreachable-code Warn if the compiler detects that code will never be executed. This option is intended to warn when the compiler detects that at least a whole line of source code will never be executed, because some condition is never satisfied or because it is after a proce- dure that never returns. It is possible for this option to produce a warning even though there are circumstances under which part of the affected line can be executed, so care should be taken when removing apparently- unreachable code. For instance, when a function is inlined, a warning may mean that the line is unreachable in only one inlined copy of the function. This option is not made part of -Wall because in a debugging ver- sion of a program there is often substantial code which checks cor- rect functioning of the program and is, hopefully, unreachable because the program does work. Another common use of unreachable code is to provide behavior which is selectable at compile-time. -Winline Warn if a function can not be inlined and it was declared as inline. Even with this option, the compiler will not warn about failures to inline functions declared in system headers. The compiler uses a variety of heuristics to determine whether or not to inline a function. For example, the compiler takes into account the size of the function being inlined and the the amount of inlining that has already been done in the current function. Therefore, seemingly insignificant changes in the source program can cause the warnings produced by -Winline to appear or disappear. -Wlong-long Warn if long long type is used. This is default. To inhibit the warning messages, use -Wno-long-long. Flags -Wlong-long and -Wno- long-long are taken into account only when -pedantic flag is used. -Wdisabled-optimization Warn if a requested optimization pass is disabled. This warning does not generally indicate that there is anything wrong with your code; it merely indicates that GCC's optimizers were unable to han- dle the code effectively. Often, the problem is that your code is too big or too complex; GCC will refuse to optimize programs when the optimization itself is likely to take inordinate amounts of time. -Werror Make all warnings into errors. Options for Debugging Your Program or GCC GCC has various special options that are used for debugging either your program or GCC: -g Produce debugging information in the operating system's native for- mat (stabs, COFF, XCOFF, or DWARF). GDB can work with this debug- ging information. On most systems that use stabs format, -g enables use of extra debugging information that only GDB can use; this extra information makes debugging work better in GDB but will probably make other debuggers crash or refuse to read the program. If you want to con- trol for certain whether to generate the extra information, use -gstabs+, -gstabs, -gxcoff+, -gxcoff, -gdwarf-1+, -gdwarf-1, or -gvms (see below). Unlike most other C compilers, GCC allows you to use -g with -O. The shortcuts taken by optimized code may occasionally produce sur- prising results: some variables you declared may not exist at all; flow of control may briefly move where you did not expect it; some statements may not be executed because they compute constant results or their values were already at hand; some statements may execute in different places because they were moved out of loops. Nevertheless it proves possible to debug optimized output. This makes it reasonable to use the optimizer for programs that might have bugs. The following options are useful when GCC is generated with the capability for more than one debugging format. -ggdb Produce debugging information for use by GDB. This means to use the most expressive format available (DWARF 2, stabs, or the native format if neither of those are supported), including GDB extensions if at all possible. -gstabs Produce debugging information in stabs format (if that is sup- ported), without GDB extensions. This is the format used by DBX on most BSD systems. On MIPS, Alpha and System V Release 4 systems this option produces stabs debugging output which is not understood by DBX or SDB. On System V Release 4 systems this option requires the GNU assembler. -gstabs+ Produce debugging information in stabs format (if that is sup- ported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debug- gers crash or refuse to read the program. -gcoff Produce debugging information in COFF format (if that is sup- ported). This is the format used by SDB on most System V systems prior to System V Release 4. -gxcoff Produce debugging information in XCOFF format (if that is sup- ported). This is the format used by the DBX debugger on IBM RS/6000 systems. -gxcoff+ Produce debugging information in XCOFF format (if that is sup- ported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debug- gers crash or refuse to read the program, and may cause assemblers other than the GNU assembler (GAS) to fail with an error. -gdwarf Produce debugging information in DWARF version 1 format (if that is supported). This is the format used by SDB on most System V Release 4 systems. This option is deprecated. -gdwarf+ Produce debugging information in DWARF version 1 format (if that is supported), using GNU extensions understood only by the GNU debug- ger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program. This option is deprecated. -gdwarf-2 Produce debugging information in DWARF version 2 format (if that is supported). This is the format used by DBX on IRIX 6. -gvms Produce debugging information in VMS debug format (if that is sup- ported). This is the format used by DEBUG on VMS systems. -glevel -ggdblevel -gstabslevel -gcofflevel -gxcofflevel -gvmslevel Request debugging information and also use level to specify how much information. The default level is 2. Level 1 produces minimal information, enough for making backtraces in parts of the program that you don't plan to debug. This includes descriptions of functions and external variables, but no information about local variables and no line numbers. Level 3 includes extra information, such as all the macro defini- tions present in the program. Some debuggers support macro expan- sion when you use -g3. Note that in order to avoid confusion between DWARF1 debug level 2, and DWARF2, neither -gdwarf nor -gdwarf-2 accept a concatenated debug level. Instead use an additional -glevel option to change the debug level for DWARF1 or DWARF2. -feliminate-dwarf2-dups Compress DWARF2 debugging information by eliminating duplicated information about each symbol. This option only makes sense when generating DWARF2 debugging information with -gdwarf-2. -p Generate extra code to write profile information suitable for the analysis program prof. You must use this option when compiling the source files you want data about, and you must also use it when linking. -pg Generate extra code to write profile information suitable for the analysis program gprof. You must use this option when compiling the source files you want data about, and you must also use it when linking. -Q Makes the compiler print out each function name as it is compiled, and print some statistics about each pass when it finishes. -ftime-report Makes the compiler print some statistics about the time consumed by each pass when it finishes. -fmem-report Makes the compiler print some statistics about permanent memory allocation when it finishes. -fprofile-arcs Instrument arcs during compilation to generate coverage data or for profile-directed block ordering. During execution the program records how many times each branch is executed and how many times it is taken. When the compiled program exits it saves this data to a file called auxname.da for each source file. auxname is gener- ated from the name of the output file, if explicitly specified and it is not the final executable, otherwise it is the basename of the source file. In both cases any suffix is removed (e.g. foo.da for input file dir/foo.c, or dir/foo.da for output file specified as -o dir/foo.o). For profile-directed block ordering, compile the program with -fprofile-arcs plus optimization and code generation options, gen- erate the arc profile information by running the program on a selected workload, and then compile the program again with the same optimization and code generation options plus -fbranch-probabili- ties. The other use of -fprofile-arcs is for use with gcov, when it is used with the -ftest-coverage option. With -fprofile-arcs, for each function of your program GCC creates a program flow graph, then finds a spanning tree for the graph. Only arcs that are not on the spanning tree have to be instru- mented: the compiler adds code to count the number of times that these arcs are executed. When an arc is the only exit or only entrance to a block, the instrumentation code can be added to the block; otherwise, a new basic block must be created to hold the instrumentation code. -ftest-coverage Create data files for the gcov code-coverage utility. See -fpro- file-arcs option above for a description of auxname. auxname.bb A mapping from basic blocks to line numbers, which gcov uses to associate basic block execution counts with line numbers. auxname.bbg A list of all arcs in the program flow graph. This allows gcov to reconstruct the program flow graph, so that it can compute all basic block and arc execution counts from the information in the auxname.da file. Use -ftest-coverage with -fprofile-arcs; the latter option adds instrumentation to the program, which then writes execution counts to another data file: auxname.da Runtime arc execution counts, used in conjunction with the arc information in the file auxname.bbg. Coverage data will map better to the source files if -ftest-cover- age is used without optimization. -dletters Says to make debugging dumps during compilation at times specified by letters. This is used for debugging the compiler. The file names for most of the dumps are made by appending a pass number and a word to the dumpname. dumpname is generated from the name of the output file, if explicitly specified and it is not an executable, otherwise it is the basename of the source file. In both cases any suffix is removed (e.g. foo.00.rtl or foo.01.sibling). Here are the possible letters for use in letters, and their meanings: A Annotate the assembler output with miscellaneous debugging information. b Dump after computing branch probabilities, to file.14.bp. B Dump after block reordering, to file.32.bbro. c Dump after instruction combination, to the file file.19.com- bine. C Dump after the first if conversion, to the file file.15.ce1. d Dump after delayed branch scheduling, to file.34.dbr. D Dump all macro definitions, at the end of preprocessing, in addition to normal output. e Dump after SSA optimizations, to file.04.ssa and file.07.ussa. E Dump after the second if conversion, to file.29.ce3. f Dump after control and data flow analysis, to file.14.cfg. Also dump after life analysis, to file.18.life. F Dump after purging "ADDRESSOF" codes, to file.10.addressof. g Dump after global register allocation, to file.24.greg. G Dump after GCSE, to file.11.gcse. h Dump after finalization of EH handling code, to file.02.eh. i Dump after sibling call optimizations, to file.01.sibling. j Dump after the first jump optimization, to file.03.jump. k Dump after conversion from registers to stack, to file.31.stack. l Dump after local register allocation, to file.23.lreg. L Dump after loop optimization, to file.12.loop. M Dump after performing the machine dependent reorganization pass, to file.33.mach. n Dump after register renumbering, to file.28.rnreg. N Dump after the register move pass, to file.21.regmove. o Dump after post-reload optimizations, to file.25.postreload. r Dump after RTL generation, to file.00.rtl. R Dump after the second scheduling pass, to file.30.sched2. s Dump after CSE (including the jump optimization that sometimes follows CSE), to file.09.cse. S Dump after the first scheduling pass, to file.22.sched. t Dump after the second CSE pass (including the jump optimization that sometimes follows CSE), to file.17.cse2. T Dump after running tracer, to file.16.tracer. u Dump after null pointer elimination pass to file.08.null. w Dump after the second flow pass, to file.26.flow2. W Dump after SSA conditional constant propagation, to file.05.ssaccp. X Dump after SSA dead code elimination, to file.06.ssadce. z Dump after the peephole pass, to file.27.peephole2. a Produce all the dumps listed above. m Print statistics on memory usage, at the end of the run, to standard error. p Annotate the assembler output with a comment indicating which pattern and alternative was used. The length of each instruc- tion is also printed. P Dump the RTL in the assembler output as a comment before each instruction. Also turns on -dp annotation. v For each of the other indicated dump files (except for file.00.rtl), dump a representation of the control flow graph suitable for viewing with VCG to file.pass.vcg. x Just generate RTL for a function instead of compiling it. Usu- ally used with r. y Dump debugging information during parsing, to standard error. -fdump-unnumbered When doing debugging dumps (see -d option above), suppress instruc- tion numbers and line number note output. This makes it more fea- sible to use diff on debugging dumps for compiler invocations with different options, in particular with and without -g. -fdump-translation-unit (C and C++ only) -fdump-translation-unit-options (C and C++ only) Dump a representation of the tree structure for the entire transla- tion unit to a file. The file name is made by appending .tu to the source file name. If the -options form is used, options controls the details of the dump as described for the -fdump-tree options. -fdump-class-hierarchy (C++ only) -fdump-class-hierarchy-options (C++ only) Dump a representation of each class's hierarchy and virtual func- tion table layout to a file. The file name is made by appending .class to the source file name. If the -options form is used, options controls the details of the dump as described for the -fdump-tree options. -fdump-tree-switch (C++ only) -fdump-tree-switch-options (C++ only) Control the dumping at various stages of processing the intermedi- ate language tree to a file. The file name is generated by append- ing a switch specific suffix to the source file name. If the -options form is used, options is a list of - separated options that control the details of the dump. Not all options are applica- ble to all dumps, those which are not meaningful will be ignored. The following options are available address Print the address of each node. Usually this is not meaningful as it changes according to the environment and source file. Its primary use is for tying up a dump file with a debug environ- ment. slim Inhibit dumping of members of a scope or body of a function merely because that scope has been reached. Only dump such items when they are directly reachable by some other path. all Turn on all options. The following tree dumps are possible: original Dump before any tree based optimization, to file.original. optimized Dump after all tree based optimization, to file.optimized. inlined Dump after function inlining, to file.inlined. -frandom-seed=string This option provides a seed that GCC uses when it would otherwise use random numbers. At present, this is used to generate certain symbol names that have to be different in every compiled file. The string should be different for every file you compile. -fsched-verbose=n On targets that use instruction scheduling, this option controls the amount of debugging output the scheduler prints. This informa- tion is written to standard error, unless -dS or -dR is specified, in which case it is output to the usual dump listing file, .sched or .sched2 respectively. However for n greater than nine, the out- put is always printed to standard error. For n greater than zero, -fsched-verbose outputs the same informa- tion as -dRS. For n greater than one, it also output basic block probabilities, detailed ready list information and unit/insn info. For n greater than two, it includes RTL at abort point, control- flow and regions info. And for n over four, -fsched-verbose also includes dependence info. -save-temps Store the usual ``temporary'' intermediate files permanently; place them in the current directory and name them based on the source file. Thus, compiling foo.c with -c -save-temps would produce files foo.i and foo.s, as well as foo.o. This creates a prepro- cessed foo.i output file even though the compiler now normally uses an integrated preprocessor. -time Report the CPU time taken by each subprocess in the compilation sequence. For C source files, this is the compiler proper and assembler (plus the linker if linking is done). The output looks like this: # cc1 0.12 0.01 # as 0.00 0.01 The first number on each line is the ``user time,'' that is time spent executing the program itself. The second number is ``system time,'' time spent executing operating system routines on behalf of the program. Both numbers are in seconds. -print-file-name=library Print the full absolute name of the library file library that would be used when linking---and don't do anything else. With this option, GCC does not compile or link anything; it just prints the file name. -print-multi-directory Print the directory name corresponding to the multilib selected by any other switches present in the command line. This directory is supposed to exist in GCC_EXEC_PREFIX. -print-multi-lib Print the mapping from multilib directory names to compiler switches that enable them. The directory name is separated from the switches by ;, and each switch starts with an @} instead of the @samp{-, without spaces between multiple switches. This is sup- posed to ease shell-processing. -print-prog-name=program Like -print-file-name, but searches for a program such as cpp. -print-libgcc-file-name Same as -print-file-name=libgcc.a. This is useful when you use -nostdlib or -nodefaultlibs but you do want to link with libgcc.a. You can do gcc -nostdlib <files>... `gcc -print-libgcc-file-name` -print-search-dirs Print the name of the configured installation directory and a list of program and library directories gcc will search---and don't do anything else. This is useful when gcc prints the error message installation prob- lem, cannot exec cpp0: No such file or directory. To resolve this you either need to put cpp0 and the other compiler components where gcc expects to find them, or you can set the environment variable GCC_EXEC_PREFIX to the directory where you installed them. Don't forget the trailing '/'. -dumpmachine Print the compiler's target machine (for example, i686-pc-linux- gnu)---and don't do anything else. -dumpversion Print the compiler version (for example, 3.0)---and don't do any- thing else. -dumpspecs Print the compiler's built-in specs---and don't do anything else. (This is used when GCC itself is being built.) Options That Control Optimization These options control various sorts of optimizations. Without any optimization option, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you would expect from the source code. Turning on optimization flags makes the compiler attempt to improve the performance and/or code size at the expense of compilation time and possibly the ability to debug the program. Not all optimizations are controlled directly by a flag. Only opti- mizations that have a flag are listed. -O -O1 Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of com- pilation time. -O turns on the following optimization flags: -fdefer-pop -fmerge- constants -fthread-jumps -floop-optimize -fcrossjumping -fif-con- version -fif-conversion2 -fdelayed-branch -fguess-branch-probabil- ity -fcprop-registers -O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging. -O2 Optimize even more. GCC performs nearly all supported optimiza- tions that do not involve a space-speed tradeoff. The compiler does not perform loop unrolling or function inlining when you spec- ify -O2. As compared to -O, this option increases both compilation time and the performance of the generated code. -O2 turns on all optimization flags specified by -O. It also turns on the following optimization flags: -fforce-mem -foptimize-sib- ling-calls -fstrength-reduce -fcse-follow-jumps -fcse-skip-blocks -frerun-cse-after-loop -frerun-loop-opt -fgcse -fgcse-lm -fgcse-sm -fdelete-null-pointer-checks -fexpensive-optimizations -fregmove -fschedule-insns -fschedule-insns2 -fsched-interblock -fsched-spec -fcaller-saves -fpeephole2 -freorder-blocks -fre- order-functions -fstrict-aliasing -falign-functions -falign-jumps -falign-loops -falign-labels Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos. -O3 Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions and -frename-registers options. -O0 Do not optimize. This is the default. -Os Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimiza- tions designed to reduce code size. -Os disables the following optimization flags: -falign-functions -falign-jumps -falign-loops -falign-labels -freorder-blocks -fprefetch-loop-arrays If you use multiple -O options, with or without level numbers, the last such option is the one that is effective. Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed---the one you typically will use. You can figure out the other form by either removing no- or adding it. The following options control specific optimizations. They are either activated by -O options or are related to ones that are. You can use the following flags in the rare cases when ``fine-tuning'' of optimiza- tions to be performed is desired. -fno-default-inline Do not make member functions inline by default merely because they are defined inside the class scope (C++ only). Otherwise, when you specify -O, member functions defined inside class scope are com- piled inline by default; i.e., you don't need to add inline in front of the member function name. -fno-defer-pop Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once. Disabled at levels -O, -O2, -O3, -Os. -fforce-mem Force memory operands to be copied into registers before doing arithmetic on them. This produces better code by making all memory references potential common subexpressions. When they are not com- mon subexpressions, instruction combination should eliminate the separate register-load. Enabled at levels -O2, -O3, -Os. -fforce-addr Force memory address constants to be copied into registers before doing arithmetic on them. This may produce better code just as -fforce-mem may. -fomit-frame-pointer Don't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions. It also makes debugging impossible on some machines. On some machines, such as the VAX, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro "FRAME_POINTER_REQUIRED" controls whether a target machine supports this flag. Enabled at levels -O, -O2, -O3, -Os. -foptimize-sibling-calls Optimize sibling and tail recursive calls. Enabled at levels -O2, -O3, -Os. -fno-inline Don't pay attention to the "inline" keyword. Normally this option is used to keep the compiler from expanding any functions inline. Note that if you are not optimizing, no functions can be expanded inline. -finline-functions Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way. If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as assembler code in its own right. Enabled at level -O3. -finline-limit=n By default, gcc limits the size of functions that can be inlined. This flag allows the control of this limit for functions that are explicitly marked as inline (i.e., marked with the inline keyword or defined within the class definition in c++). n is the size of functions that can be inlined in number of pseudo instructions (not counting parameter handling). The default value of n is 600. Increasing this value can result in more inlined code at the cost of compilation time and memory consumption. Decreasing usually makes the compilation faster and less code will be inlined (which presumably means slower programs). This option is particularly useful for programs that use inlining heavily such as those based on recursive templates with C++. Inlining is actually controlled by a number of parameters, which may be specified individually by using --param name=value. The -finline-limit=n option sets some of these parameters as follows: @item max-inline-insns is set to I<n>. @item max-inline-insns-single is set to I<n>/2. @item max-inline-insns-auto is set to I<n>/2. @item min-inline-insns is set to 130 or I<n>/4, whichever is smaller. @item max-inline-insns-rtl is set to I<n>. Using -finline-limit=600 thus results in the default settings for these parameters. See below for a documentation of the individual parameters controlling inlining. Note: pseudo instruction represents, in this particular context, an abstract measurement of function's size. In no way, it represents a count of assembly instructions and as such its exact meaning might change from one release to an another. -fkeep-inline-functions Even if all calls to a given function are integrated, and the func- tion is declared "static", nevertheless output a separate run-time callable version of the function. This switch does not affect "extern inline" functions. -fkeep-static-consts Emit variables declared "static const" when optimization isn't turned on, even if the variables aren't referenced. GCC enables this option by default. If you want to force the com- piler to check if the variable was referenced, regardless of whether or not optimization is turned on, use the -fno-keep-static- consts option. -fmerge-constants Attempt to merge identical constants (string constants and floating point constants) across compilation units. This option is the default for optimized compilation if the assem- bler and linker support it. Use -fno-merge-constants to inhibit this behavior. Enabled at levels -O, -O2, -O3, -Os. -fmerge-all-constants Attempt to merge identical constants and identical variables. This option implies -fmerge-constants. In addition to -fmerge-con- stants this considers e.g. even constant initialized arrays or ini- tialized constant variables with integral or floating point types. Languages like C or C++ require each non-automatic variable to have distinct location, so using this option will result in non-conform- ing behavior. -fno-branch-count-reg Do not use ``decrement and branch'' instructions on a count regis- ter, but instead generate a sequence of instructions that decrement a register, compare it against zero, then branch based upon the result. This option is only meaningful on architectures that sup- port such instructions, which include x86, PowerPC, IA-64 and S/390. The default is -fbranch-count-reg, enabled when -fstrength-reduce is enabled. -fno-function-cse Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address explicitly. This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimiza- tions performed when this option is not used. The default is -ffunction-cse -fno-zero-initialized-in-bss If the target supports a BSS section, GCC by default puts variables that are initialized to zero into BSS. This can save space in the resulting code. This option turns off this behavior because some programs explic- itly rely on variables going to the data section. E.g., so that the resulting executable can find the beginning of that section and/or make assumptions based on that. The default is -fzero-initialized-in-bss. -fstrength-reduce Perform the optimizations of loop strength reduction and elimina- tion of iteration variables. Enabled at levels -O2, -O3, -Os. -fthread-jumps Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false. Enabled at levels -O, -O2, -O3, -Os. -fcse-follow-jumps In common subexpression elimination, scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an "if" statement with an "else" clause, CSE will follow the jump when the condition tested is false. Enabled at levels -O2, -O3, -Os. -fcse-skip-blocks This is similar to -fcse-follow-jumps, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple "if" statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the "if". Enabled at levels -O2, -O3, -Os. -frerun-cse-after-loop Re-run common subexpression elimination after loop optimizations has been performed. Enabled at levels -O2, -O3, -Os. -frerun-loop-opt Run the loop optimizer twice. Enabled at levels -O2, -O3, -Os. -fgcse Perform a global common subexpression elimination pass. This pass also performs global constant and copy propagation. Note: When compiling a program using computed gotos, a GCC exten- sion, you may get better runtime performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. Enabled at levels -O2, -O3, -Os. -fgcse-lm When -fgcse-lm is enabled, global common subexpression elimination will attempt to move loads which are only killed by stores into themselves. This allows a loop containing a load/store sequence to be changed to a load outside the loop, and a copy/store within the loop. Enabled by default when gcse is enabled. -fgcse-sm When -fgcse-sm is enabled, A store motion pass is run after global common subexpression elimination. This pass will attempt to move stores out of loops. When used in conjunction with -fgcse-lm, loops containing a load/store sequence can be changed to a load before the loop and a store after the loop. Enabled by default when gcse is enabled. -floop-optimize Perform loop optimizations: move constant expressions out of loops, simplify exit test conditions and optionally do strength-reduction and loop unrolling as well. Enabled at levels -O, -O2, -O3, -Os. -fcrossjumping Perform cross-jumping transformation. This transformation unifies equivalent code and save code size. The resulting code may or may not perform better than without cross-jumping. Enabled at levels -O, -O2, -O3, -Os. -fif-conversion Attempt to transform conditional jumps into branch-less equiva- lents. This include use of conditional moves, min, max, set flags and abs instructions, and some tricks doable by standard arith- metics. The use of conditional execution on chips where it is available is controlled by "if-conversion2". Enabled at levels -O, -O2, -O3, -Os. -fif-conversion2 Use conditional execution (where available) to transform condi- tional jumps into branch-less equivalents. Enabled at levels -O, -O2, -O3, -Os. -fdelete-null-pointer-checks Use global dataflow analysis to identify and eliminate useless checks for null pointers. The compiler assumes that dereferencing a null pointer would have halted the program. If a pointer is checked after it has already been dereferenced, it cannot be null. In some environments, this assumption is not true, and programs can safely dereference null pointers. Use -fno-delete-null-pointer- checks to disable this optimization for programs which depend on that behavior. Enabled at levels -O2, -O3, -Os. -fexpensive-optimizations Perform a number of minor optimizations that are relatively expen- sive. Enabled at levels -O2, -O3, -Os. -foptimize-register-move -fregmove Attempt to reassign register numbers in move instructions and as operands of other simple instructions in order to maximize the amount of register tying. This is especially helpful on machines with two-operand instructions. Note -fregmove and -foptimize-register-move are the same optimiza- tion. Enabled at levels -O2, -O3, -Os. -fdelayed-branch If supported for the target machine, attempt to reorder instruc- tions to exploit instruction slots available after delayed branch instructions. Enabled at levels -O, -O2, -O3, -Os. -fschedule-insns If supported for the target machine, attempt to reorder instruc- tions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required. Enabled at levels -O2, -O3, -Os. -fschedule-insns2 Similar to -fschedule-insns, but requests an additional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small num- ber of registers and where memory load instructions take more than one cycle. Enabled at levels -O2, -O3, -Os. -fno-sched-interblock Don't schedule instructions across basic blocks. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher. -fno-sched-spec Don't allow speculative motion of non-load instructions. This is normally enabled by default when scheduling before register alloca- tion, i.e. with -fschedule-insns or at -O2 or higher. -fsched-spec-load Allow speculative motion of some load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher. -fsched-spec-load-dangerous Allow speculative motion of more load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher. -fcaller-saves Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced. This option is always enabled by default on certain machines, usu- ally those which have no call-preserved registers to use instead. Enabled at levels -O2, -O3, -Os. -fmove-all-movables Forces all invariant computations in loops to be moved outside the loop. -freduce-all-givs Forces all general-induction variables in loops to be strength- reduced. Note: When compiling programs written in Fortran, -fmove-all-mov- ables and -freduce-all-givs are enabled by default when you use the optimizer. These options may generate better or worse code; results are highly dependent on the structure of loops within the source code. These two options are intended to be removed someday, once they have helped determine the efficacy of various approaches to improv- ing loop optimizations. Please let us (<gcc@gcc.gnu.org> and <fortran@gnu.org>) know how use of these options affects the performance of your production code. We're very interested in code that runs slower when these options are enabled. -fno-peephole -fno-peephole2 Disable any machine-specific peephole optimizations. The differ- ence between -fno-peephole and -fno-peephole2 is in how they are implemented in the compiler; some targets use one, some use the other, a few use both. -fpeephole is enabled by default. -fpeephole2 enabled at levels -O2, -O3, -Os. -fbranch-probabilities -fno-guess-branch-probability Do not guess branch probabilities using a randomized model. Sometimes gcc will opt to use a randomized model to guess branch probabilities, when none are available from either profiling feed- back (-fprofile-arcs) or __builtin_expect. This means that differ- ent runs of the compiler on the same program may produce different object code. In a hard real-time system, people don't want different runs of the compiler to produce code that has different behavior; minimizing non-determinism is of paramount import. This switch allows users to reduce non-determinism, possibly at the expense of inferior optimization. The default is -fguess-branch-probability at levels -O, -O2, -O3, -Os. -freorder-blocks Reorder basic blocks in the compiled function in order to reduce number of taken branches and improve code locality. Enabled at levels -O2, -O3. -freorder-functions Reorder basic blocks in the compiled function in order to reduce number of taken branches and improve code locality. This is imple- mented by using special subsections "text.hot" for most frequently executed functions and "text.unlikely" for unlikely executed func- tions. Reordering is done by the linker so object file format must support named sections and linker must place them in a reasonable way. Also profile feedback must be available in to make this option effective. See -fprofile-arcs for details. Enabled at levels -O2, -O3, -Os. -fstrict-aliasing Allows the compiler to assume the strictest aliasing rules applica- ble to the language being compiled. For C (and C++), this acti- vates optimizations based on the type of expressions. In particu- lar, an object of one type is assumed never to reside at the same address as an object of a different type, unless the types are almost the same. For example, an "unsigned int" can alias an "int", but not a "void*" or a "double". A character type may alias any other type. Pay special attention to code like this: union a_union { int i; double d; }; int f() { a_union t; t.d = 3.0; return t.i; } The practice of reading from a different union member than the one most recently written to (called ``type-punning'') is common. Even with -fstrict-aliasing, type-punning is allowed, provided the mem- ory is accessed through the union type. So, the code above will work as expected. However, this code might not: int f() { a_union t; int* ip; t.d = 3.0; ip = &t.i; return *ip; } Every language that wishes to perform language-specific alias anal- ysis should define a function that computes, given an "tree" node, an alias set for the node. Nodes in different alias sets are not allowed to alias. For an example, see the C front-end function "c_get_alias_set". Enabled at levels -O2, -O3, -Os. -falign-functions -falign-functions=n Align the start of functions to the next power-of-two greater than n, skipping up to n bytes. For instance, -falign-functions=32 aligns functions to the next 32-byte boundary, but -falign-func- tions=24 would align to the next 32-byte boundary only if this can be done by skipping 23 bytes or less. -fno-align-functions and -falign-functions=1 are equivalent and mean that functions will not be aligned. Some assemblers only support this flag when n is a power of two; in that case, it is rounded up. If n is not specified or is zero, use a machine-dependent default. Enabled at levels -O2, -O3. -falign-labels -falign-labels=n Align all branch targets to a power-of-two boundary, skipping up to n bytes like -falign-functions. This option can easily make code slower, because it must insert dummy operations for when the branch target is reached in the usual flow of the code. -fno-align-labels and -falign-labels=1 are equivalent and mean that labels will not be aligned. If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead. If n is not specified or is zero, use a machine-dependent default which is very likely to be 1, meaning no alignment. Enabled at levels -O2, -O3. -falign-loops -falign-loops=n Align loops to a power-of-two boundary, skipping up to n bytes like -falign-functions. The hope is that the loop will be executed many times, which will make up for any execution of the dummy opera- tions. -fno-align-loops and -falign-loops=1 are equivalent and mean that loops will not be aligned. If n is not specified or is zero, use a machine-dependent default. Enabled at levels -O2, -O3. -falign-jumps -falign-jumps=n Align branch targets to a power-of-two boundary, for branch targets where the targets can only be reached by jumping, skipping up to n bytes like -falign-functions. In this case, no dummy operations need be executed. -fno-align-jumps and -falign-jumps=1 are equivalent and mean that loops will not be aligned. If n is not specified or is zero, use a machine-dependent default. Enabled at levels -O2, -O3. -frename-registers Attempt to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimiza- tion will most benefit processors with lots of registers. It can, however, make debugging impossible, since variables will no longer stay in a ``home register''. Enabled at levels -O3. -fno-cprop-registers After register allocation and post-register allocation instruction splitting, we perform a copy-propagation pass to try to reduce scheduling dependencies and occasionally eliminate the copy. Disabled at levels -O, -O2, -O3, -Os. The following options control compiler behavior regarding floating point arithmetic. These options trade off between speed and correct- ness. All must be specifically enabled. -ffloat-store Do not store floating point variables in registers, and inhibit other options that might change whether a floating point value is taken from a register or memory. This option prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more precision than a "double" is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only good, but a few programs rely on the precise definition of IEEE floating point. Use -ffloat-store for such programs, after modifying them to store all pertinent intermediate computations into variables. -ffast-math Sets -fno-math-errno, -funsafe-math-optimizations, -fno-trapping- math, -ffinite-math-only and -fno-signaling-nans. This option causes the preprocessor macro "__FAST_MATH__" to be defined. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math func- tions. -fno-math-errno Do not set ERRNO after calling math functions that are executed with a single instruction, e.g., sqrt. A program that relies on IEEE exceptions for math error handling may want to use this flag for speed while maintaining IEEE arithmetic compatibility. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math func- tions. The default is -fmath-errno. -funsafe-math-optimizations Allow optimizations for floating-point arithmetic that (a) assume that arguments and results are valid and (b) may violate IEEE or ANSI standards. When used at link-time, it may include libraries or startup files that change the default FPU control word or other similar optimizations. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math func- tions. The default is -fno-unsafe-math-optimizations. -ffinite-math-only Allow optimizations for floating-point arithmetic that assume that arguments and results are not NaNs or +-Infs. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications. The default is -fno-finite-math-only. -fno-trapping-math Compile code assuming that floating-point operations cannot gener- ate user-visible traps. These traps include division by zero, overflow, underflow, inexact result and invalid operation. This option implies -fno-signaling-nans. Setting this option may allow faster code if one relies on ``non-stop'' IEEE arithmetic, for example. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math func- tions. The default is -ftrapping-math. -fsignaling-nans Compile code assuming that IEEE signaling NaNs may generate user- visible traps during floating-point operations. Setting this option disables optimizations that may change the number of excep- tions visible with signaling NaNs. This option implies -ftrapping- math. This option causes the preprocessor macro "__SUPPORT_SNAN__" to be defined. The default is -fno-signaling-nans. This option is experimental and does not currently guarantee to disable all GCC optimizations that affect signaling NaN behavior. -fsingle-precision-constant Treat floating point constant as single precision constant instead of implicitly converting it to double precision constant. The following options control optimizations that may improve perfor- mance, but are not enabled by any -O options. This section includes experimental options that may produce broken code. -fbranch-probabilities After running a program compiled with -fprofile-arcs, you can com- pile it a second time using -fbranch-probabilities, to improve optimizations based on the number of times each branch was taken. When the program compiled with -fprofile-arcs exits it saves arc execution counts to a file called sourcename.da for each source file The information in this data file is very dependent on the structure of the generated code, so you must use the same source code and the same optimization options for both compilations. With -fbranch-probabilities, GCC puts a REG_BR_PROB note on each JUMP_INSN and CALL_INSN. These can be used to improve optimiza- tion. Currently, they are only used in one place: in reorg.c, instead of guessing which path a branch is mostly to take, the REG_BR_PROB values are used to exactly determine which path is taken more often. -fnew-ra Use a graph coloring register allocator. Currently this option is meant for testing, so we are interested to hear about miscompila- tions with -fnew-ra. -ftracer Perform tail duplication to enlarge superblock size. This transfor- mation simplifies the control flow of the function allowing other optimizations to do better job. -funroll-loops Unroll loops whose number of iterations can be determined at com- pile time or upon entry to the loop. -funroll-loops implies both -fstrength-reduce and -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster. -funroll-all-loops Unroll all loops, even if their number of iterations is uncertain when the loop is entered. This usually makes programs run more slowly. -funroll-all-loops implies the same options as -funroll- loops, -fprefetch-loop-arrays If supported by the target machine, generate instructions to prefetch memory to improve the performance of loops that access large arrays. Disabled at level -Os. -ffunction-sections -fdata-sections Place each function or data item into its own section in the output file if the target supports arbitrary sections. The name of the function or the name of the data item determines the section's name in the output file. Use these options on systems where the linker can perform optimiza- tions to improve locality of reference in the instruction space. Most systems using the ELF object format and SPARC processors run- ning Solaris 2 have linkers with such optimizations. AIX may have these optimizations in the future. Only use these options when there are significant benefits from doing so. When you specify these options, the assembler and linker will create larger object and executable files and will also be slower. You will not be able to use "gprof" on all systems if you specify this option and you may have problems with debugging if you specify both this option and -g. -fssa Perform optimizations in static single assignment form. Each func- tion's flow graph is translated into SSA form, optimizations are performed, and the flow graph is translated back from SSA form. Users should not specify this option, since it is not yet ready for production use. -fssa-ccp Perform Sparse Conditional Constant Propagation in SSA form. Requires -fssa. Like -fssa, this is an experimental feature. -fssa-dce Perform aggressive dead-code elimination in SSA form. Requires -fssa. Like -fssa, this is an experimental feature. --param name=value In some places, GCC uses various constants to control the amount of optimization that is done. For example, GCC will not inline func- tions that contain more that a certain number of instructions. You can control some of these constants on the command-line using the --param option. The names of specific parameters, and the meaning of the values, are tied to the internals of the compiler, and are subject to change without notice in future releases. In each case, the value is an integer. The allowable choices for name are given in the following table: max-crossjump-edges The maximum number of incoming edges to consider for crossjump- ing. The algorithm used by -fcrossjumping is O(N^2) in the number of edges incoming to each block. Increasing values mean more aggressive optimization, making the compile time increase with probably small improvement in executable size. max-delay-slot-insn-search The maximum number of instructions to consider when looking for an instruction to fill a delay slot. If more than this arbi- trary number of instructions is searched, the time savings from filling the delay slot will be minimal so stop searching. Increasing values mean more aggressive optimization, making the compile time increase with probably small improvement in exe- cutable run time. max-delay-slot-live-search When trying to fill delay slots, the maximum number of instruc- tions to consider when searching for a block with valid live register information. Increasing this arbitrarily chosen value means more aggressive optimization, increasing the compile time. This parameter should be removed when the delay slot code is rewritten to maintain the control-flow graph. max-gcse-memory The approximate maximum amount of memory that will be allocated in order to perform the global common subexpression elimination optimization. If more memory than specified is required, the optimization will not be done. max-gcse-passes The maximum number of passes of GCSE to run. max-pending-list-length The maximum number of pending dependencies scheduling will allow before flushing the current state and starting over. Large functions with few branches or calls can create exces- sively large lists which needlessly consume memory and resources. max-inline-insns-single Several parameters control the tree inliner used in gcc. This number sets the maximum number of instructions (counted in gcc's internal representation) in a single function that the tree inliner will consider for inlining. This only affects functions declared inline and methods implemented in a class declaration (C++). The default value is 300. max-inline-insns-auto When you use -finline-functions (included in -O3), a lot of functions that would otherwise not be considered for inlining by the compiler will be investigated. To those functions, a different (more restrictive) limit compared to functions declared inline can be applied. The default value is 300. max-inline-insns The tree inliner does decrease the allowable size for single functions to be inlined after we already inlined the number of instructions given here by repeated inlining. This number should be a factor of two or more larger than the single func- tion limit. Higher numbers result in better runtime perfor- mance, but incur higher compile-time resource (CPU time, mem- ory) requirements and result in larger binaries. Very high values are not advisable, as too large binaries may adversely affect runtime performance. The default value is 600. max-inline-slope After exceeding the maximum number of inlined instructions by repeated inlining, a linear function is used to decrease the allowable size for single functions. The slope of that func- tion is the negative reciprocal of the number specified here. The default value is 32. min-inline-insns The repeated inlining is throttled more and more by the linear function after exceeding the limit. To avoid too much throt- tling, a minimum for this function is specified here to allow repeated inlining for very small functions even when a lot of repeated inlining already has been done. The default value is 130. max-inline-insns-rtl For languages that use the RTL inliner (this happens at a later stage than tree inlining), you can set the maximum allowable size (counted in RTL instructions) for the RTL inliner with this parameter. The default value is 600. max-unrolled-insns The maximum number of instructions that a loop should have if that loop is unrolled, and if the loop is unrolled, it deter- mines how many times the loop code is unrolled. hot-bb-count-fraction Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be consid- ered hot. hot-bb-frequency-fraction Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be consid- ered hot tracer-dynamic-coverage tracer-dynamic-coverage-feedback This value is used to limit superblock formation once the given percentage of executed instructions is covered. This limits unnecessary code size expansion. The tracer-dynamic-coverage-feedback is used only when profile feedback is available. The real profiles (as opposed to stati- cally estimated ones) are much less balanced allowing the threshold to be larger value. tracer-max-code-growth Stop tail duplication once code growth has reached given per- centage. This is rather hokey argument, as most of the dupli- cates will be eliminated later in cross jumping, so it may be set to much higher values than is the desired code growth. tracer-min-branch-ratio Stop reverse growth when the reverse probability of best edge is less than this threshold (in percent). tracer-min-branch-ratio tracer-min-branch-ratio-feedback Stop forward growth if the best edge do have probability lower than this threshold. Similarly to tracer-dynamic-coverage two values are present, one for compilation for profile feedback and one for compila- tion without. The value for compilation with profile feedback needs to be more conservative (higher) in order to make tracer effective. ggc-min-expand GCC uses a garbage collector to manage its own memory alloca- tion. This parameter specifies the minimum percentage by which the garbage collector's heap should be allowed to expand between collections. Tuning this may improve compilation speed; it has no effect on code generation. The default is 30% + 70% * (RAM/1GB) with an upper bound of 100% when RAM >= 1GB. If "getrlimit" is available, the notion of "RAM" is the smallest of actual RAM, RLIMIT_RSS, RLIMIT_DATA and RLIMIT_AS. If GCC is not able to calculate RAM on a par- ticular platform, the lower bound of 30% is used. Setting this parameter and ggc-min-heapsize to zero causes a full collection to occur at every opportunity. This is extremely slow, but can be useful for debugging. ggc-min-heapsize Minimum size of the garbage collector's heap before it begins bothering to collect garbage. The first collection occurs after the heap expands by ggc-min-expand% beyond ggc-min-heap- size. Again, tuning this may improve compilation speed, and has no effect on code generation. The default is RAM/8, with a lower bound of 4096 (four megabytes) and an upper bound of 131072 (128 megabytes). If "getrlimit" is available, the notion of "RAM" is the smallest of actual RAM, RLIMIT_RSS, RLIMIT_DATA and RLIMIT_AS. If GCC is not able to calculate RAM on a particular platform, the lower bound is used. Setting this parameter very large effec- tively disables garbage collection. Setting this parameter and ggc-min-expand to zero causes a full collection to occur at every opportunity. Options Controlling the Preprocessor These options control the C preprocessor, which is run on each C source file before actual compilation. If you use the -E option, nothing is done except preprocessing. Some of these options make sense only together with -E because they cause the preprocessor output to be unsuitable for actual compilation. You can use -Wp,option to bypass the compiler driver and pass option directly through to the preprocessor. If option contains commas, it is split into multiple options at the commas. However, many options are modified, translated or interpreted by the compiler driver before being passed to the preprocessor, and -Wp forcibly bypasses this phase. The preprocessor's direct interface is undocumented and subject to change, so whenever possible you should avoid using -Wp and let the driver han- dle the options instead. -D name Predefine name as a macro, with definition "1". -D name=definition Predefine name as a macro, with definition definition. There are no restrictions on the contents of definition, but if you are invoking the preprocessor from a shell or shell-like program you may need to use the shell's quoting syntax to protect characters such as spaces that have a meaning in the shell syntax. If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals sign (if any). Parentheses are meaningful to most shells, so you will need to quote the option. With sh and csh, -D'name(args...)=definition' works. -D and -U options are processed in the order they are given on the command line. All -imacros file and -include file options are pro- cessed after all -D and -U options. -U name Cancel any previous definition of name, either built in or provided with a -D option. -undef Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined. -I dir Add the directory dir to the list of directories to be searched for header files. Directories named by -I are searched before the standard system include directories. If the directory dir is a standard system include directory, the option is ignored to ensure that the default search order for system directories and the spe- cial treatment of system headers are not defeated . -o file Write output to file. This is the same as specifying file as the second non-option argument to cpp. gcc has a different interpreta- tion of a second non-option argument, so you must use -o to specify the output file. -Wall Turns on all optional warnings which are desirable for normal code. At present this is -Wcomment and -Wtrigraphs. Note that many of the preprocessor's warnings are on by default and have no options to control them. -Wcomment -Wcomments Warn whenever a comment-start sequence /* appears in a /* comment, or whenever a backslash-newline appears in a // comment. (Both forms have the same effect.) -Wtrigraphs Warn if any trigraphs are encountered. This option used to take effect only if -trigraphs was also specified, but now works inde- pendently. Warnings are not given for trigraphs within comments, as they do not affect the meaning of the program. -Wtraditional Warn about certain constructs that behave differently in tradi- tional and ISO C. Also warn about ISO C constructs that have no traditional C equivalent, and problematic constructs which should be avoided. -Wimport Warn the first time #import is used. -Wundef Warn whenever an identifier which is not a macro is encountered in an #if directive, outside of defined. Such identifiers are replaced with zero. -Wunused-macros Warn about macros defined in the main file that are unused. A macro is used if it is expanded or tested for existence at least once. The preprocessor will also warn if the macro has not been used at the time it is redefined or undefined. Built-in macros, macros defined on the command line, and macros defined in include files are not warned about. Note: If a macro is actually used, but only used in skipped condi- tional blocks, then CPP will report it as unused. To avoid the warning in such a case, you might improve the scope of the macro's definition by, for example, moving it into the first skipped block. Alternatively, you could provide a dummy use with something like: #if defined the_macro_causing_the_warning #endif -Wendif-labels Warn whenever an #else or an #endif are followed by text. This usually happens in code of the form #if FOO ... #else FOO ... #endif FOO The second and third "FOO" should be in comments, but often are not in older programs. This warning is on by default. -Werror Make all warnings into hard errors. Source code which triggers warnings will be rejected. -Wsystem-headers Issue warnings for code in system headers. These are normally unhelpful in finding bugs in your own code, therefore suppressed. If you are responsible for the system library, you may want to see them. -w Suppress all warnings, including those which GNU CPP issues by default. -pedantic Issue all the mandatory diagnostics listed in the C standard. Some of them are left out by default, since they trigger frequently on harmless code. -pedantic-errors Issue all the mandatory diagnostics, and make all mandatory diag- nostics into errors. This includes mandatory diagnostics that GCC issues without -pedantic but treats as warnings. -M Instead of outputting the result of preprocessing, output a rule suitable for make describing the dependencies of the main source file. The preprocessor outputs one make rule containing the object file name for that source file, a colon, and the names of all the included files, including those coming from -include or -imacros command line options. Unless specified explicitly (with -MT or -MQ), the object file name consists of the basename of the source file with any suffix replaced with object file suffix. If there are many included files then the rule is split into several lines using \-newline. The rule has no commands. This option does not suppress the preprocessor's debug output, such as -dM. To avoid mixing such debug output with the dependency rules you should explicitly specify the dependency output file with -MF, or use an environment variable like DEPENDENCIES_OUTPUT. Debug output will still be sent to the regular output stream as normal. Passing -M to the driver implies -E, and suppresses warnings with an implicit -w. -MM Like -M but do not mention header files that are found in system header directories, nor header files that are included, directly or indirectly, from such a header. This implies that the choice of angle brackets or double quotes in an #include directive does not in itself determine whether that header will appear in -MM dependency output. This is a slight change in semantics from GCC versions 3.0 and earlier. -MF file @anchor{-MF} When used with -M or -MM, specifies a file to write the dependencies to. If no -MF switch is given the preprocessor sends the rules to the same place it would have sent preprocessed output. When used with the driver options -MD or -MMD, -MF overrides the default dependency output file. -MG In conjunction with an option such as -M requesting dependency gen- eration, -MG assumes missing header files are generated files and adds them to the dependency list without raising an error. The dependency filename is taken directly from the "#include" directive without prepending any path. -MG also suppresses preprocessed out- put, as a missing header file renders this useless. This feature is used in automatic updating of makefiles. -MP This option instructs CPP to add a phony target for each dependency other than the main file, causing each to depend on nothing. These dummy rules work around errors make gives if you remove header files without updating the Makefile to match. This is typical output: test.o: test.c test.h test.h: -MT target Change the target of the rule emitted by dependency generation. By default CPP takes the name of the main input file, including any path, deletes any file suffix such as .c, and appends the plat- form's usual object suffix. The result is the target. An -MT option will set the target to be exactly the string you specify. If you want multiple targets, you can specify them as a single argument to -MT, or use multiple -MT options. For example, -MT '$(objpfx)foo.o' might give $(objpfx)foo.o: foo.c -MQ target Same as -MT, but it quotes any characters which are special to Make. -MQ '$(objpfx)foo.o' gives $$(objpfx)foo.o: foo.c The default target is automatically quoted, as if it were given with -MQ. -MD -MD is equivalent to -M -MF file, except that -E is not implied. The driver determines file based on whether an -o option is given. If it is, the driver uses its argument but with a suffix of .d, otherwise it take the basename of the input file and applies a .d suffix. If -MD is used in conjunction with -E, any -o switch is understood to specify the dependency output file (but @pxref{-MF}), but if used without -E, each -o is understood to specify a target object file. Since -E is not implied, -MD can be used to generate a dependency output file as a side-effect of the compilation process. -MMD Like -MD except mention only user header files, not system -header files. -x c -x c++ -x objective-c -x assembler-with-cpp Specify the source language: C, C++, Objective-C, or assembly. This has nothing to do with standards conformance or extensions; it merely selects which base syntax to expect. If you give none of these options, cpp will deduce the language from the extension of the source file: .c, .cc, .m, or .S. Some other common extensions for C++ and assembly are also recognized. If cpp does not recog- nize the extension, it will treat the file as C; this is the most generic mode. Note: Previous versions of cpp accepted a -lang option which selected both the language and the standards conformance level. This option has been removed, because it conflicts with the -l option. -std=standard -ansi Specify the standard to which the code should conform. Currently CPP knows about C and C++ standards; others may be added in the future. standard may be one of: ""iso9899:1990"" ""c89"" The ISO C standard from 1990. c89 is the customary shorthand for this version of the standard. The -ansi option is equivalent to -std=c89. ""iso9899:199409"" The 1990 C standard, as amended in 1994. ""iso9899:1999"" ""c99"" ""iso9899:199x"" ""c9x"" The revised ISO C standard, published in December 1999. Before publication, this was known as C9X. ""gnu89"" The 1990 C standard plus GNU extensions. This is the default. ""gnu99"" ""gnu9x"" The 1999 C standard plus GNU extensions. ""c++98"" The 1998 ISO C++ standard plus amendments. ""gnu++98"" The same as -std=c++98 plus GNU extensions. This is the default for C++ code. -I- Split the include path. Any directories specified with -I options before -I- are searched only for headers requested with "#include "file""; they are not searched for "#include <file>". If additional directories are specified with -I options after the -I-, those directories are searched for all #include directives. In addition, -I- inhibits the use of the directory of the current file directory as the first search directory for "#include "file"". -nostdinc Do not search the standard system directories for header files. Only the directories you have specified with -I options (and the directory of the current file, if appropriate) are searched. -nostdinc++ Do not search for header files in the C++-specific standard direc- tories, but do still search the other standard directories. (This option is used when building the C++ library.) -include file Process file as if "#include "file"" appeared as the first line of the primary source file. However, the first directory searched for file is the preprocessor's working directory instead of the direc- tory containing the main source file. If not found there, it is searched for in the remainder of the "#include "..."" search chain as normal. If multiple -include options are given, the files are included in the order they appear on the command line. -imacros file Exactly like -include, except that any output produced by scanning file is thrown away. Macros it defines remain defined. This allows you to acquire all the macros from a header without also processing its declarations. All files specified by -imacros are processed before all files specified by -include. -idirafter dir Search dir for header files, but do it after all directories speci- fied with -I and the standard system directories have been exhausted. dir is treated as a system include directory. -iprefix prefix Specify prefix as the prefix for subsequent -iwithprefix options. If the prefix represents a directory, you should include the final /. -iwithprefix dir -iwithprefixbefore dir Append dir to the prefix specified previously with -iprefix, and add the resulting directory to the include search path. -iwithpre- fixbefore puts it in the same place -I would; -iwithprefix puts it where -idirafter would. Use of these options is discouraged. -isystem dir Search dir for header files, after all directories specified by -I but before the standard system directories. Mark it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. -fpreprocessed Indicate to the preprocessor that the input file has already been preprocessed. This suppresses things like macro expansion, tri- graph conversion, escaped newline splicing, and processing of most directives. The preprocessor still recognizes and removes com- ments, so that you can pass a file preprocessed with -C to the com- piler without problems. In this mode the integrated preprocessor is little more than a tokenizer for the front ends. -fpreprocessed is implicit if the input file has one of the exten- sions .i, .ii or .mi. These are the extensions that GCC uses for preprocessed files created by -save-temps. -ftabstop=width Set the distance between tab stops. This helps the preprocessor report correct column numbers in warnings or errors, even if tabs appear on the line. If the value is less than 1 or greater than 100, the option is ignored. The default is 8. -fno-show-column Do not print column numbers in diagnostics. This may be necessary if diagnostics are being scanned by a program that does not under- stand the column numbers, such as dejagnu. -A predicate=answer Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form -A predicate(answer), which is still supported, because it does not use shell special characters. -A -predicate=answer Cancel an assertion with the predicate predicate and answer answer. -dCHARS CHARS is a sequence of one or more of the following characters, and must not be preceded by a space. Other characters are interpreted by the compiler proper, or reserved for future versions of GCC, and so are silently ignored. If you specify characters whose behavior conflicts, the result is undefined. M Instead of the normal output, generate a list of #define direc- tives for all the macros defined during the execution of the preprocessor, including predefined macros. This gives you a way of finding out what is predefined in your version of the preprocessor. Assuming you have no file foo.h, the command touch foo.h; cpp -dM foo.h will show all the predefined macros. D Like M except in two respects: it does not include the prede- fined macros, and it outputs both the #define directives and the result of preprocessing. Both kinds of output go to the standard output file. N Like D, but emit only the macro names, not their expansions. I Output #include directives in addition to the result of prepro- cessing. -P Inhibit generation of linemarkers in the output from the preproces- sor. This might be useful when running the preprocessor on some- thing that is not C code, and will be sent to a program which might be confused by the linemarkers. -C Do not discard comments. All comments are passed through to the output file, except for comments in processed directives, which are deleted along with the directive. You should be prepared for side effects when using -C; it causes the preprocessor to treat comments as tokens in their own right. For example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordi- nary source line, since the first token on the line is no longer a #. -CC Do not discard comments, including during macro expansion. This is like -C, except that comments contained within macros are also passed through to the output file where the macro is expanded. In addition to the side-effects of the -C option, the -CC option causes all C++-style comments inside a macro to be converted to C- style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line. The -CC option is generally used to support lint comments. -traditional-cpp Try to imitate the behavior of old-fashioned C preprocessors, as opposed to ISO C preprocessors. -trigraphs Process trigraph sequences. These are three-character sequences, all starting with ??, that are defined by ISO C to stand for single characters. For example, ??/ stands for \, so '??/n' is a charac- ter constant for a newline. By default, GCC ignores trigraphs, but in standard-conforming modes it converts them. See the -std and -ansi options. The nine trigraphs and their replacements are Trigraph: ??( ??) ??< ??> ??= ??/ ??' ??! ??- Replacement: [ ] { } # \ ^ | ~ -remap Enable special code to work around file systems which only permit very short file names, such as MS-DOS. --help --target-help Print text describing all the command line options instead of pre- processing anything. -v Verbose mode. Print out GNU CPP's version number at the beginning of execution, and report the final form of the include path. -H Print the name of each header file used, in addition to other nor- mal activities. Each name is indented to show how deep in the #include stack it is. -version --version Print out GNU CPP's version number. With one dash, proceed to pre- process as normal. With two dashes, exit immediately. Passing Options to the Assembler You can pass options to the assembler. -Wa,option Pass option as an option to the assembler. If option contains com- mas, it is split into multiple options at the commas. Options for Linking These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step. object-file-name A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file contents.) If linking is done, these object files are used as input to the linker. -c -S -E If any of these options is used, then the linker is not run, and object file names should not be used as arguments. -llibrary -l library Search the library named library when linking. (The second alter- native with the library as a separate argument is only for POSIX compliance and is not recommended.) It makes a difference where in the command you write this option; the linker searches and processes libraries and object files in the order they are specified. Thus, foo.o -lz bar.o searches library z after file foo.o but before bar.o. If bar.o refers to functions in z, those functions may not be loaded. The linker searches a standard list of directories for the library, which is actually a file named liblibrary.a. The linker then uses this file as if it had been specified precisely by name. The directories searched include several standard system directo- ries plus any that you specify with -L. Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is found is an ordinary object file, it is linked in the usual fash- ion. The only difference between using an -l option and specifying a file name is that -l surrounds library with lib and .a and searches several directories. -lobjc You need this special case of the -l option in order to link an Objective-C program. -nostartfiles Do not use the standard system startup files when linking. The standard system libraries are used normally, unless -nostdlib or -nodefaultlibs is used. -nodefaultlibs Do not use the standard system libraries when linking. Only the libraries you specify will be passed to the linker. The standard startup files are used normally, unless -nostartfiles is used. The compiler may generate calls to memcmp, memset, and memcpy for Sys- tem V (and ISO C) environments or to bcopy and bzero for BSD envi- ronments. These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified. -nostdlib Do not use the standard system startup files or libraries when linking. No startup files and only the libraries you specify will be passed to the linker. The compiler may generate calls to mem- cmp, memset, and memcpy for System V (and ISO C) environments or to bcopy and bzero for BSD environments. These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified. One of the standard libraries bypassed by -nostdlib and -nodefault- libs is libgcc.a, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. In most cases, you need libgcc.a even when you want to avoid other standard libraries. In other words, when you specify -nostdlib or -nodefaultlibs you should usually specify -lgcc as well. This ensures that you have no unresolved references to internal GCC library subroutines. (For example, __main, used to ensure C++ con- structors will be called.) -s Remove all symbol table and relocation information from the exe- cutable. -static On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect. -shared Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. For predictable results, you must also specify the same set of options that were used to generate code (-fpic, -fPIC, or model suboptions) when you specify this option.[1] -shared-libgcc -static-libgcc On systems that provide libgcc as a shared library, these options force the use of either the shared or static version respectively. If no shared version of libgcc was built when the compiler was con- figured, these options have no effect. There are several situations in which an application should use the shared libgcc instead of the static version. The most common of these is when the application wishes to throw and catch exceptions across different shared libraries. In that case, each of the libraries as well as the application itself should use the shared libgcc. Therefore, the G++ and GCJ drivers automatically add -shared-libgcc whenever you build a shared library or a main executable, because C++ and Java programs typically use exceptions, so this is the right thing to do. If, instead, you use the GCC driver to create shared libraries, you may find that they will not always be linked with the shared libgcc. If GCC finds, at its configuration time, that you have a GNU linker that does not support option --eh-frame-hdr, it will link the shared version of libgcc into shared libraries by default. Otherwise, it will take advantage of the linker and optimize away the linking with the shared version of libgcc, linking with the static version of libgcc by default. This allows exceptions to propagate through such shared libraries, without incurring reloca- tion costs at library load time. However, if a library or main executable is supposed to throw or catch exceptions, you must link it using the G++ or GCJ driver, as appropriate for the languages used in the program, or using the option -shared-libgcc, such that it is linked with the shared libgcc. -symbolic Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link editor option -Xlinker -z -Xlinker defs). Only a few systems sup- port this option. -Xlinker option Pass option as an option to the linker. You can use this to supply system-specific linker options which GCC does not know how to rec- ognize. If you want to pass an option that takes an argument, you must use -Xlinker twice, once for the option and once for the argument. For example, to pass -assert definitions, you must write -Xlinker -assert -Xlinker definitions. It does not work to write -Xlinker "-assert definitions", because this passes the entire string as a single argument, which is not what the linker expects. -Wl,option Pass option as an option to the linker. If option contains commas, it is split into multiple options at the commas. -u symbol Pretend the symbol symbol is undefined, to force linking of library modules to define it. You can use -u multiple times with different symbols to force loading of additional library modules. Options for Directory Search These options specify directories to search for header files, for libraries and for parts of the compiler: -Idir Add the directory dir to the head of the list of directories to be searched for header files. This can be used to override a system header file, substituting your own version, since these directories are searched before the system header file directories. However, you should not use this option to add directories that contain ven- dor-supplied system header files (use -isystem for that). If you use more than one -I option, the directories are scanned in left- to-right order; the standard system directories come after. If a standard system include directory, or a directory specified with -isystem, is also specified with -I, the -I option will be ignored. The directory will still be searched but as a system directory at its normal position in the system include chain. This is to ensure that GCC's procedure to fix buggy system headers and the ordering for the include_next directive are not inadvertently changed. If you really need to change the search order for system directories, use the -nostdinc and/or -isystem options. -I- Any directories you specify with -I options before the -I- option are searched only for the case of #include "file"; they are not searched for #include <file>. If additional directories are specified with -I options after the -I-, these directories are searched for all #include directives. (Ordinarily all -I directories are used this way.) In addition, the -I- option inhibits the use of the current direc- tory (where the current input file came from) as the first search directory for #include "file". There is no way to override this effect of -I-. With -I. you can specify searching the directory which was current when the compiler was invoked. That is not exactly the same as what the preprocessor does by default, but it is often satisfactory. -I- does not inhibit the use of the standard system directories for header files. Thus, -I- and -nostdinc are independent. -Ldir Add directory dir to the list of directories to be searched for -l. -Bprefix This option specifies where to find the executables, libraries, include files, and data files of the compiler itself. The compiler driver program runs one or more of the subprograms cpp, cc1, as and ld. It tries prefix as a prefix for each program it tries to run, both with and without machine/version/. For each subprogram to be run, the compiler driver first tries the -B prefix, if any. If that name is not found, or if -B was not specified, the driver tries two standard prefixes, which are /usr/lib/gcc/ and /usr/local/lib/gcc-lib/. If neither of those results in a file name that is found, the unmodified program name is searched for using the directories specified in your PATH envi- ronment variable. The compiler will check to see if the path provided by the -B refers to a directory, and if necessary it will add a directory separator character at the end of the path. -B prefixes that effectively specify directory names also apply to libraries in the linker, because the compiler translates these options into -L options for the linker. They also apply to includes files in the preprocessor, because the compiler translates these options into -isystem options for the preprocessor. In this case, the compiler appends include to the prefix. The run-time support file libgcc.a can also be searched for using the -B prefix, if needed. If it is not found there, the two stan- dard prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means. Another way to specify a prefix much like the -B prefix is to use the environment variable GCC_EXEC_PREFIX. As a special kludge, if the path provided by -B is [dir/]stageN/, where N is a number in the range 0 to 9, then it will be replaced by [dir/]include. This is to help with boot-strapping the com- piler. -specs=file Process file after the compiler reads in the standard specs file, in order to override the defaults that the gcc driver program uses when determining what switches to pass to cc1, cc1plus, as, ld, etc. More than one -specs=file can be specified on the command line, and they are processed in order, from left to right. Specifying Target Machine and Compiler Version The usual way to run GCC is to run the executable called gcc, or <machine>-gcc when cross-compiling, or <machine>-gcc-<version> to run a version other than the one that was installed last. Sometimes this is inconvenient, so GCC provides options that will switch to another cross-compiler or version. -b machine The argument machine specifies the target machine for compilation. The value to use for machine is the same as was specified as the machine type when configuring GCC as a cross-compiler. For exam- ple, if a cross-compiler was configured with configure i386v, mean- ing to compile for an 80386 running System V, then you would spec- ify -b i386v to run that cross compiler. -V version The argument version specifies which version of GCC to run. This is useful when multiple versions are installed. For example, ver- sion might be 2.0, meaning to run GCC version 2.0. The -V and -b options work by running the <machine>-gcc-<version> exe- cutable, so there's no real reason to use them if you can just run that directly. Hardware Models and Configurations Earlier we discussed the standard option -b which chooses among differ- ent installed compilers for completely different target machines, such as VAX vs. 68000 vs. 80386. In addition, each of these target machine types can have its own spe- cial options, starting with -m, to choose among various hardware models or configurations---for example, 68010 vs 68020, floating coprocessor or none. A single installed version of the compiler can compile for any model or configuration, according to the options specified. Some configurations of the compiler also support additional special options, usually for compatibility with other compilers on the same platform. These options are defined by the macro "TARGET_SWITCHES" in the machine description. The default for the options is also defined by that macro, which enables you to change the defaults. M680x0 Options These are the -m options defined for the 68000 series. The default values for these options depends on which style of 68000 was selected when the compiler was configured; the defaults for the most common choices are given below. -m68000 -mc68000 Generate output for a 68000. This is the default when the compiler is configured for 68000-based systems. Use this option for microcontrollers with a 68000 or EC000 core, including the 68008, 68302, 68306, 68307, 68322, 68328 and 68356. -m68020 -mc68020 Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems. -m68881 Generate output containing 68881 instructions for floating point. This is the default for most 68020 systems unless --nfp was speci- fied when the compiler was configured. -m68030 Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems. -m68040 Generate output for a 68040. This is the default when the compiler is configured for 68040-based systems. This option inhibits the use of 68881/68882 instructions that have to be emulated by software on the 68040. Use this option if your 68040 does not have code to emulate those instructions. -m68060 Generate output for a 68060. This is the default when the compiler is configured for 68060-based systems. This option inhibits the use of 68020 and 68881/68882 instructions that have to be emulated by software on the 68060. Use this option if your 68060 does not have code to emulate those instructions. -mcpu32 Generate output for a CPU32. This is the default when the compiler is configured for CPU32-based systems. Use this option for microcontrollers with a CPU32 or CPU32+ core, including the 68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349 and 68360. -m5200 Generate output for a 520X ``coldfire'' family cpu. This is the default when the compiler is configured for 520X-based systems. Use this option for microcontroller with a 5200 core, including the MCF5202, MCF5203, MCF5204 and MCF5202. -m68020-40 Generate output for a 68040, without using any of the new instruc- tions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68040. -m68020-60 Generate output for a 68060, without using any of the new instruc- tions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68060. -mfpa Generate output containing Sun FPA instructions for floating point. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not available for all m68k tar- gets. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets m68k-*-aout and m68k-*-coff do provide software floating point support. -mshort Consider type "int" to be 16 bits wide, like "short int". -mnobitfield Do not use the bit-field instructions. The -m68000, -mcpu32 and -m5200 options imply -mnobitfield. -mbitfield Do use the bit-field instructions. The -m68020 option implies -mbitfield. This is the default if you use a configuration designed for a 68020. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "rtd" instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries com- piled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) The "rtd" instruction is supported by the 68010, 68020, 68030, 68040, 68060 and CPU32 processors, but not by the 68000 or 5200. -malign-int -mno-align-int Control whether GCC aligns "int", "long", "long long", "float", "double", and "long double" variables on a 32-bit boundary (-malign-int) or a 16-bit boundary (-mno-align-int). Aligning variables on 32-bit boundaries produces code that runs somewhat faster on processors with 32-bit busses at the expense of more mem- ory. Warning: if you use the -malign-int switch, GCC will align struc- tures containing the above types differently than most published application binary interface specifications for the m68k. -mpcrel Use the pc-relative addressing mode of the 68000 directly, instead of using a global offset table. At present, this option implies -fpic, allowing at most a 16-bit offset for pc-relative addressing. -fPIC is not presently supported with -mpcrel, though this could be supported for 68020 and higher processors. -mno-strict-align -mstrict-align Do not (do) assume that unaligned memory references will be handled by the system. M68hc1x Options These are the -m options defined for the 68hc11 and 68hc12 microcon- trollers. The default values for these options depends on which style of microcontroller was selected when the compiler was configured; the defaults for the most common choices are given below. -m6811 -m68hc11 Generate output for a 68HC11. This is the default when the com- piler is configured for 68HC11-based systems. -m6812 -m68hc12 Generate output for a 68HC12. This is the default when the com- piler is configured for 68HC12-based systems. -m68S12 -m68hcs12 Generate output for a 68HCS12. -mauto-incdec Enable the use of 68HC12 pre and post auto-increment and auto- decrement addressing modes. -minmax -nominmax Enable the use of 68HC12 min and max instructions. -mlong-calls -mno-long-calls Treat all calls as being far away (near). If calls are assumed to be far away, the compiler will use the "call" instruction to call a function and the "rtc" instruction for returning. -mshort Consider type "int" to be 16 bits wide, like "short int". -msoft-reg-count=count Specify the number of pseudo-soft registers which are used for the code generation. The maximum number is 32. Using more pseudo-soft register may or may not result in better code depending on the pro- gram. The default is 4 for 68HC11 and 2 for 68HC12. VAX Options These -m options are defined for the VAX: -munix Do not output certain jump instructions ("aobleq" and so on) that the Unix assembler for the VAX cannot handle across long ranges. -mgnu Do output those jump instructions, on the assumption that you will assemble with the GNU assembler. -mg Output code for g-format floating point numbers instead of d-for- mat. SPARC Options These -m switches are supported on the SPARC: -mno-app-regs -mapp-regs Specify -mapp-regs to generate output using the global registers 2 through 4, which the SPARC SVR4 ABI reserves for applications. This is the default. To be fully SVR4 ABI compliant at the cost of some performance loss, specify -mno-app-regs. You should compile libraries and sys- tem software with this option. -mfpu -mhard-float Generate output containing floating point instructions. This is the default. -mno-fpu -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not available for all SPARC tar- gets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets sparc-*-aout and sparclite-*-* do provide software floating point support. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. -mhard-quad-float Generate output containing quad-word (long double) floating point instructions. -msoft-quad-float Generate output containing library calls for quad-word (long dou- ble) floating point instructions. The functions called are those specified in the SPARC ABI. This is the default. As of this writing, there are no sparc implementations that have hardware support for the quad-word floating point instructions. They all invoke a trap handler for one of these instructions, and then the trap handler emulates the effect of the instruction. Because of the trap handler overhead, this is much slower than calling the ABI library routines. Thus the -msoft-quad-float option is the default. -mno-flat -mflat With -mflat, the compiler does not generate save/restore instruc- tions and will use a ``flat'' or single register window calling convention. This model uses %i7 as the frame pointer and is com- patible with the normal register window model. Code from either may be intermixed. The local registers and the input registers (0--5) are still treated as ``call saved'' registers and will be saved on the stack as necessary. With -mno-flat (the default), the compiler emits save/restore instructions (except for leaf functions) and is the normal mode of operation. -mno-unaligned-doubles -munaligned-doubles Assume that doubles have 8 byte alignment. This is the default. With -munaligned-doubles, GCC assumes that doubles have 8 byte alignment only if they are contained in another type, or if they have an absolute address. Otherwise, it assumes they have 4 byte alignment. Specifying this option avoids some rare compatibility problems with code generated by other compilers. It is not the default because it results in a performance loss, especially for floating point code. -mno-faster-structs -mfaster-structs With -mfaster-structs, the compiler assumes that structures should have 8 byte alignment. This enables the use of pairs of "ldd" and "std" instructions for copies in structure assignment, in place of twice as many "ld" and "st" pairs. However, the use of this changed alignment directly violates the SPARC ABI. Thus, it's intended only for use on targets where the developer acknowledges that their resulting code will not be directly in line with the rules of the ABI. -mimpure-text -mimpure-text, used in addition to -shared, tells the compiler to not pass -z text to the linker when linking a shared object. Using this option, you can link position-dependent code into a shared object. -mimpure-text suppresses the ``relocations remain against allocat- able but non-writable sections'' linker error message. However, the necessary relocations will trigger copy-on-write, and the shared object is not actually shared across processes. Instead of using -mimpure-text, you should compile all source code with -fpic or -fPIC. This option is only available on SunOS and Solaris. -mv8 -msparclite These two options select variations on the SPARC architecture. By default (unless specifically configured for the Fujitsu SPAR- Clite), GCC generates code for the v7 variant of the SPARC archi- tecture. -mv8 will give you SPARC v8 code. The only difference from v7 code is that the compiler emits the integer multiply and integer divide instructions which exist in SPARC v8 but not in SPARC v7. -msparclite will give you SPARClite code. This adds the integer multiply, integer divide step and scan ("ffs") instructions which exist in SPARClite but not in SPARC v7. These options are deprecated and will be deleted in a future GCC release. They have been replaced with -mcpu=xxx. -mcypress -msupersparc These two options select the processor for which the code is opti- mized. With -mcypress (the default), the compiler optimizes code for the Cypress CY7C602 chip, as used in the SPARCStation/SPARCServer 3xx series. This is also appropriate for the older SPARCStation 1, 2, IPX etc. With -msupersparc the compiler optimizes code for the SuperSPARC cpu, as used in the SPARCStation 10, 1000 and 2000 series. This flag also enables use of the full SPARC v8 instruction set. These options are deprecated and will be deleted in a future GCC release. They have been replaced with -mcpu=xxx. -mcpu=cpu_type Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type are v7, cypress, v8, supersparc, sparclite, hypersparc, sparclite86x, f930, f934, sparclet, tsc701, v9, ultrasparc, and ultrasparc3. Default instruction scheduling parameters are used for values that select an architecture and not an implementation. These are v7, v8, sparclite, sparclet, v9. Here is a list of each supported architecture and their supported implementations. v7: cypress v8: supersparc, hypersparc sparclite: f930, f934, sparclite86x sparclet: tsc701 v9: ultrasparc, ultrasparc3 -mtune=cpu_type Set the instruction scheduling parameters for machine type cpu_type, but do not set the instruction set or register set that the option -mcpu=cpu_type would. The same values for -mcpu=cpu_type can be used for -mtune=cpu_type, but the only useful values are those that select a particular cpu implementation. Those are cypress, supersparc, hypersparc, f930, f934, sparclite86x, tsc701, ultrasparc, and ultrasparc3. These -m switches are supported in addition to the above on the SPAR- CLET processor. -mlittle-endian Generate code for a processor running in little-endian mode. -mlive-g0 Treat register "%g0" as a normal register. GCC will continue to clobber it as necessary but will not assume it always reads as 0. -mbroken-saverestore Generate code that does not use non-trivial forms of the "save" and "restore" instructions. Early versions of the SPARCLET processor do not correctly handle "save" and "restore" instructions used with arguments. They correctly handle them used without arguments. A "save" instruction used without arguments increments the current window pointer but does not allocate a new stack frame. It is assumed that the window overflow trap handler will properly handle this case as will interrupt handlers. These -m switches are supported in addition to the above on SPARC V9 processors in 64-bit environments. -mlittle-endian Generate code for a processor running in little-endian mode. It is only available for a few configurations and most notably not on Solaris. -m32 -m64 Generate code for a 32-bit or 64-bit environment. The 32-bit envi- ronment sets int, long and pointer to 32 bits. The 64-bit environ- ment sets int to 32 bits and long and pointer to 64 bits. -mcmodel=medlow Generate code for the Medium/Low code model: the program must be linked in the low 32 bits of the address space. Pointers are 64 bits. Programs can be statically or dynamically linked. -mcmodel=medmid Generate code for the Medium/Middle code model: the program must be linked in the low 44 bits of the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Pointers are 64 bits. -mcmodel=medany Generate code for the Medium/Anywhere code model: the program may be linked anywhere in the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Pointers are 64 bits. -mcmodel=embmedany Generate code for the Medium/Anywhere code model for embedded sys- tems: assume a 32-bit text and a 32-bit data segment, both starting anywhere (determined at link time). Register %g4 points to the base of the data segment. Pointers are still 64 bits. Programs are statically linked, PIC is not supported. -mstack-bias -mno-stack-bias With -mstack-bias, GCC assumes that the stack pointer, and frame pointer if present, are offset by -2047 which must be added back when making stack frame references. Otherwise, assume no such off- set is present. ARM Options These -m options are defined for Advanced RISC Machines (ARM) architec- tures: -mapcs-frame Generate a stack frame that is compliant with the ARM Procedure Call Standard for all functions, even if this is not strictly nec- essary for correct execution of the code. Specifying -fomit-frame- pointer with this option will cause the stack frames not to be gen- erated for leaf functions. The default is -mno-apcs-frame. -mapcs This is a synonym for -mapcs-frame. -mapcs-26 Generate code for a processor running with a 26-bit program counter, and conforming to the function calling standards for the APCS 26-bit option. This option replaces the -m2 and -m3 options of previous releases of the compiler. -mapcs-32 Generate code for a processor running with a 32-bit program counter, and conforming to the function calling standards for the APCS 32-bit option. This option replaces the -m6 option of previ- ous releases of the compiler. -mthumb-interwork Generate code which supports calling between the ARM and Thumb instruction sets. Without this option the two instruction sets cannot be reliably used inside one program. The default is -mno- thumb-interwork, since slightly larger code is generated when -mthumb-interwork is specified. -mno-sched-prolog Prevent the reordering of instructions in the function prolog, or the merging of those instruction with the instructions in the func- tion's body. This means that all functions will start with a rec- ognizable set of instructions (or in fact one of a choice from a small set of different function prologues), and this information can be used to locate the start if functions inside an executable piece of code. The default is -msched-prolog. -mhard-float Generate output containing floating point instructions. This is the default. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not available for all ARM targets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. -mlittle-endian Generate code for a processor running in little-endian mode. This is the default for all standard configurations. -mbig-endian Generate code for a processor running in big-endian mode; the default is to compile code for a little-endian processor. -mwords-little-endian This option only applies when generating code for big-endian pro- cessors. Generate code for a little-endian word order but a big- endian byte order. That is, a byte order of the form 32107654. Note: this option should only be used if you require compatibility with code for big-endian ARM processors generated by versions of the compiler prior to 2.8. -malignment-traps Generate code that will not trap if the MMU has alignment traps enabled. On ARM architectures prior to ARMv4, there were no instructions to access half-word objects stored in memory. How- ever, when reading from memory a feature of the ARM architecture allows a word load to be used, even if the address is unaligned, and the processor core will rotate the data as it is being loaded. This option tells the compiler that such misaligned accesses will cause a MMU trap and that it should instead synthesize the access as a series of byte accesses. The compiler can still use word accesses to load half-word data if it knows that the address is aligned to a word boundary. This option is ignored when compiling for ARM architecture 4 or later, since these processors have instructions to directly access half-word objects in memory. -mno-alignment-traps Generate code that assumes that the MMU will not trap unaligned accesses. This produces better code when the target instruction set does not have half-word memory operations (i.e. implementations prior to ARMv4). Note that you cannot use this option to access unaligned word objects, since the processor will only fetch one 32-bit aligned object from memory. The default setting for most targets is -mno-alignment-traps, since this produces better code when there are no half-word memory instructions available. -mshort-load-bytes -mno-short-load-words These are deprecated aliases for -malignment-traps. -mno-short-load-bytes -mshort-load-words This are deprecated aliases for -mno-alignment-traps. -mcpu=name This specifies the name of the target ARM processor. GCC uses this name to determine what kind of instructions it can emit when gener- ating assembly code. Permissible names are: arm2, arm250, arm3, arm6, arm60, arm600, arm610, arm620, arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700, arm700i, arm710, arm710c, arm7100, arm7500, arm7500fe, arm7tdmi, arm8, strongarm, strongarm110, stron- garm1100, arm8, arm810, arm9, arm9e, arm920, arm920t, arm940t, arm9tdmi, arm10tdmi, arm1020t, xscale. -mtune=name This option is very similar to the -mcpu= option, except that instead of specifying the actual target processor type, and hence restricting which instructions can be used, it specifies that GCC should tune the performance of the code as if the target were of the type specified in this option, but still choosing the instruc- tions that it will generate based on the cpu specified by a -mcpu= option. For some ARM implementations better performance can be obtained by using this option. -march=name This specifies the name of the target ARM architecture. GCC uses this name to determine what kind of instructions it can emit when generating assembly code. This option can be used in conjunction with or instead of the -mcpu= option. Permissible names are: armv2, armv2a, armv3, armv3m, armv4, armv4t, armv5, armv5t, armv5te. -mfpe=number -mfp=number This specifies the version of the floating point emulation avail- able on the target. Permissible values are 2 and 3. -mfp= is a synonym for -mfpe=, for compatibility with older versions of GCC. -mstructure-size-boundary=n The size of all structures and unions will be rounded up to a mul- tiple of the number of bits set by this option. Permissible values are 8 and 32. The default value varies for different toolchains. For the COFF targeted toolchain the default value is 8. Specifying the larger number can produce faster, more efficient code, but can also increase the size of the program. The two values are poten- tially incompatible. Code compiled with one value cannot necessar- ily expect to work with code or libraries compiled with the other value, if they exchange information using structures or unions. -mabort-on-noreturn Generate a call to the function "abort" at the end of a "noreturn" function. It will be executed if the function tries to return. -mlong-calls -mno-long-calls Tells the compiler to perform function calls by first loading the address of the function into a register and then performing a sub- routine call on this register. This switch is needed if the target function will lie outside of the 64 megabyte addressing range of the offset based version of subroutine call instruction. Even if this switch is enabled, not all function calls will be turned into long calls. The heuristic is that static functions, functions which have the short-call attribute, functions that are inside the scope of a #pragma no_long_calls directive and functions whose definitions have already been compiled within the current compilation unit, will not be turned into long calls. The excep- tion to this rule is that weak function definitions, functions with the long-call attribute or the section attribute, and functions that are within the scope of a #pragma long_calls directive, will always be turned into long calls. This feature is not enabled by default. Specifying -mno-long-calls will restore the default behavior, as will placing the function calls within the scope of a #pragma long_calls_off directive. Note these switches have no effect on how the compiler generates code to handle function calls via function pointers. -mnop-fun-dllimport Disable support for the "dllimport" attribute. -msingle-pic-base Treat the register used for PIC addressing as read-only, rather than loading it in the prologue for each function. The run-time system is responsible for initializing this register with an appro- priate value before execution begins. -mpic-register=reg Specify the register to be used for PIC addressing. The default is R10 unless stack-checking is enabled, when R9 is used. -mpoke-function-name Write the name of each function into the text section, directly preceding the function prologue. The generated code is similar to this: t0 .ascii "arm_poke_function_name", 0 .align t1 .word 0xff000000 + (t1 - t0) arm_poke_function_name mov ip, sp stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #4 When performing a stack backtrace, code can inspect the value of "pc" stored at "fp + 0". If the trace function then looks at loca- tion "pc - 12" and the top 8 bits are set, then we know that there is a function name embedded immediately preceding this location and has length "((pc[-3]) & 0xff000000)". -mthumb Generate code for the 16-bit Thumb instruction set. The default is to use the 32-bit ARM instruction set. -mtpcs-frame Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all non-leaf functions. (A leaf function is one that does not call any other functions.) The default is -mno-tpcs- frame. -mtpcs-leaf-frame Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all leaf functions. (A leaf function is one that does not call any other functions.) The default is -mno-apcs-leaf- frame. -mcallee-super-interworking Gives all externally visible functions in the file being compiled an ARM instruction set header which switches to Thumb mode before executing the rest of the function. This allows these functions to be called from non-interworking code. -mcaller-super-interworking Allows calls via function pointers (including virtual functions) to execute correctly regardless of whether the target code has been compiled for interworking or not. There is a small overhead in the cost of executing a function pointer if this option is enabled. MN10200 Options These -m options are defined for Matsushita MN10200 architectures: -mrelax Indicate to the linker that it should perform a relaxation opti- mization pass to shorten branches, calls and absolute memory addresses. This option only has an effect when used on the command line for the final link step. This option makes symbolic debugging impossible. MN10300 Options These -m options are defined for Matsushita MN10300 architectures: -mmult-bug Generate code to avoid bugs in the multiply instructions for the MN10300 processors. This is the default. -mno-mult-bug Do not generate code to avoid bugs in the multiply instructions for the MN10300 processors. -mam33 Generate code which uses features specific to the AM33 processor. -mno-am33 Do not generate code which uses features specific to the AM33 pro- cessor. This is the default. -mno-crt0 Do not link in the C run-time initialization object file. -mrelax Indicate to the linker that it should perform a relaxation opti- mization pass to shorten branches, calls and absolute memory addresses. This option only has an effect when used on the command line for the final link step. This option makes symbolic debugging impossible. M32R/D Options These -m options are defined for Mitsubishi M32R/D architectures: -m32rx Generate code for the M32R/X. -m32r Generate code for the M32R. This is the default. -mcode-model=small Assume all objects live in the lower 16MB of memory (so that their addresses can be loaded with the "ld24" instruction), and assume all subroutines are reachable with the "bl" instruction. This is the default. The addressability of a particular object can be set with the "model" attribute. -mcode-model=medium Assume objects may be anywhere in the 32-bit address space (the compiler will generate "seth/add3" instructions to load their addresses), and assume all subroutines are reachable with the "bl" instruction. -mcode-model=large Assume objects may be anywhere in the 32-bit address space (the compiler will generate "seth/add3" instructions to load their addresses), and assume subroutines may not be reachable with the "bl" instruction (the compiler will generate the much slower "seth/add3/jl" instruction sequence). -msdata=none Disable use of the small data area. Variables will be put into one of .data, bss, or .rodata (unless the "section" attribute has been specified). This is the default. The small data area consists of sections .sdata and .sbss. Objects may be explicitly put in the small data area with the "section" attribute using one of these sections. -msdata=sdata Put small global and static data in the small data area, but do not generate special code to reference them. -msdata=use Put small global and static data in the small data area, and gener- ate special instructions to reference them. -G num Put global and static objects less than or equal to num bytes into the small data or bss sections instead of the normal data or bss sections. The default value of num is 8. The -msdata option must be set to one of sdata or use for this option to have any effect. All modules should be compiled with the same -G num value. Compil- ing with different values of num may or may not work; if it doesn't the linker will give an error message---incorrect code will not be generated. M88K Options These -m options are defined for Motorola 88k architectures: -m88000 Generate code that works well on both the m88100 and the m88110. -m88100 Generate code that works best for the m88100, but that also runs on the m88110. -m88110 Generate code that works best for the m88110, and may not run on the m88100. -mbig-pic Obsolete option to be removed from the next revision. Use -fPIC. -midentify-revision Include an "ident" directive in the assembler output recording the source file name, compiler name and version, timestamp, and compi- lation flags used. -mno-underscores In assembler output, emit symbol names without adding an underscore character at the beginning of each name. The default is to use an underscore as prefix on each name. -mocs-debug-info -mno-ocs-debug-info Include (or omit) additional debugging information (about registers used in each stack frame) as specified in the 88open Object Compat- ibility Standard, ``OCS''. This extra information allows debugging of code that has had the frame pointer eliminated. The default for SVr4 and Delta 88 SVr3.2 is to include this information; other 88k configurations omit this information by default. -mocs-frame-position When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the canoni- cal frame address, which is the stack pointer (register 31) on entry to the function. The SVr4 and Delta88 SVr3.2, and BCS con- figurations use -mocs-frame-position; other 88k configurations have the default -mno-ocs-frame-position. -mno-ocs-frame-position When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the frame pointer register (register 30). When this option is in effect, the frame pointer is not eliminated when debugging information is selected by the -g switch. -moptimize-arg-area Save space by reorganizing the stack frame. This option generates code that does not agree with the 88open specifications, but uses less memory. -mno-optimize-arg-area Do not reorganize the stack frame to save space. This is the default. The generated conforms to the specification, but uses more memory. -mshort-data-num Generate smaller data references by making them relative to "r0", which allows loading a value using a single instruction (rather than the usual two). You control which data references are affected by specifying num with this option. For example, if you specify -mshort-data-512, then the data references affected are those involving displacements of less than 512 bytes. -mshort- data-num is not effective for num greater than 64k. -mserialize-volatile -mno-serialize-volatile Do, or don't, generate code to guarantee sequential consistency of volatile memory references. By default, consistency is guaranteed. The order of memory references made by the MC88110 processor does not always match the order of the instructions requesting those references. In particular, a load instruction may execute before a preceding store instruction. Such reordering violates sequential consistency of volatile memory references, when there are multiple processors. When consistency must be guaranteed, GCC generates special instructions, as needed, to force execution in the proper order. The MC88100 processor does not reorder memory references and so always provides sequential consistency. However, by default, GCC generates the special instructions to guarantee consistency even when you use -m88100, so that the code may be run on an MC88110 processor. If you intend to run your code only on the MC88100 pro- cessor, you may use -mno-serialize-volatile. The extra code generated to guarantee consistency may affect the performance of your application. If you know that you can safely forgo this guarantee, you may use -mno-serialize-volatile. -msvr4 -msvr3 Turn on (-msvr4) or off (-msvr3) compiler extensions related to System V release 4 (SVr4). This controls the following: 1. Which variant of the assembler syntax to emit. 2. -msvr4 makes the C preprocessor recognize #pragma weak that is used on System V release 4. 3. -msvr4 makes GCC issue additional declaration directives used in SVr4. -msvr4 is the default for the m88k-motorola-sysv4 configuration. -msvr3 is the default for all other m88k configurations. -mversion-03.00 This option is obsolete, and is ignored. -mno-check-zero-division -mcheck-zero-division Do, or don't, generate code to guarantee that integer division by zero will be detected. By default, detection is guaranteed. Some models of the MC88100 processor fail to trap upon integer division by zero under certain conditions. By default, when com- piling code that might be run on such a processor, GCC generates code that explicitly checks for zero-valued divisors and traps with exception number 503 when one is detected. Use of -mno-check-zero- division suppresses such checking for code generated to run on an MC88100 processor. GCC assumes that the MC88110 processor correctly detects all instances of integer division by zero. When -m88110 is specified, no explicit checks for zero-valued divisors are generated, and both -mcheck-zero-division and -mno-check-zero-division are ignored. -muse-div-instruction Use the div instruction for signed integer division on the MC88100 processor. By default, the div instruction is not used. On the MC88100 processor the signed integer division instruction div) traps to the operating system on a negative operand. The operating system transparently completes the operation, but at a large cost in execution time. By default, when compiling code that might be run on an MC88100 processor, GCC emulates signed integer division using the unsigned integer division instruction divu), thereby avoiding the large penalty of a trap to the operating sys- tem. Such emulation has its own, smaller, execution cost in both time and space. To the extent that your code's important signed integer division operations are performed on two nonnegative oper- ands, it may be desirable to use the div instruction directly. On the MC88110 processor the div instruction (also known as the divs instruction) processes negative operands without trapping to the operating system. When -m88110 is specified, -muse-div- instruction is ignored, and the div instruction is used for signed integer division. Note that the result of dividing "INT_MIN" by -1 is undefined. In particular, the behavior of such a division with and without -muse- div-instruction may differ. -mtrap-large-shift -mhandle-large-shift Include code to detect bit-shifts of more than 31 bits; respec- tively, trap such shifts or emit code to handle them properly. By default GCC makes no special provision for large bit shifts. -mwarn-passed-structs Warn when a function passes a struct as an argument or result. Structure-passing conventions have changed during the evolution of the C language, and are often the source of portability problems. By default, GCC issues no such warning. IBM RS/6000 and PowerPC Options These -m options are defined for the IBM RS/6000 and PowerPC: -mpower -mno-power -mpower2 -mno-power2 -mpowerpc -mno-powerpc -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mpowerpc64 -mno-powerpc64 GCC supports two related instruction set architectures for the RS/6000 and PowerPC. The POWER instruction set are those instruc- tions supported by the rios chip set used in the original RS/6000 systems and the PowerPC instruction set is the architecture of the Motorola MPC5xx, MPC6xx, MPC8xx microprocessors, and the IBM 4xx microprocessors. Neither architecture is a subset of the other. However there is a large common subset of instructions supported by both. An MQ reg- ister is included in processors supporting the POWER architecture. You use these options to specify which instructions are available on the processor you are using. The default value of these options is determined when configuring GCC. Specifying the -mcpu=cpu_type overrides the specification of these options. We recommend you use the -mcpu=cpu_type option rather than the options listed above. The -mpower option allows GCC to generate instructions that are found only in the POWER architecture and to use the MQ register. Specifying -mpower2 implies -power and also allows GCC to generate instructions that are present in the POWER2 architecture but not the original POWER architecture. The -mpowerpc option allows GCC to generate instructions that are found only in the 32-bit subset of the PowerPC architecture. Spec- ifying -mpowerpc-gpopt implies -mpowerpc and also allows GCC to use the optional PowerPC architecture instructions in the General Pur- pose group, including floating-point square root. Specifying -mpowerpc-gfxopt implies -mpowerpc and also allows GCC to use the optional PowerPC architecture instructions in the Graphics group, including floating-point select. The -mpowerpc64 option allows GCC to generate the additional 64-bit instructions that are found in the full PowerPC64 architecture and to treat GPRs as 64-bit, doubleword quantities. GCC defaults to -mno-powerpc64. If you specify both -mno-power and -mno-powerpc, GCC will use only the instructions in the common subset of both architectures plus some special AIX common-mode calls, and will not use the MQ regis- ter. Specifying both -mpower and -mpowerpc permits GCC to use any instruction from either architecture and to allow use of the MQ register; specify this for the Motorola MPC601. -mnew-mnemonics -mold-mnemonics Select which mnemonics to use in the generated assembler code. With -mnew-mnemonics, GCC uses the assembler mnemonics defined for the PowerPC architecture. With -mold-mnemonics it uses the assem- bler mnemonics defined for the POWER architecture. Instructions defined in only one architecture have only one mnemonic; GCC uses that mnemonic irrespective of which of these options is specified. GCC defaults to the mnemonics appropriate for the architecture in use. Specifying -mcpu=cpu_type sometimes overrides the value of these option. Unless you are building a cross-compiler, you should normally not specify either -mnew-mnemonics or -mold-mnemonics, but should instead accept the default. -mcpu=cpu_type Set architecture type, register usage, choice of mnemonics, and instruction scheduling parameters for machine type cpu_type. Sup- ported values for cpu_type are rios, rios1, rsc, rios2, rs64a, 601, 602, 603, 603e, 604, 604e, 620, 630, 740, 7400, 7450, 750, power, power2, powerpc, 403, 505, 801, 821, 823, and 860 and common. -mcpu=common selects a completely generic processor. Code gener- ated under this option will run on any POWER or PowerPC processor. GCC will use only the instructions in the common subset of both architectures, and will not use the MQ register. GCC assumes a generic processor model for scheduling purposes. -mcpu=power, -mcpu=power2, -mcpu=powerpc, and -mcpu=powerpc64 spec- ify generic POWER, POWER2, pure 32-bit PowerPC (i.e., not MPC601), and 64-bit PowerPC architecture machine types, with an appropriate, generic processor model assumed for scheduling purposes. The other options specify a specific processor. Code generated under those options will run best on that processor, and may not run at all on others. The -mcpu options automatically enable or disable other -m options as follows: common -mno-power, -mno-powerpc power power2 rios1 rios2 rsc -mpower, -mno-powerpc, -mno-new-mnemonics powerpc rs64a 602 603 603e 604 620 630 740 7400 7450 750 505 -mno-power, -mpowerpc, -mnew-mnemonics 601 -mpower, -mpowerpc, -mnew-mnemonics 403 821 860 -mno-power, -mpowerpc, -mnew-mnemonics, -msoft-float -mtune=cpu_type Set the instruction scheduling parameters for machine type cpu_type, but do not set the architecture type, register usage, or choice of mnemonics, as -mcpu=cpu_type would. The same values for cpu_type are used for -mtune as for -mcpu. If both are specified, the code generated will use the architecture, registers, and mnemonics set by -mcpu, but the scheduling parameters set by -mtune. -maltivec -mno-altivec These switches enable or disable the use of built-in functions that allow access to the AltiVec instruction set. You may also need to set -mabi=altivec to adjust the current ABI with AltiVec ABI enhancements. -mabi=spe Extend the current ABI with SPE ABI extensions. This does not change the default ABI, instead it adds the SPE ABI extensions to the current ABI. -mabi=no-spe Disable Booke SPE ABI extensions for the current ABI. -misel=yes/no -misel This switch enables or disables the generation of ISEL instruc- tions. -mfull-toc -mno-fp-in-toc -mno-sum-in-toc -mminimal-toc Modify generation of the TOC (Table Of Contents), which is created for every executable file. The -mfull-toc option is selected by default. In that case, GCC will allocate at least one TOC entry for each unique non-automatic variable reference in your program. GCC will also place floating-point constants in the TOC. However, only 16,384 entries are available in the TOC. If you receive a linker error message that saying you have over- flowed the available TOC space, you can reduce the amount of TOC space used with the -mno-fp-in-toc and -mno-sum-in-toc options. -mno-fp-in-toc prevents GCC from putting floating-point constants in the TOC and -mno-sum-in-toc forces GCC to generate code to cal- culate the sum of an address and a constant at run-time instead of putting that sum into the TOC. You may specify one or both of these options. Each causes GCC to produce very slightly slower and larger code at the expense of conserving TOC space. If you still run out of space in the TOC even when you specify both of these options, specify -mminimal-toc instead. This option causes GCC to make only one TOC entry for every file. When you specify this option, GCC will produce code that is slower and larger but which uses extremely little TOC space. You may wish to use this option only on files that contain less frequently executed code. -maix64 -maix32 Enable 64-bit AIX ABI and calling convention: 64-bit pointers, 64-bit "long" type, and the infrastructure needed to support them. Specifying -maix64 implies -mpowerpc64 and -mpowerpc, while -maix32 disables the 64-bit ABI and implies -mno-powerpc64. GCC defaults to -maix32. -mxl-call -mno-xl-call On AIX, pass floating-point arguments to prototyped functions beyond the register save area (RSA) on the stack in addition to argument FPRs. The AIX calling convention was extended but not initially documented to handle an obscure K&R C case of calling a function that takes the address of its arguments with fewer argu- ments than declared. AIX XL compilers access floating point argu- ments which do not fit in the RSA from the stack when a subroutine is compiled without optimization. Because always storing floating- point arguments on the stack is inefficient and rarely needed, this option is not enabled by default and only is necessary when calling subroutines compiled by AIX XL compilers without optimization. -mpe Support IBM RS/6000 SP Parallel Environment (PE). Link an applica- tion written to use message passing with special startup code to enable the application to run. The system must have PE installed in the standard location (/usr/lpp/ppe.poe/), or the specs file must be overridden with the -specs= option to specify the appropri- ate directory location. The Parallel Environment does not support threads, so the -mpe option and the -pthread option are incompati- ble. -msoft-float -mhard-float Generate code that does not use (uses) the floating-point register set. Software floating point emulation is provided if you use the -msoft-float option, and pass the option to GCC when linking. -mmultiple -mno-multiple Generate code that uses (does not use) the load multiple word instructions and the store multiple word instructions. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use -mmultiple on little endian PowerPC systems, since those instructions do not work when the processor is in little endian mode. The exceptions are PPC740 and PPC750 which permit the instructions usage in little endian mode. -mstring -mno-string Generate code that uses (does not use) the load string instructions and the store string word instructions to save multiple registers and do small block moves. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use -mstring on little endian PowerPC systems, since those instructions do not work when the processor is in little endian mode. The exceptions are PPC740 and PPC750 which permit the instructions usage in little endian mode. -mupdate -mno-update Generate code that uses (does not use) the load or store instruc- tions that update the base register to the address of the calcu- lated memory location. These instructions are generated by default. If you use -mno-update, there is a small window between the time that the stack pointer is updated and the address of the previous frame is stored, which means code that walks the stack frame across interrupts or signals may get corrupted data. -mfused-madd -mno-fused-madd Generate code that uses (does not use) the floating point multiply and accumulate instructions. These instructions are generated by default if hardware floating is used. -mno-bit-align -mbit-align On System V.4 and embedded PowerPC systems do not (do) force struc- tures and unions that contain bit-fields to be aligned to the base type of the bit-field. For example, by default a structure containing nothing but 8 "unsigned" bit-fields of length 1 would be aligned to a 4 byte boundary and have a size of 4 bytes. By using -mno-bit-align, the structure would be aligned to a 1 byte boundary and be one byte in size. -mno-strict-align -mstrict-align On System V.4 and embedded PowerPC systems do not (do) assume that unaligned memory references will be handled by the system. -mrelocatable -mno-relocatable On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a different address at run- time. If you use -mrelocatable on any module, all objects linked together must be compiled with -mrelocatable or -mrelocatable-lib. -mrelocatable-lib -mno-relocatable-lib On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a different address at run- time. Modules compiled with -mrelocatable-lib can be linked with either modules compiled without -mrelocatable and -mrelocatable-lib or with modules compiled with the -mrelocatable options. -mno-toc -mtoc On System V.4 and embedded PowerPC systems do not (do) assume that register 2 contains a pointer to a global area pointing to the addresses used in the program. -mlittle -mlittle-endian On System V.4 and embedded PowerPC systems compile code for the processor in little endian mode. The -mlittle-endian option is the same as -mlittle. -mbig -mbig-endian On System V.4 and embedded PowerPC systems compile code for the processor in big endian mode. The -mbig-endian option is the same as -mbig. -mcall-sysv On System V.4 and embedded PowerPC systems compile code using call- ing conventions that adheres to the March 1995 draft of the System V Application Binary Interface, PowerPC processor supplement. This is the default unless you configured GCC using powerpc-*-eabiaix. -mcall-sysv-eabi Specify both -mcall-sysv and -meabi options. -mcall-sysv-noeabi Specify both -mcall-sysv and -mno-eabi options. -mcall-aix On System V.4 and embedded PowerPC systems compile code using call- ing conventions that are similar to those used on AIX. This is the default if you configured GCC using powerpc-*-eabiaix. -mcall-solaris On System V.4 and embedded PowerPC systems compile code for the Solaris operating system. -mcall-linux On System V.4 and embedded PowerPC systems compile code for the Linux-based GNU system. -mcall-gnu On System V.4 and embedded PowerPC systems compile code for the Hurd-based GNU system. -mcall-netbsd On System V.4 and embedded PowerPC systems compile code for the NetBSD operating system. -maix-struct-return Return all structures in memory (as specified by the AIX ABI). -msvr4-struct-return Return structures smaller than 8 bytes in registers (as specified by the SVR4 ABI). -mabi=altivec Extend the current ABI with AltiVec ABI extensions. This does not change the default ABI, instead it adds the AltiVec ABI extensions to the current ABI. -mabi=no-altivec Disable AltiVec ABI extensions for the current ABI. -mprototype -mno-prototype On System V.4 and embedded PowerPC systems assume that all calls to variable argument functions are properly prototyped. Otherwise, the compiler must insert an instruction before every non prototyped call to set or clear bit 6 of the condition code register (CR) to indicate whether floating point values were passed in the floating point registers in case the function takes a variable arguments. With -mprototype, only calls to prototyped variable argument func- tions will set or clear the bit. -msim On embedded PowerPC systems, assume that the startup module is called sim-crt0.o and that the standard C libraries are libsim.a and libc.a. This is the default for powerpc-*-eabisim. configura- tions. -mmvme On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libmvme.a and libc.a. -mads On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libads.a and libc.a. -myellowknife On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libyk.a and libc.a. -mvxworks On System V.4 and embedded PowerPC systems, specify that you are compiling for a VxWorks system. -mwindiss Specify that you are compiling for the WindISS simulation environ- ment. -memb On embedded PowerPC systems, set the PPC_EMB bit in the ELF flags header to indicate that eabi extended relocations are used. -meabi -mno-eabi On System V.4 and embedded PowerPC systems do (do not) adhere to the Embedded Applications Binary Interface (eabi) which is a set of modifications to the System V.4 specifications. Selecting -meabi means that the stack is aligned to an 8 byte boundary, a function "__eabi" is called to from "main" to set up the eabi environment, and the -msdata option can use both "r2" and "r13" to point to two separate small data areas. Selecting -mno-eabi means that the stack is aligned to a 16 byte boundary, do not call an initializa- tion function from "main", and the -msdata option will only use "r13" to point to a single small data area. The -meabi option is on by default if you configured GCC using one of the pow- erpc*-*-eabi* options. -msdata=eabi On System V.4 and embedded PowerPC systems, put small initialized "const" global and static data in the .sdata2 section, which is pointed to by register "r2". Put small initialized non-"const" global and static data in the .sdata section, which is pointed to by register "r13". Put small uninitialized global and static data in the .sbss section, which is adjacent to the .sdata section. The -msdata=eabi option is incompatible with the -mrelocatable option. The -msdata=eabi option also sets the -memb option. -msdata=sysv On System V.4 and embedded PowerPC systems, put small global and static data in the .sdata section, which is pointed to by register "r13". Put small uninitialized global and static data in the .sbss section, which is adjacent to the .sdata section. The -msdata=sysv option is incompatible with the -mrelocatable option. -msdata=default -msdata On System V.4 and embedded PowerPC systems, if -meabi is used, com- pile code the same as -msdata=eabi, otherwise compile code the same as -msdata=sysv. -msdata-data On System V.4 and embedded PowerPC systems, put small global and static data in the .sdata section. Put small uninitialized global and static data in the .sbss section. Do not use register "r13" to address small data however. This is the default behavior unless other -msdata options are used. -msdata=none -mno-sdata On embedded PowerPC systems, put all initialized global and static data in the .data section, and all uninitialized data in the .bss section. -G num On embedded PowerPC systems, put global and static items less than or equal to num bytes into the small data or bss sections instead of the normal data or bss section. By default, num is 8. The -G num switch is also passed to the linker. All modules should be compiled with the same -G num value. -mregnames -mno-regnames On System V.4 and embedded PowerPC systems do (do not) emit regis- ter names in the assembly language output using symbolic forms. -mlongcall -mno-longcall Default to making all function calls via pointers, so that func- tions which reside further than 64 megabytes (67,108,864 bytes) from the current location can be called. This setting can be over- ridden by the "shortcall" function attribute, or by "#pragma long- call(0)". Some linkers are capable of detecting out-of-range calls and gener- ating glue code on the fly. On these systems, long calls are unnecessary and generate slower code. As of this writing, the AIX linker can do this, as can the GNU linker for PowerPC/64. It is planned to add this feature to the GNU linker for 32-bit PowerPC systems as well. In the future, we may cause GCC to ignore all longcall specifica- tions when the linker is known to generate glue. -pthread Adds support for multithreading with the pthreads library. This option sets flags for both the preprocessor and linker. Darwin Options These options are defined for all architectures running the Darwin operating system. They are useful for compatibility with other Mac OS compilers. -all_load Loads all members of static archive libraries. See man ld(1) for more information. -arch_errors_fatal Cause the errors having to do with files that have the wrong archi- tecture to be fatal. -bind_at_load Causes the output file to be marked such that the dynamic linker will bind all undefined references when the file is loaded or launched. -bundle Produce a Mach-o bundle format file. See man ld(1) for more infor- mation. -bundle_loader executable This specifies the executable that will be loading the build output file being linked. See man ld(1) for more information. -allowable_client client_name -arch_only -client_name -compatibility_version -current_version -dependency-file -dylib_file -dylinker_install_name -dynamic -dynamiclib -exported_symbols_list -filelist -flat_namespace -force_cpusubtype_ALL -force_flat_namespace -headerpad_max_install_names -image_base -init -install_name -keep_private_externs -multi_module -multiply_defined -multiply_defined_unused -noall_load -nomultidefs -noprebind -noseglinkedit -pagezero_size -prebind -prebind_all_twolevel_modules -private_bundle -read_only_relocs -sectalign -sectobjectsymbols -whyload -seg1addr -sectcreate -sectobjectsymbols -sectorder -seg_addr_table -seg_addr_table_filename -seglinkedit -segprot -segs_read_only_addr -segs_read_write_addr -single_module -static -sub_library -sub_umbrella -twolevel_namespace -umbrella -undefined -unexported_symbols_list -weak_reference_mismatches -whatsloaded This options are available for Darwin linker. Darwin linker man page describes them in detail. IBM RT Options These -m options are defined for the IBM RT PC: -min-line-mul Use an in-line code sequence for integer multiplies. This is the default. -mcall-lib-mul Call "lmul$$" for integer multiples. -mfull-fp-blocks Generate full-size floating point data blocks, including the mini- mum amount of scratch space recommended by IBM. This is the default. -mminimum-fp-blocks Do not include extra scratch space in floating point data blocks. This results in smaller code, but slower execution, since scratch space must be allocated dynamically. -mfp-arg-in-fpregs Use a calling sequence incompatible with the IBM calling convention in which floating point arguments are passed in floating point reg- isters. Note that "stdarg.h" will not work with floating point op- erands if this option is specified. -mfp-arg-in-gregs Use the normal calling convention for floating point arguments. This is the default. -mhc-struct-return Return structures of more than one word in memory, rather than in a register. This provides compatibility with the MetaWare HighC (hc) compiler. Use the option -fpcc-struct-return for compatibility with the Portable C Compiler (pcc). -mnohc-struct-return Return some structures of more than one word in registers, when convenient. This is the default. For compatibility with the IBM- supplied compilers, use the option -fpcc-struct-return or the option -mhc-struct-return. MIPS Options These -m options are defined for the MIPS family of computers: -march=arch Generate code that will run on arch, which can be the name of a generic MIPS ISA, or the name of a particular processor. The ISA names are: mips1, mips2, mips3, mips4, mips32 and mips64. The pro- cessor names are: r2000, r3000, r3900, r4000, vr4100, vr4300, r4400, r4600, r4650, vr5000, r6000, r8000, 4kc, 4kp, 5kc, 20kc, orion, and sb1. The special value from-abi selects the most com- patible architecture for the selected ABI (that is, mips1 for 32-bit ABIs and mips3 for 64-bit ABIs). In processor names, a final 000 can be abbreviated as k (for exam- ple, -march=r2k). Prefixes are optional, and vr may be written r. GCC defines two macros based on the value of this option. The first is _MIPS_ARCH, which gives the name of target architecture, as a string. The second has the form _MIPS_ARCH_foo, where foo is the capitalized value of _MIPS_ARCH. For example, -march=r2000 will set _MIPS_ARCH to "r2000" and define the macro _MIPS_ARCH_R2000. Note that the _MIPS_ARCH macro uses the processor names given above. In other words, it will have the full prefix and will not abbreviate 000 as k. In the case of from-abi, the macro names the resolved architecture (either "mips1" or "mips3"). It names the default architecture when no -march option is given. -mtune=arch Optimize for arch. Among other things, this option controls the way instructions are scheduled, and the perceived cost of arith- metic operations. The list of arch values is the same as for -march. When this option is not used, GCC will optimize for the processor specified by -march. By using -march and -mtune together, it is possible to generate code that will run on a family of processors, but optimize the code for one particular member of that family. -mtune defines the macros _MIPS_TUNE and _MIPS_TUNE_foo, which work in the same way as the -march ones described above. -mips1 Equivalent to -march=mips1. -mips2 Equivalent to -march=mips2. -mips3 Equivalent to -march=mips3. -mips4 Equivalent to -march=mips4. -mips32 Equivalent to -march=mips32. -mips64 Equivalent to -march=mips64. -mfused-madd -mno-fused-madd Generate code that uses (does not use) the floating point multiply and accumulate instructions, when they are available. These instructions are generated by default if they are available, but this may be undesirable if the extra precision causes problems or on certain chips in the mode where denormals are rounded to zero where denormals generated by multiply and accumulate instructions cause exceptions anyway. -mfp32 Assume that floating point registers are 32 bits wide. -mfp64 Assume that floating point registers are 64 bits wide. -mgp32 Assume that general purpose registers are 32 bits wide. -mgp64 Assume that general purpose registers are 64 bits wide. -mint64 Force int and long types to be 64 bits wide. See -mlong32 for an explanation of the default, and the width of pointers. -mlong64 Force long types to be 64 bits wide. See -mlong32 for an explana- tion of the default, and the width of pointers. -mlong32 Force long, int, and pointer types to be 32 bits wide. The default size of ints, longs and pointers depends on the ABI. All the supported ABIs use 32-bit ints. The n64 ABI uses 64-bit longs, as does the 64-bit Cygnus EABI; the others use 32-bit longs. Pointers are the same size as longs, or the same size as integer registers, whichever is smaller. -mabi=32 -mabi=o64 -mabi=n32 -mabi=64 -mabi=eabi -mabi=meabi Generate code for the given ABI. Note that there are two embedded ABIs: -mabi=eabi selects the one defined by Cygnus while -meabi=meabi selects the one defined by MIPS. Both these ABIs have 32-bit and 64-bit variants. Normally, GCC will generate 64-bit code when you select a 64-bit architec- ture, but you can use -mgp32 to get 32-bit code instead. -mmips-as Generate code for the MIPS assembler, and invoke mips-tfile to add normal debug information. This is the default for all platforms except for the OSF/1 reference platform, using the OSF/rose object format. If the either of the -gstabs or -gstabs+ switches are used, the mips-tfile program will encapsulate the stabs within MIPS ECOFF. -mgas Generate code for the GNU assembler. This is the default on the OSF/1 reference platform, using the OSF/rose object format. Also, this is the default if the configure option --with-gnu-as is used. -msplit-addresses -mno-split-addresses Generate code to load the high and low parts of address constants separately. This allows GCC to optimize away redundant loads of the high order bits of addresses. This optimization requires GNU as and GNU ld. This optimization is enabled by default for some embedded targets where GNU as and GNU ld are standard. -mrnames -mno-rnames The -mrnames switch says to output code using the MIPS software names for the registers, instead of the hardware names (ie, a0 instead of $4). The only known assembler that supports this option is the Algorithmics assembler. -mgpopt -mno-gpopt The -mgpopt switch says to write all of the data declarations before the instructions in the text section, this allows the MIPS assembler to generate one word memory references instead of using two words for short global or static data items. This is on by default if optimization is selected. -mstats -mno-stats For each non-inline function processed, the -mstats switch causes the compiler to emit one line to the standard error file to print statistics about the program (number of registers saved, stack size, etc.). -mmemcpy -mno-memcpy The -mmemcpy switch makes all block moves call the appropriate string function (memcpy or bcopy) instead of possibly generating inline code. -mmips-tfile -mno-mips-tfile The -mno-mips-tfile switch causes the compiler not postprocess the object file with the mips-tfile program, after the MIPS assembler has generated it to add debug support. If mips-tfile is not run, then no local variables will be available to the debugger. In addition, stage2 and stage3 objects will have the temporary file names passed to the assembler embedded in the object file, which means the objects will not compare the same. The -mno-mips-tfile switch should only be used when there are bugs in the mips-tfile program that prevents compilation. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross- compilation. -mhard-float Generate output containing floating point instructions. This is the default if you use the unmodified sources. -mabicalls -mno-abicalls Emit (or do not emit) the pseudo operations .abicalls, .cpload, and .cprestore that some System V.4 ports use for position independent code. -mlong-calls -mno-long-calls Do all calls with the JALR instruction, which requires loading up a function's address into a register before the call. You need to use this switch, if you call outside of the current 512 megabyte segment to functions that are not through pointers. -mhalf-pic -mno-half-pic Put pointers to extern references into the data section and load them up, rather than put the references in the text section. -membedded-pic -mno-embedded-pic Generate PIC code suitable for some embedded systems. All calls are made using PC relative address, and all data is addressed using the $gp register. No more than 65536 bytes of global data may be used. This requires GNU as and GNU ld which do most of the work. This currently only works on targets which use ECOFF; it does not work with ELF. -membedded-data -mno-embedded-data Allocate variables to the read-only data section first if possible, then next in the small data section if possible, otherwise in data. This gives slightly slower code than the default, but reduces the amount of RAM required when executing, and thus may be preferred for some embedded systems. -muninit-const-in-rodata -mno-uninit-const-in-rodata When used together with -membedded-data, it will always store uninitialized const variables in the read-only data section. -msingle-float -mdouble-float The -msingle-float switch tells gcc to assume that the floating point coprocessor only supports single precision operations, as on the r4650 chip. The -mdouble-float switch permits gcc to use dou- ble precision operations. This is the default. -mmad -mno-mad Permit use of the mad, madu and mul instructions, as on the r4650 chip. -m4650 Turns on -msingle-float, -mmad, and, at least for now, -mcpu=r4650. -mips16 -mno-mips16 Enable 16-bit instructions. -mentry Use the entry and exit pseudo ops. This option can only be used with -mips16. -EL Compile code for the processor in little endian mode. The requi- site libraries are assumed to exist. -EB Compile code for the processor in big endian mode. The requisite libraries are assumed to exist. -G num Put global and static items less than or equal to num bytes into the small data or bss sections instead of the normal data or bss section. This allows the assembler to emit one word memory refer- ence instructions based on the global pointer (gp or $28), instead of the normal two words used. By default, num is 8 when the MIPS assembler is used, and 0 when the GNU assembler is used. The -G num switch is also passed to the assembler and linker. All modules should be compiled with the same -G num value. -nocpp Tell the MIPS assembler to not run its preprocessor over user assembler files (with a .s suffix) when assembling them. -mfix7000 Pass an option to gas which will cause nops to be inserted if the read of the destination register of an mfhi or mflo instruction occurs in the following two instructions. -no-crt0 Do not include the default crt0. -mflush-func=func -mno-flush-func Specifies the function to call to flush the I and D caches, or to not call any such function. If called, the function must take the same arguments as the common "_flush_func()", that is, the address of the memory range for which the cache is being flushed, the size of the memory range, and the number 3 (to flush both caches). The default depends on the target gcc was configured for, but commonly is either _flush_func or __cpu_flush. -mbranch-likely -mno-branch-likely Enable or disable use of Branch Likely instructions, regardless of the default for the selected architecture. By default, Branch Likely instructions may be generated if they are supported by the selected architecture. An exception is for the MIPS32 and MIPS64 architectures and processors which implement those architectures; for those, Branch Likely instructions will not be generated by default because the MIPS32 and MIPS64 architectures specifically deprecate their use. Intel 386 and AMD x86-64 Options These -m options are defined for the i386 and x86-64 family of comput- ers: -mcpu=cpu-type Tune to cpu-type everything applicable about the generated code, except for the ABI and the set of available instructions. The choices for cpu-type are i386, i486, i586, i686, pentium, pentium- mmx, pentiumpro, pentium2, pentium3, pentium4, k6, k6-2, k6-3, athlon, athlon-tbird, athlon-4, athlon-xp, athlon-mp, winchip-c6, winchip2 and c3. While picking a specific cpu-type will schedule things appropri- ately for that particular chip, the compiler will not generate any code that does not run on the i386 without the -march=cpu-type option being used. i586 is equivalent to pentium and i686 is equivalent to pentiumpro. k6 and athlon are the AMD chips as opposed to the Intel ones. -march=cpu-type Generate instructions for the machine type cpu-type. The choices for cpu-type are the same as for -mcpu. Moreover, specifying -march=cpu-type implies -mcpu=cpu-type. -m386 -m486 -mpentium -mpentiumpro These options are synonyms for -mcpu=i386, -mcpu=i486, -mcpu=pen- tium, and -mcpu=pentiumpro respectively. These synonyms are depre- cated. -mfpmath=unit Generate floating point arithmetics for selected unit unit. The choices for unit are: 387 Use the standard 387 floating point coprocessor present major- ity of chips and emulated otherwise. Code compiled with this option will run almost everywhere. The temporary results are computed in 80bit precision instead of precision specified by the type resulting in slightly different results compared to most of other chips. See -ffloat-store for more detailed description. This is the default choice for i386 compiler. sse Use scalar floating point instructions present in the SSE instruction set. This instruction set is supported by Pentium3 and newer chips, in the AMD line by Athlon-4, Athlon-xp and Athlon-mp chips. The earlier version of SSE instruction set supports only single precision arithmetics, thus the double and extended precision arithmetics is still done using 387. Later version, present only in Pentium4 and the future AMD x86-64 chips supports double precision arithmetics too. For i387 you need to use -march=cpu-type, -msse or -msse2 switches to enable SSE extensions and make this option effec- tive. For x86-64 compiler, these extensions are enabled by default. The resulting code should be considerably faster in the major- ity of cases and avoid the numerical instability problems of 387 code, but may break some existing code that expects tempo- raries to be 80bit. This is the default choice for the x86-64 compiler. sse,387 Attempt to utilize both instruction sets at once. This effec- tively double the amount of available registers and on chips with separate execution units for 387 and SSE the execution resources too. Use this option with care, as it is still experimental, because the gcc register allocator does not model separate functional units well. -masm=dialect Output asm instructions using selected dialect. Supported choices are intel or att (the default one). -mieee-fp -mno-ieee-fp Control whether or not the compiler uses IEEE floating point com- parisons. These handle correctly the case where the result of a comparison is unordered. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross- compilation. On machines where a function returns floating point results in the 80387 register stack, some floating point opcodes may be emitted even if -msoft-float is used. -mno-fp-ret-in-387 Do not use the FPU registers for return values of functions. The usual calling convention has functions return values of types "float" and "double" in an FPU register, even if there is no FPU. The idea is that the operating system should emulate an FPU. The option -mno-fp-ret-in-387 causes such values to be returned in ordinary CPU registers instead. -mno-fancy-math-387 Some 387 emulators do not support the "sin", "cos" and "sqrt" instructions for the 387. Specify this option to avoid generating those instructions. This option is the default on FreeBSD, OpenBSD and NetBSD. This option is overridden when -march indicates that the target cpu will always have an FPU and so the instruction will not need emulation. As of revision 2.6.1, these instructions are not generated unless you also use the -funsafe-math-optimizations switch. -malign-double -mno-align-double Control whether GCC aligns "double", "long double", and "long long" variables on a two word boundary or a one word boundary. Aligning "double" variables on a two word boundary will produce code that runs somewhat faster on a Pentium at the expense of more memory. Warning: if you use the -malign-double switch, structures contain- ing the above types will be aligned differently than the published application binary interface specifications for the 386 and will not be binary compatible with structures in code compiled without that switch. -m96bit-long-double -m128bit-long-double These switches control the size of "long double" type. The i386 application binary interface specifies the size to be 96 bits, so -m96bit-long-double is the default in 32 bit mode. Modern architectures (Pentium and newer) would prefer "long double" to be aligned to an 8 or 16 byte boundary. In arrays or structures conforming to the ABI, this would not be possible. So specifying a -m128bit-long-double will align "long double" to a 16 byte boundary by padding the "long double" with an additional 32 bit zero. In the x86-64 compiler, -m128bit-long-double is the default choice as its ABI specifies that "long double" is to be aligned on 16 byte boundary. Notice that neither of these options enable any extra precision over the x87 standard of 80 bits for a "long double". Warning: if you override the default value for your target ABI, the structures and arrays containing "long double" variables will change their size as well as function calling convention for func- tion taking "long double" will be modified. Hence they will not be binary compatible with arrays or structures in code compiled with- out that switch. -msvr3-shlib -mno-svr3-shlib Control whether GCC places uninitialized local variables into the "bss" or "data" segments. -msvr3-shlib places them into "bss". These options are meaningful only on System V Release 3. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "ret" num instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. You can specify that an individual function is called with this calling sequence with the function attribute stdcall. You can also override the -mrtd option by using the function attribute cdecl. Warning: this calling convention is incompatible with the one nor- mally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) -mregparm=num Control how many registers are used to pass integer arguments. By default, no registers are used to pass arguments, and at most 3 registers can be used. You can control this behavior for a spe- cific function by using the function attribute regparm. Warning: if you use this switch, and num is nonzero, then you must build all modules with the same value, including any libraries. This includes the system libraries and startup modules. -mpreferred-stack-boundary=num Attempt to keep the stack boundary aligned to a 2 raised to num byte boundary. If -mpreferred-stack-boundary is not specified, the default is 4 (16 bytes or 128 bits), except when optimizing for code size (-Os), in which case the default is the minimum correct alignment (4 bytes for x86, and 8 bytes for x86-64). On Pentium and PentiumPro, "double" and "long double" values should be aligned to an 8 byte boundary (see -malign-double) or suffer significant run time performance penalties. On Pentium III, the Streaming SIMD Extension (SSE) data type "__m128" suffers similar penalties if it is not 16 byte aligned. To ensure proper alignment of this values on the stack, the stack boundary must be as aligned as that required by any value stored on the stack. Further, every function must be generated such that it keeps the stack aligned. Thus calling a function compiled with a higher preferred stack boundary from a function compiled with a lower preferred stack boundary will most likely misalign the stack. It is recommended that libraries that use callbacks always use the default setting. This extra alignment does consume extra stack space, and generally increases code size. Code that is sensitive to stack space usage, such as embedded systems and operating system kernels, may want to reduce the preferred alignment to -mpreferred-stack-boundary=2. -mmmx -mno-mmx -msse -mno-sse -msse2 -mno-sse2 -msse3 -mno-sse3 -m3dnow -mno-3dnow These switches enable or disable the use of built-in functions that allow direct access to the MMX, SSE, SSE2, SSE3 and 3Dnow exten- sions of the instruction set. To have SSE/SSE2 instructions generated automatically from float- ing-point code, see -mfpmath=sse. -mpush-args -mno-push-args Use PUSH operations to store outgoing parameters. This method is shorter and usually equally fast as method using SUB/MOV operations and is enabled by default. In some cases disabling it may improve performance because of improved scheduling and reduced dependen- cies. -maccumulate-outgoing-args If enabled, the maximum amount of space required for outgoing argu- ments will be computed in the function prologue. This is faster on most modern CPUs because of reduced dependencies, improved schedul- ing and reduced stack usage when preferred stack boundary is not equal to 2. The drawback is a notable increase in code size. This switch implies -mno-push-args. -mthreads Support thread-safe exception handling on Mingw32. Code that relies on thread-safe exception handling must compile and link all code with the -mthreads option. When compiling, -mthreads defines -D_MT; when linking, it links in a special thread helper library -lmingwthrd which cleans up per thread exception handling data. -mno-align-stringops Do not align destination of inlined string operations. This switch reduces code size and improves performance in case the destination is already aligned, but gcc don't know about it. -minline-all-stringops By default GCC inlines string operations only when destination is known to be aligned at least to 4 byte boundary. This enables more inlining, increase code size, but may improve performance of code that depends on fast memcpy, strlen and memset for short lengths. -momit-leaf-frame-pointer Don't keep the frame pointer in a register for leaf functions. This avoids the instructions to save, set up and restore frame pointers and makes an extra register available in leaf functions. The option -fomit-frame-pointer removes the frame pointer for all functions which might make debugging harder. These -m switches are supported in addition to the above on AMD x86-64 processors in 64-bit environments. -m32 -m64 Generate code for a 32-bit or 64-bit environment. The 32-bit envi- ronment sets int, long and pointer to 32 bits and generates code that runs on any i386 system. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits and generates code for AMD's x86-64 architecture. -mno-red-zone Do not use a so called red zone for x86-64 code. The red zone is mandated by the x86-64 ABI, it is a 128-byte area beyond the loca- tion of the stack pointer that will not be modified by signal or interrupt handlers and therefore can be used for temporary data without adjusting the stack pointer. The flag -mno-red-zone dis- ables this red zone. -mcmodel=small Generate code for the small code model: the program and its symbols must be linked in the lower 2 GB of the address space. Pointers are 64 bits. Programs can be statically or dynamically linked. This is the default code model. -mcmodel=kernel Generate code for the kernel code model. The kernel runs in the negative 2 GB of the address space. This model has to be used for Linux kernel code. -mcmodel=medium Generate code for the medium model: The program is linked in the lower 2 GB of the address space but symbols can be located anywhere in the address space. Programs can be statically or dynamically linked, but building of shared libraries are not supported with the medium model. -mcmodel=large Generate code for the large model: This model makes no assumptions about addresses and sizes of sections. Currently GCC does not implement this model. HPPA Options These -m options are defined for the HPPA family of computers: -march=architecture-type Generate code for the specified architecture. The choices for architecture-type are 1.0 for PA 1.0, 1.1 for PA 1.1, and 2.0 for PA 2.0 processors. Refer to /usr/lib/sched.models on an HP-UX sys- tem to determine the proper architecture option for your machine. Code compiled for lower numbered architectures will run on higher numbered architectures, but not the other way around. PA 2.0 support currently requires gas snapshot 19990413 or later. The next release of binutils (current is 2.9.1) will probably con- tain PA 2.0 support. -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 Synonyms for -march=1.0, -march=1.1, and -march=2.0 respectively. -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. -mjump-in-delay Fill delay slots of function calls with unconditional jump instruc- tions by modifying the return pointer for the function call to be the target of the conditional jump. -mdisable-fpregs Prevent floating point registers from being used in any manner. This is necessary for compiling kernels which perform lazy context switching of floating point registers. If you use this option and attempt to perform floating point operations, the compiler will abort. -mdisable-indexing Prevent the compiler from using indexing address modes. This avoids some rather obscure problems when compiling MIG generated code under MACH. -mno-space-regs Generate code that assumes the target has no space registers. This allows GCC to generate faster indirect calls and use unscaled index address modes. Such code is suitable for level 0 PA systems and kernels. -mfast-indirect-calls Generate code that assumes calls never cross space boundaries. This allows GCC to emit code which performs faster indirect calls. This option will not work in the presence of shared libraries or nested functions. -mlong-load-store Generate 3-instruction load and store sequences as sometimes required by the HP-UX 10 linker. This is equivalent to the +k option to the HP compilers. -mportable-runtime Use the portable calling conventions proposed by HP for ELF sys- tems. -mgas Enable the use of assembler directives only GAS understands. -mschedule=cpu-type Schedule code according to the constraints for the machine type cpu-type. The choices for cpu-type are 700 7100, 7100LC, 7200, 7300 and 8000. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper scheduling option for your machine. The default scheduling is 8000. -mlinker-opt Enable the optimization pass in the HP-UX linker. Note this makes symbolic debugging impossible. It also triggers a bug in the HP-UX 8 and HP-UX 9 linkers in which they give bogus error messages when linking some programs. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries are not available for all HPPA tar- gets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded target hppa1.1-*-pro does provide software floating point support. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. -msio Generate the predefine, "_SIO", for server IO. The default is -mwsio. This generates the predefines, "__hp9000s700", "__hp9000s700__" and "_WSIO", for workstation IO. These options are available under HP-UX and HI-UX. -mgnu-ld Use GNU ld specific options. This passes -shared to ld when build- ing a shared library. It is the default when GCC is configured, explicitly or implicitly, with the GNU linker. This option does not have any affect on which ld is called, it only changes what parameters are passed to that ld. The ld that is called is deter- mined by the --with-ld configure option, gcc's program search path, and finally by the user's PATH. The linker used by GCC can be printed using which `gcc -print-prog-name=ld`. -mhp-ld Use HP ld specific options. This passes -b to ld when building a shared library and passes +Accept TypeMismatch to ld on all links. It is the default when GCC is configured, explicitly or implicitly, with the HP linker. This option does not have any affect on which ld is called, it only changes what parameters are passed to that ld. The ld that is called is determined by the --with-ld configure option, gcc's program search path, and finally by the user's PATH. The linker used by GCC can be printed using which `gcc -print-prog- name=ld`. -mlong-calls Generate code that uses long call sequences. This ensures that a call is always able to reach linker generated stubs. The default is to generate long calls only when the distance from the call site to the beginning of the function or translation unit, as the case may be, exceeds a predefined limit set by the branch type being used. The limits for normal calls are 7,600,000 and 240,000 bytes, respectively for the PA 2.0 and PA 1.X architectures. Sibcalls are always limited at 240,000 bytes. Distances are measured from the beginning of functions when using the -ffunction-sections option, or when using the -mgas and -mno- portable-runtime options together under HP-UX with the SOM linker. It is normally not desirable to use this option as it will degrade performance. However, it may be useful in large applications, par- ticularly when partial linking is used to build the application. The types of long calls used depends on the capabilities of the assembler and linker, and the type of code being generated. The impact on systems that support long absolute calls, and long pic symbol-difference or pc-relative calls should be relatively small. However, an indirect call is used on 32-bit ELF systems in pic code and it is quite long. -nolibdld Suppress the generation of link options to search libdld.sl when the -static option is specified on HP-UX 10 and later. -static The HP-UX implementation of setlocale in libc has a dependency on libdld.sl. There isn't an archive version of libdld.sl. Thus, when the -static option is specified, special link options are needed to resolve this dependency. On HP-UX 10 and later, the GCC driver adds the necessary options to link with libdld.sl when the -static option is specified. This causes the resulting binary to be dynamic. On the 64-bit port, the linkers generate dynamic binaries by default in any case. The -nolibdld option can be used to prevent the GCC driver from adding these link options. -threads Add support for multithreading with the dce thread library under HP-UX. This option sets flags for both the preprocessor and linker. Intel 960 Options These -m options are defined for the Intel 960 implementations: -mcpu-type Assume the defaults for the machine type cpu-type for some of the other options, including instruction scheduling, floating point support, and addressing modes. The choices for cpu-type are ka, kb, mc, ca, cf, sa, and sb. The default is kb. -mnumerics -msoft-float The -mnumerics option indicates that the processor does support floating-point instructions. The -msoft-float option indicates that floating-point support should not be assumed. -mleaf-procedures -mno-leaf-procedures Do (or do not) attempt to alter leaf procedures to be callable with the "bal" instruction as well as "call". This will result in more efficient code for explicit calls when the "bal" instruction can be substituted by the assembler or linker, but less efficient code in other cases, such as calls via function pointers, or using a linker that doesn't support this optimization. -mtail-call -mno-tail-call Do (or do not) make additional attempts (beyond those of the machine-independent portions of the compiler) to optimize tail- recursive calls into branches. You may not want to do this because the detection of cases where this is not valid is not totally com- plete. The default is -mno-tail-call. -mcomplex-addr -mno-complex-addr Assume (or do not assume) that the use of a complex addressing mode is a win on this implementation of the i960. Complex addressing modes may not be worthwhile on the K-series, but they definitely are on the C-series. The default is currently -mcomplex-addr for all processors except the CB and CC. -mcode-align -mno-code-align Align code to 8-byte boundaries for faster fetching (or don't bother). Currently turned on by default for C-series implementa- tions only. -mic-compat -mic2.0-compat -mic3.0-compat Enable compatibility with iC960 v2.0 or v3.0. -masm-compat -mintel-asm Enable compatibility with the iC960 assembler. -mstrict-align -mno-strict-align Do not permit (do permit) unaligned accesses. -mold-align Enable structure-alignment compatibility with Intel's gcc release version 1.3 (based on gcc 1.37). This option implies -mstrict- align. -mlong-double-64 Implement type long double as 64-bit floating point numbers. With- out the option long double is implemented by 80-bit floating point numbers. The only reason we have it because there is no 128-bit long double support in fp-bit.c yet. So it is only useful for peo- ple using soft-float targets. Otherwise, we should recommend against use of it. DEC Alpha Options These -m options are defined for the DEC Alpha implementations: -mno-soft-float -msoft-float Use (do not use) the hardware floating-point instructions for floating-point operations. When -msoft-float is specified, func- tions in libgcc.a will be used to perform floating-point opera- tions. Unless they are replaced by routines that emulate the floating-point operations, or compiled in such a way as to call such emulations routines, these routines will issue floating-point operations. If you are compiling for an Alpha without floating- point operations, you must ensure that the library is built so as not to call them. Note that Alpha implementations without floating-point operations are required to have floating-point registers. -mfp-reg -mno-fp-regs Generate code that uses (does not use) the floating-point register set. -mno-fp-regs implies -msoft-float. If the floating-point register set is not used, floating point operands are passed in integer registers as if they were integers and floating-point results are passed in "$0" instead of "$f0". This is a non-stan- dard calling sequence, so any function with a floating-point argu- ment or return value called by code compiled with -mno-fp-regs must also be compiled with that option. A typical use of this option is building a kernel that does not use, and hence need not save and restore, any floating-point regis- ters. -mieee The Alpha architecture implements floating-point hardware optimized for maximum performance. It is mostly compliant with the IEEE floating point standard. However, for full compliance, software assistance is required. This option generates code fully IEEE com- pliant code except that the inexact-flag is not maintained (see below). If this option is turned on, the preprocessor macro "_IEEE_FP" is defined during compilation. The resulting code is less efficient but is able to correctly support denormalized num- bers and exceptional IEEE values such as not-a-number and plus/minus infinity. Other Alpha compilers call this option -ieee_with_no_inexact. -mieee-with-inexact This is like -mieee except the generated code also maintains the IEEE inexact-flag. Turning on this option causes the generated code to implement fully-compliant IEEE math. In addition to "_IEEE_FP", "_IEEE_FP_EXACT" is defined as a preprocessor macro. On some Alpha implementations the resulting code may execute sig- nificantly slower than the code generated by default. Since there is very little code that depends on the inexact-flag, you should normally not specify this option. Other Alpha compilers call this option -ieee_with_inexact. -mfp-trap-mode=trap-mode This option controls what floating-point related traps are enabled. Other Alpha compilers call this option -fptm trap-mode. The trap mode can be set to one of four values: n This is the default (normal) setting. The only traps that are enabled are the ones that cannot be disabled in software (e.g., division by zero trap). u In addition to the traps enabled by n, underflow traps are enabled as well. su Like su, but the instructions are marked to be safe for soft- ware completion (see Alpha architecture manual for details). sui Like su, but inexact traps are enabled as well. -mfp-rounding-mode=rounding-mode Selects the IEEE rounding mode. Other Alpha compilers call this option -fprm rounding-mode. The rounding-mode can be one of: n Normal IEEE rounding mode. Floating point numbers are rounded towards the nearest machine number or towards the even machine number in case of a tie. m Round towards minus infinity. c Chopped rounding mode. Floating point numbers are rounded towards zero. d Dynamic rounding mode. A field in the floating point control register (fpcr, see Alpha architecture reference manual) con- trols the rounding mode in effect. The C library initializes this register for rounding towards plus infinity. Thus, unless your program modifies the fpcr, d corresponds to round towards plus infinity. -mtrap-precision=trap-precision In the Alpha architecture, floating point traps are imprecise. This means without software assistance it is impossible to recover from a floating trap and program execution normally needs to be terminated. GCC can generate code that can assist operating system trap handlers in determining the exact location that caused a floating point trap. Depending on the requirements of an applica- tion, different levels of precisions can be selected: p Program precision. This option is the default and means a trap handler can only identify which program caused a floating point exception. f Function precision. The trap handler can determine the func- tion that caused a floating point exception. i Instruction precision. The trap handler can determine the exact instruction that caused a floating point exception. Other Alpha compilers provide the equivalent options called -scope_safe and -resumption_safe. -mieee-conformant This option marks the generated code as IEEE conformant. You must not use this option unless you also specify -mtrap-precision=i and either -mfp-trap-mode=su or -mfp-trap-mode=sui. Its only effect is to emit the line .eflag 48 in the function prologue of the gener- ated assembly file. Under DEC Unix, this has the effect that IEEE- conformant math library routines will be linked in. -mbuild-constants Normally GCC examines a 32- or 64-bit integer constant to see if it can construct it from smaller constants in two or three instruc- tions. If it cannot, it will output the constant as a literal and generate code to load it from the data segment at runtime. Use this option to require GCC to construct all integer constants using code, even if it takes more instructions (the maximum is six). You would typically use this option to build a shared library dynamic loader. Itself a shared library, it must relocate itself in memory before it can find the variables and constants in its own data segment. -malpha-as -mgas Select whether to generate code to be assembled by the vendor-sup- plied assembler (-malpha-as) or by the GNU assembler -mgas. -mbwx -mno-bwx -mcix -mno-cix -mfix -mno-fix -mmax -mno-max Indicate whether GCC should generate code to use the optional BWX, CIX, FIX and MAX instruction sets. The default is to use the instruction sets supported by the CPU type specified via -mcpu= option or that of the CPU on which GCC was built if none was speci- fied. -mfloat-vax -mfloat-ieee Generate code that uses (does not use) VAX F and G floating point arithmetic instead of IEEE single and double precision. -mexplicit-relocs -mno-explicit-relocs Older Alpha assemblers provided no way to generate symbol reloca- tions except via assembler macros. Use of these macros does not allow optimal instruction scheduling. GNU binutils as of version 2.12 supports a new syntax that allows the compiler to explicitly mark which relocations should apply to which instructions. This option is mostly useful for debugging, as GCC detects the capabili- ties of the assembler when it is built and sets the default accord- ingly. -msmall-data -mlarge-data When -mexplicit-relocs is in effect, static data is accessed via gp-relative relocations. When -msmall-data is used, objects 8 bytes long or smaller are placed in a small data area (the ".sdata" and ".sbss" sections) and are accessed via 16-bit relocations off of the "$gp" register. This limits the size of the small data area to 64KB, but allows the variables to be directly accessed via a single instruction. The default is -mlarge-data. With this option the data area is limited to just below 2GB. Programs that require more than 2GB of data must use "malloc" or "mmap" to allocate the data in the heap instead of in the program's data segment. When generating code for shared libraries, -fpic implies -msmall- data and -fPIC implies -mlarge-data. -mcpu=cpu_type Set the instruction set and instruction scheduling parameters for machine type cpu_type. You can specify either the EV style name or the corresponding chip number. GCC supports scheduling parameters for the EV4, EV5 and EV6 family of processors and will choose the default values for the instruction set from the processor you spec- ify. If you do not specify a processor type, GCC will default to the processor on which the compiler was built. Supported values for cpu_type are ev4 ev45 21064 Schedules as an EV4 and has no instruction set extensions. ev5 21164 Schedules as an EV5 and has no instruction set extensions. ev56 21164a Schedules as an EV5 and supports the BWX extension. pca56 21164pc 21164PC Schedules as an EV5 and supports the BWX and MAX extensions. ev6 21264 Schedules as an EV6 and supports the BWX, FIX, and MAX exten- sions. ev67 21264a Schedules as an EV6 and supports the BWX, CIX, FIX, and MAX extensions. -mtune=cpu_type Set only the instruction scheduling parameters for machine type cpu_type. The instruction set is not changed. -mmemory-latency=time Sets the latency the scheduler should assume for typical memory references as seen by the application. This number is highly dependent on the memory access patterns used by the application and the size of the external cache on the machine. Valid options for time are number A decimal number representing clock cycles. L1 L2 L3 main The compiler contains estimates of the number of clock cycles for ``typical'' EV4 & EV5 hardware for the Level 1, 2 & 3 caches (also called Dcache, Scache, and Bcache), as well as to main memory. Note that L3 is only valid for EV5. DEC Alpha/VMS Options These -m options are defined for the DEC Alpha/VMS implementations: -mvms-return-codes Return VMS condition codes from main. The default is to return POSIX style condition (e.g. error) codes. H8/300 Options These -m options are defined for the H8/300 implementations: -mrelax Shorten some address references at link time, when possible; uses the linker option -relax. -mh Generate code for the H8/300H. -ms Generate code for the H8S. -mn Generate code for the H8S and H8/300H in the normal mode. This switch must be used either with -mh or -ms. -ms2600 Generate code for the H8S/2600. This switch must be used with -ms. -mint32 Make "int" data 32 bits by default. -malign-300 On the H8/300H and H8S, use the same alignment rules as for the H8/300. The default for the H8/300H and H8S is to align longs and floats on 4 byte boundaries. -malign-300 causes them to be aligned on 2 byte boundaries. This option has no effect on the H8/300. SH Options These -m options are defined for the SH implementations: -m1 Generate code for the SH1. -m2 Generate code for the SH2. -m3 Generate code for the SH3. -m3e Generate code for the SH3e. -m4-nofpu Generate code for the SH4 without a floating-point unit. -m4-single-only Generate code for the SH4 with a floating-point unit that only sup- ports single-precision arithmetic. -m4-single Generate code for the SH4 assuming the floating-point unit is in single-precision mode by default. -m4 Generate code for the SH4. -mb Compile code for the processor in big endian mode. -ml Compile code for the processor in little endian mode. -mdalign Align doubles at 64-bit boundaries. Note that this changes the calling conventions, and thus some functions from the standard C library will not work unless you recompile it first with -mdalign. -mrelax Shorten some address references at link time, when possible; uses the linker option -relax. -mbigtable Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets. -mfmovd Enable the use of the instruction "fmovd". -mhitachi Comply with the calling conventions defined by Renesas. -mnomacsave Mark the "MAC" register as call-clobbered, even if -mhitachi is given. -mieee Increase IEEE-compliance of floating-point code. -misize Dump instruction size and location in the assembly code. -mpadstruct This option is deprecated. It pads structures to multiple of 4 bytes, which is incompatible with the SH ABI. -mspace Optimize for space instead of speed. Implied by -Os. -mprefergot When generating position-independent code, emit function calls using the Global Offset Table instead of the Procedure Linkage Ta- ble. -musermode Generate a library function call to invalidate instruction cache entries, after fixing up a trampoline. This library function call doesn't assume it can write to the whole memory address space. This is the default when the target is "sh-*-linux*". Options for System V These additional options are available on System V Release 4 for com- patibility with other compilers on those systems: -G Create a shared object. It is recommended that -symbolic or -shared be used instead. -Qy Identify the versions of each tool used by the compiler, in a ".ident" assembler directive in the output. -Qn Refrain from adding ".ident" directives to the output file (this is the default). -YP,dirs Search the directories dirs, and no others, for libraries specified with -l. -Ym,dir Look in the directory dir to find the M4 preprocessor. The assem- bler uses this option. TMS320C3x/C4x Options These -m options are defined for TMS320C3x/C4x implementations: -mcpu=cpu_type Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type are c30, c31, c32, c40, and c44. The default is c40 to generate code for the TMS320C40. -mbig-memory -mbig -msmall-memory -msmall Generates code for the big or small memory model. The small memory model assumed that all data fits into one 64K word page. At run- time the data page (DP) register must be set to point to the 64K page containing the .bss and .data program sections. The big mem- ory model is the default and requires reloading of the DP register for every direct memory access. -mbk -mno-bk Allow (disallow) allocation of general integer operands into the block count register BK. -mdb -mno-db Enable (disable) generation of code using decrement and branch, DBcond(D), instructions. This is enabled by default for the C4x. To be on the safe side, this is disabled for the C3x, since the maximum iteration count on the C3x is 2^{23 + 1} (but who iterates loops more than 2^{23} times on the C3x?). Note that GCC will try to reverse a loop so that it can utilize the decrement and branch instruction, but will give up if there is more than one memory ref- erence in the loop. Thus a loop where the loop counter is decre- mented can generate slightly more efficient code, in cases where the RPTB instruction cannot be utilized. -mdp-isr-reload -mparanoid Force the DP register to be saved on entry to an interrupt service routine (ISR), reloaded to point to the data section, and restored on exit from the ISR. This should not be required unless someone has violated the small memory model by modifying the DP register, say within an object library. -mmpyi -mno-mpyi For the C3x use the 24-bit MPYI instruction for integer multiplies instead of a library call to guarantee 32-bit results. Note that if one of the operands is a constant, then the multiplication will be performed using shifts and adds. If the -mmpyi option is not specified for the C3x, then squaring operations are performed inline instead of a library call. -mfast-fix -mno-fast-fix The C3x/C4x FIX instruction to convert a floating point value to an integer value chooses the nearest integer less than or equal to the floating point value rather than to the nearest integer. Thus if the floating point number is negative, the result will be incor- rectly truncated an additional code is necessary to detect and cor- rect this case. This option can be used to disable generation of the additional code required to correct the result. -mrptb -mno-rptb Enable (disable) generation of repeat block sequences using the RPTB instruction for zero overhead looping. The RPTB construct is only used for innermost loops that do not call functions or jump across the loop boundaries. There is no advantage having nested RPTB loops due to the overhead required to save and restore the RC, RS, and RE registers. This is enabled by default with -O2. -mrpts=count -mno-rpts Enable (disable) the use of the single instruction repeat instruc- tion RPTS. If a repeat block contains a single instruction, and the loop count can be guaranteed to be less than the value count, GCC will emit a RPTS instruction instead of a RPTB. If no value is specified, then a RPTS will be emitted even if the loop count can- not be determined at compile time. Note that the repeated instruc- tion following RPTS does not have to be reloaded from memory each iteration, thus freeing up the CPU buses for operands. However, since interrupts are blocked by this instruction, it is disabled by default. -mloop-unsigned -mno-loop-unsigned The maximum iteration count when using RPTS and RPTB (and DB on the C40) is 2^{31 + 1} since these instructions test if the iteration count is negative to terminate the loop. If the iteration count is unsigned there is a possibility than the 2^{31 + 1} maximum itera- tion count may be exceeded. This switch allows an unsigned itera- tion count. -mti Try to emit an assembler syntax that the TI assembler (asm30) is happy with. This also enforces compatibility with the API employed by the TI C3x C compiler. For example, long doubles are passed as structures rather than in floating point registers. -mregparm -mmemparm Generate code that uses registers (stack) for passing arguments to functions. By default, arguments are passed in registers where possible rather than by pushing arguments on to the stack. -mparallel-insns -mno-parallel-insns Allow the generation of parallel instructions. This is enabled by default with -O2. -mparallel-mpy -mno-parallel-mpy Allow the generation of MPY||ADD and MPY||SUB parallel instruc- tions, provided -mparallel-insns is also specified. These instruc- tions have tight register constraints which can pessimize the code generation of large functions. V850 Options These -m options are defined for V850 implementations: -mlong-calls -mno-long-calls Treat all calls as being far away (near). If calls are assumed to be far away, the compiler will always load the functions address up into a register, and call indirect through the pointer. -mno-ep -mep Do not optimize (do optimize) basic blocks that use the same index pointer 4 or more times to copy pointer into the "ep" register, and use the shorter "sld" and "sst" instructions. The -mep option is on by default if you optimize. -mno-prolog-function -mprolog-function Do not use (do use) external functions to save and restore regis- ters at the prologue and epilogue of a function. The external functions are slower, but use less code space if more than one function saves the same number of registers. The -mprolog-function option is on by default if you optimize. -mspace Try to make the code as small as possible. At present, this just turns on the -mep and -mprolog-function options. -mtda=n Put static or global variables whose size is n bytes or less into the tiny data area that register "ep" points to. The tiny data area can hold up to 256 bytes in total (128 bytes for byte refer- ences). -msda=n Put static or global variables whose size is n bytes or less into the small data area that register "gp" points to. The small data area can hold up to 64 kilobytes. -mzda=n Put static or global variables whose size is n bytes or less into the first 32 kilobytes of memory. -mv850 Specify that the target processor is the V850. -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. -mapp-regs This option will cause r2 and r5 to be used in the code generated by the compiler. This setting is the default. -mno-app-regs This option will cause r2 and r5 to be treated as fixed registers. -mv850e Specify that the target processor is the V850E. The preprocessor constant __v850e__ will be defined if this option is used. If neither -mv850 nor -mv850e are defined then a default target processor will be chosen and the relevant __v850*__ preprocessor constant will be defined. The preprocessor constants __v850 and __v851__ are always defined, regardless of which processor variant is the target. -mdisable-callt This option will suppress generation of the CALLT instruction for the v850e flavors of the v850 architecture. The default is -mno- disable-callt which allows the CALLT instruction to be used. ARC Options These options are defined for ARC implementations: -EL Compile code for little endian mode. This is the default. -EB Compile code for big endian mode. -mmangle-cpu Prepend the name of the cpu to all public symbol names. In multi- ple-processor systems, there are many ARC variants with different instruction and register set characteristics. This flag prevents code compiled for one cpu to be linked with code compiled for another. No facility exists for handling variants that are ``almost identical''. This is an all or nothing option. -mcpu=cpu Compile code for ARC variant cpu. Which variants are supported depend on the configuration. All variants support -mcpu=base, this is the default. -mtext=text-section -mdata=data-section -mrodata=readonly-data-section Put functions, data, and readonly data in text-section, data-sec- tion, and readonly-data-section respectively by default. This can be overridden with the "section" attribute. NS32K Options These are the -m options defined for the 32000 series. The default values for these options depends on which style of 32000 was selected when the compiler was configured; the defaults for the most common choices are given below. -m32032 -m32032 Generate output for a 32032. This is the default when the compiler is configured for 32032 and 32016 based systems. -m32332 -m32332 Generate output for a 32332. This is the default when the compiler is configured for 32332-based systems. -m32532 -m32532 Generate output for a 32532. This is the default when the compiler is configured for 32532-based systems. -m32081 Generate output containing 32081 instructions for floating point. This is the default for all systems. -m32381 Generate output containing 32381 instructions for floating point. This also implies -m32081. The 32381 is only compatible with the 32332 and 32532 cpus. This is the default for the pc532-netbsd configuration. -mmulti-add Try and generate multiply-add floating point instructions "polyF" and "dotF". This option is only available if the -m32381 option is in effect. Using these instructions requires changes to register allocation which generally has a negative impact on performance. This option should only be enabled when compiling code particularly likely to make heavy use of multiply-add instructions. -mnomulti-add Do not try and generate multiply-add floating point instructions "polyF" and "dotF". This is the default on all platforms. -msoft-float Generate output containing library calls for floating point. Warn- ing: the requisite libraries may not be available. -mieee-compare -mno-ieee-compare Control whether or not the compiler uses IEEE floating point com- parisons. These handle correctly the case where the result of a comparison is unordered. Warning: the requisite kernel support may not be available. -mnobitfield Do not use the bit-field instructions. On some machines it is faster to use shifting and masking operations. This is the default for the pc532. -mbitfield Do use the bit-field instructions. This is the default for all platforms except the pc532. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return pop their arguments on return with the "ret" instruction. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries com- piled with the Unix compiler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.) This option takes its name from the 680x0 "rtd" instruction. -mregparam Use a different function-calling convention where the first two arguments are passed in registers. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries com- piled with the Unix compiler. -mnoregparam Do not pass any arguments in registers. This is the default for all targets. -msb It is OK to use the sb as an index register which is always loaded with zero. This is the default for the pc532-netbsd target. -mnosb The sb register is not available for use or has not been initial- ized to zero by the run time system. This is the default for all targets except the pc532-netbsd. It is also implied whenever -mhimem or -fpic is set. -mhimem Many ns32000 series addressing modes use displacements of up to 512MB. If an address is above 512MB then displacements from zero can not be used. This option causes code to be generated which can be loaded above 512MB. This may be useful for operating systems or ROM code. -mnohimem Assume code will be loaded in the first 512MB of virtual address space. This is the default for all platforms. AVR Options These options are defined for AVR implementations: -mmcu=mcu Specify ATMEL AVR instruction set or MCU type. Instruction set avr1 is for the minimal AVR core, not supported by the C compiler, only for assembler programs (MCU types: at90s1200, attiny10, attiny11, attiny12, attiny15, attiny28). Instruction set avr2 (default) is for the classic AVR core with up to 8K program memory space (MCU types: at90s2313, at90s2323, attiny22, at90s2333, at90s2343, at90s4414, at90s4433, at90s4434, at90s8515, at90c8534, at90s8535). Instruction set avr3 is for the classic AVR core with up to 128K program memory space (MCU types: atmega103, atmega603, at43usb320, at76c711). Instruction set avr4 is for the enhanced AVR core with up to 8K program memory space (MCU types: atmega8, atmega83, atmega85). Instruction set avr5 is for the enhanced AVR core with up to 128K program memory space (MCU types: atmega16, atmega161, atmega163, atmega32, atmega323, atmega64, atmega128, at43usb355, at94k). -msize Output instruction sizes to the asm file. -minit-stack=N Specify the initial stack address, which may be a symbol or numeric value, __stack is the default. -mno-interrupts Generated code is not compatible with hardware interrupts. Code size will be smaller. -mcall-prologues Functions prologues/epilogues expanded as call to appropriate sub- routines. Code size will be smaller. -mno-tablejump Do not generate tablejump insns which sometimes increase code size. -mtiny-stack Change only the low 8 bits of the stack pointer. MCore Options These are the -m options defined for the Motorola M*Core processors. -mhardlit -mno-hardlit Inline constants into the code stream if it can be done in two instructions or less. -mdiv -mno-div Use the divide instruction. (Enabled by default). -mrelax-immediate -mno-relax-immediate Allow arbitrary sized immediates in bit operations. -mwide-bitfields -mno-wide-bitfields Always treat bit-fields as int-sized. -m4byte-functions -mno-4byte-functions Force all functions to be aligned to a four byte boundary. -mcallgraph-data -mno-callgraph-data Emit callgraph information. -mslow-bytes -mno-slow-bytes Prefer word access when reading byte quantities. -mlittle-endian -mbig-endian Generate code for a little endian target. -m210 -m340 Generate code for the 210 processor. IA-64 Options These are the -m options defined for the Intel IA-64 architecture. -mbig-endian Generate code for a big endian target. This is the default for HP- UX. -mlittle-endian Generate code for a little endian target. This is the default for AIX5 and Linux. -mgnu-as -mno-gnu-as Generate (or don't) code for the GNU assembler. This is the default. -mgnu-ld -mno-gnu-ld Generate (or don't) code for the GNU linker. This is the default. -mno-pic Generate code that does not use a global pointer register. The result is not position independent code, and violates the IA-64 ABI. -mvolatile-asm-stop -mno-volatile-asm-stop Generate (or don't) a stop bit immediately before and after volatile asm statements. -mb-step Generate code that works around Itanium B step errata. -mregister-names -mno-register-names Generate (or don't) in, loc, and out register names for the stacked registers. This may make assembler output more readable. -mno-sdata -msdata Disable (or enable) optimizations that use the small data section. This may be useful for working around optimizer bugs. -mconstant-gp Generate code that uses a single constant global pointer value. This is useful when compiling kernel code. -mauto-pic Generate code that is self-relocatable. This implies -mconstant- gp. This is useful when compiling firmware code. -minline-float-divide-min-latency Generate code for inline divides of floating point values using the minimum latency algorithm. -minline-float-divide-max-throughput Generate code for inline divides of floating point values using the maximum throughput algorithm. -minline-int-divide-min-latency Generate code for inline divides of integer values using the mini- mum latency algorithm. -minline-int-divide-max-throughput Generate code for inline divides of integer values using the maxi- mum throughput algorithm. -mno-dwarf2-asm -mdwarf2-asm Don't (or do) generate assembler code for the DWARF2 line number debugging info. This may be useful when not using the GNU assem- bler. -mfixed-range=register-range Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator can not use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register ranges can be specified separated by a comma. D30V Options These -m options are defined for D30V implementations: -mextmem Link the .text, .data, .bss, .strings, .rodata, .rodata1, .data1 sections into external memory, which starts at location "0x80000000". -mextmemory Same as the -mextmem switch. -monchip Link the .text section into onchip text memory, which starts at location "0x0". Also link .data, .bss, .strings, .rodata, .rodata1, .data1 sections into onchip data memory, which starts at location "0x20000000". -mno-asm-optimize -masm-optimize Disable (enable) passing -O to the assembler when optimizing. The assembler uses the -O option to automatically parallelize adjacent short instructions where possible. -mbranch-cost=n Increase the internal costs of branches to n. Higher costs means that the compiler will issue more instructions to avoid doing a branch. The default is 2. -mcond-exec=n Specify the maximum number of conditionally executed instructions that replace a branch. The default is 4. S/390 and zSeries Options These are the -m options defined for the S/390 and zSeries architec- ture. -mhard-float -msoft-float Use (do not use) the hardware floating-point instructions and reg- isters for floating-point operations. When -msoft-float is speci- fied, functions in libgcc.a will be used to perform floating-point operations. When -mhard-float is specified, the compiler generates IEEE floating-point instructions. This is the default. -mbackchain -mno-backchain Generate (or do not generate) code which maintains an explicit backchain within the stack frame that points to the caller's frame. This is currently needed to allow debugging. The default is to generate the backchain. -msmall-exec -mno-small-exec Generate (or do not generate) code using the "bras" instruction to do subroutine calls. This only works reliably if the total exe- cutable size does not exceed 64k. The default is to use the "basr" instruction instead, which does not have this limitation. -m64 -m31 When -m31 is specified, generate code compliant to the Linux for S/390 ABI. When -m64 is specified, generate code compliant to the Linux for zSeries ABI. This allows GCC in particular to generate 64-bit instructions. For the s390 targets, the default is -m31, while the s390x targets default to -m64. -mmvcle -mno-mvcle Generate (or do not generate) code using the "mvcle" instruction to perform block moves. When -mno-mvcle is specified, use a "mvc" loop instead. This is the default. -mdebug -mno-debug Print (or do not print) additional debug information when compil- ing. The default is to not print debug information. CRIS Options These options are defined specifically for the CRIS ports. -march=architecture-type -mcpu=architecture-type Generate code for the specified architecture. The choices for architecture-type are v3, v8 and v10 for respectively ETRAX 4, ETRAX 100, and ETRAX 100 LX. Default is v0 except for cris-axis- linux-gnu, where the default is v10. -mtune=architecture-type Tune to architecture-type everything applicable about the generated code, except for the ABI and the set of available instructions. The choices for architecture-type are the same as for -march=archi- tecture-type. -mmax-stack-frame=n Warn when the stack frame of a function exceeds n bytes. -melinux-stacksize=n Only available with the cris-axis-aout target. Arranges for indi- cations in the program to the kernel loader that the stack of the program should be set to n bytes. -metrax4 -metrax100 The options -metrax4 and -metrax100 are synonyms for -march=v3 and -march=v8 respectively. -mpdebug Enable CRIS-specific verbose debug-related information in the assembly code. This option also has the effect to turn off the #NO_APP formatted-code indicator to the assembler at the beginning of the assembly file. -mcc-init Do not use condition-code results from previous instruction; always emit compare and test instructions before use of condition codes. -mno-side-effects Do not emit instructions with side-effects in addressing modes other than post-increment. -mstack-align -mno-stack-align -mdata-align -mno-data-align -mconst-align -mno-const-align These options (no-options) arranges (eliminate arrangements) for the stack-frame, individual data and constants to be aligned for the maximum single data access size for the chosen CPU model. The default is to arrange for 32-bit alignment. ABI details such as structure layout are not affected by these options. -m32-bit -m16-bit -m8-bit Similar to the stack- data- and const-align options above, these options arrange for stack-frame, writable data and constants to all be 32-bit, 16-bit or 8-bit aligned. The default is 32-bit align- ment. -mno-prologue-epilogue -mprologue-epilogue With -mno-prologue-epilogue, the normal function prologue and epi- logue that sets up the stack-frame are omitted and no return instructions or return sequences are generated in the code. Use this option only together with visual inspection of the compiled code: no warnings or errors are generated when call-saved registers must be saved, or storage for local variable needs to be allocated. -mno-gotplt -mgotplt With -fpic and -fPIC, don't generate (do generate) instruction sequences that load addresses for functions from the PLT part of the GOT rather than (traditional on other architectures) calls to the PLT. The default is -mgotplt. -maout Legacy no-op option only recognized with the cris-axis-aout target. -melf Legacy no-op option only recognized with the cris-axis-elf and cris-axis-linux-gnu targets. -melinux Only recognized with the cris-axis-aout target, where it selects a GNU/linux-like multilib, include files and instruction set for -march=v8. -mlinux Legacy no-op option only recognized with the cris-axis-linux-gnu target. -sim This option, recognized for the cris-axis-aout and cris-axis-elf arranges to link with input-output functions from a simulator library. Code, initialized data and zero-initialized data are allocated consecutively. -sim2 Like -sim, but pass linker options to locate initialized data at 0x40000000 and zero-initialized data at 0x80000000. MMIX Options These options are defined for the MMIX: -mlibfuncs -mno-libfuncs Specify that intrinsic library functions are being compiled, pass- ing all values in registers, no matter the size. -mepsilon -mno-epsilon Generate floating-point comparison instructions that compare with respect to the "rE" epsilon register. -mabi=mmixware -mabi=gnu Generate code that passes function parameters and return values that (in the called function) are seen as registers "$0" and up, as opposed to the GNU ABI which uses global registers "$231" and up. -mzero-extend -mno-zero-extend When reading data from memory in sizes shorter than 64 bits, use (do not use) zero-extending load instructions by default, rather than sign-extending ones. -mknuthdiv -mno-knuthdiv Make the result of a division yielding a remainder have the same sign as the divisor. With the default, -mno-knuthdiv, the sign of the remainder follows the sign of the dividend. Both methods are arithmetically valid, the latter being almost exclusively used. -mtoplevel-symbols -mno-toplevel-symbols Prepend (do not prepend) a : to all global symbols, so the assembly code can be used with the "PREFIX" assembly directive. -melf Generate an executable in the ELF format, rather than the default mmo format used by the mmix simulator. -mbranch-predict -mno-branch-predict Use (do not use) the probable-branch instructions, when static branch prediction indicates a probable branch. -mbase-addresses -mno-base-addresses Generate (do not generate) code that uses base addresses. Using a base address automatically generates a request (handled by the assembler and the linker) for a constant to be set up in a global register. The register is used for one or more base address requests within the range 0 to 255 from the value held in the reg- ister. The generally leads to short and fast code, but the number of different data items that can be addressed is limited. This means that a program that uses lots of static data may require -mno-base-addresses. -msingle-exit -mno-single-exit Force (do not force) generated code to have a single exit point in each function. PDP-11 Options These options are defined for the PDP-11: -mfpu Use hardware FPP floating point. This is the default. (FIS float- ing point on the PDP-11/40 is not supported.) -msoft-float Do not use hardware floating point. -mac0 Return floating-point results in ac0 (fr0 in Unix assembler syn- tax). -mno-ac0 Return floating-point results in memory. This is the default. -m40 Generate code for a PDP-11/40. -m45 Generate code for a PDP-11/45. This is the default. -m10 Generate code for a PDP-11/10. -mbcopy-builtin Use inline "movstrhi" patterns for copying memory. This is the default. -mbcopy Do not use inline "movstrhi" patterns for copying memory. -mint16 -mno-int32 Use 16-bit "int". This is the default. -mint32 -mno-int16 Use 32-bit "int". -mfloat64 -mno-float32 Use 64-bit "float". This is the default. -mfloat32 -mno-float64 Use 32-bit "float". -mabshi Use "abshi2" pattern. This is the default. -mno-abshi Do not use "abshi2" pattern. -mbranch-expensive Pretend that branches are expensive. This is for experimenting with code generation only. -mbranch-cheap Do not pretend that branches are expensive. This is the default. -msplit Generate code for a system with split I&D. -mno-split Generate code for a system without split I&D. This is the default. -munix-asm Use Unix assembler syntax. This is the default when configured for pdp11-*-bsd. -mdec-asm Use DEC assembler syntax. This is the default when configured for any PDP-11 target other than pdp11-*-bsd. Xstormy16 Options These options are defined for Xstormy16: -msim Choose startup files and linker script suitable for the simulator. FRV Options -mgpr-32 Only use the first 32 general purpose registers. -mgpr-64 Use all 64 general purpose registers. -mfpr-32 Use only the first 32 floating point registers. -mfpr-64 Use all 64 floating point registers -mhard-float Use hardware instructions for floating point operations. -msoft-float Use library routines for floating point operations. -malloc-cc Dynamically allocate condition code registers. -mfixed-cc Do not try to dynamically allocate condition code registers, only use "icc0" and "fcc0". -mdword Change ABI to use double word insns. -mno-dword Do not use double word instructions. -mdouble Use floating point double instructions. -mno-double Do not use floating point double instructions. -mmedia Use media instructions. -mno-media Do not use media instructions. -mmuladd Use multiply and add/subtract instructions. -mno-muladd Do not use multiply and add/subtract instructions. -mlibrary-pic Enable PIC support for building libraries -macc-4 Use only the first four media accumulator registers. -macc-8 Use all eight media accumulator registers. -mpack Pack VLIW instructions. -mno-pack Do not pack VLIW instructions. -mno-eflags Do not mark ABI switches in e_flags. -mcond-move Enable the use of conditional-move instructions (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-cond-move Disable the use of conditional-move instructions. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mscc Enable the use of conditional set instructions (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-scc Disable the use of conditional set instructions. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mcond-exec Enable the use of conditional execution (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-cond-exec Disable the use of conditional execution. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mvliw-branch Run a pass to pack branches into VLIW instructions (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-vliw-branch Do not run a pass to pack branches into VLIW instructions. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mmulti-cond-exec Enable optimization of "&&" and "||" in conditional execution (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-multi-cond-exec Disable optimization of "&&" and "||" in conditional execution. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mnested-cond-exec Enable nested conditional execution optimizations (default). This switch is mainly for debugging the compiler and will likely be removed in a future version. -mno-nested-cond-exec Disable nested conditional execution optimizations. This switch is mainly for debugging the compiler and will likely be removed in a future version. -mtomcat-stats Cause gas to print out tomcat statistics. -mcpu=cpu Select the processor type for which to generate code. Possible values are simple, tomcat, fr500, fr400, fr300, frv. Xtensa Options The Xtensa architecture is designed to support many different configu- rations. The compiler's default options can be set to match a particu- lar Xtensa configuration by copying a configuration file into the GCC sources when building GCC. The options below may be used to override the default options. -mbig-endian -mlittle-endian Specify big-endian or little-endian byte ordering for the target Xtensa processor. -mdensity -mno-density Enable or disable use of the optional Xtensa code density instruc- tions. -mmac16 -mno-mac16 Enable or disable use of the Xtensa MAC16 option. When enabled, GCC will generate MAC16 instructions from standard C code, with the limitation that it will use neither the MR register file nor any instruction that operates on the MR registers. When this option is disabled, GCC will translate 16-bit multiply/accumulate operations to a combination of core instructions and library calls, depending on whether any other multiplier options are enabled. -mmul16 -mno-mul16 Enable or disable use of the 16-bit integer multiplier option. When enabled, the compiler will generate 16-bit multiply instruc- tions for multiplications of 16 bits or smaller in standard C code. When this option is disabled, the compiler will either use 32-bit multiply or MAC16 instructions if they are available or generate library calls to perform the multiply operations using shifts and adds. -mmul32 -mno-mul32 Enable or disable use of the 32-bit integer multiplier option. When enabled, the compiler will generate 32-bit multiply instruc- tions for multiplications of 32 bits or smaller in standard C code. When this option is disabled, the compiler will generate library calls to perform the multiply operations using either shifts and adds or 16-bit multiply instructions if they are available. -mnsa -mno-nsa Enable or disable use of the optional normalization shift amount ("NSA") instructions to implement the built-in "ffs" function. -mminmax -mno-minmax Enable or disable use of the optional minimum and maximum value instructions. -msext -mno-sext Enable or disable use of the optional sign extend ("SEXT") instruc- tion. -mbooleans -mno-booleans Enable or disable support for the boolean register file used by Xtensa coprocessors. This is not typically useful by itself but may be required for other options that make use of the boolean reg- isters (e.g., the floating-point option). -mhard-float -msoft-float Enable or disable use of the floating-point option. When enabled, GCC generates floating-point instructions for 32-bit "float" opera- tions. When this option is disabled, GCC generates library calls to emulate 32-bit floating-point operations using integer instruc- tions. Regardless of this option, 64-bit "double" operations are always emulated with calls to library functions. -mfused-madd -mno-fused-madd Enable or disable use of fused multiply/add and multiply/subtract instructions in the floating-point option. This has no effect if the floating-point option is not also enabled. Disabling fused multiply/add and multiply/subtract instructions forces the compiler to use separate instructions for the multiply and add/subtract operations. This may be desirable in some cases where strict IEEE 754-compliant results are required: the fused multiply add/subtract instructions do not round the intermediate result, thereby produc- ing results with more bits of precision than specified by the IEEE standard. Disabling fused multiply add/subtract instructions also ensures that the program output is not sensitive to the compiler's ability to combine multiply and add/subtract operations. -mserialize-volatile -mno-serialize-volatile When this option is enabled, GCC inserts "MEMW" instructions before "volatile" memory references to guarantee sequential consistency. The default is -mserialize-volatile. Use -mno-serialize-volatile to omit the "MEMW" instructions. -mtext-section-literals -mno-text-section-literals Control the treatment of literal pools. The default is -mno-text- section-literals, which places literals in a separate section in the output file. This allows the literal pool to be placed in a data RAM/ROM, and it also allows the linker to combine literal pools from separate object files to remove redundant literals and improve code size. With -mtext-section-literals, the literals are interspersed in the text section in order to keep them as close as possible to their references. This may be necessary for large assembly files. -mtarget-align -mno-target-align When this option is enabled, GCC instructs the assembler to auto- matically align instructions to reduce branch penalties at the expense of some code density. The assembler attempts to widen den- sity instructions to align branch targets and the instructions fol- lowing call instructions. If there are not enough preceding safe density instructions to align a target, no widening will be per- formed. The default is -mtarget-align. These options do not affect the treatment of auto-aligned instructions like "LOOP", which the assembler will always align, either by widening density instructions or by inserting no-op instructions. -mlongcalls -mno-longcalls When this option is enabled, GCC instructs the assembler to trans- late direct calls to indirect calls unless it can determine that the target of a direct call is in the range allowed by the call instruction. This translation typically occurs for calls to func- tions in other source files. Specifically, the assembler trans- lates a direct "CALL" instruction into an "L32R" followed by a "CALLX" instruction. The default is -mno-longcalls. This option should be used in programs where the call target can potentially be out of range. This option is implemented in the assembler, not the compiler, so the assembly code generated by GCC will still show direct call instructions---look at the disassembled object code to see the actual instructions. Note that the assembler will use an indirect call for every cross-file call, not just those that really will be out of range. Options for Code Generation Conventions These machine-independent options control the interface conventions used in code generation. Most of them have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing no- or adding it. -fbounds-check For front-ends that support it, generate additional code to check that indices used to access arrays are within the declared range. This is currently only supported by the Java and Fortran 77 front- ends, where this option defaults to true and false respectively. -ftrapv This option generates traps for signed overflow on addition, sub- traction, multiplication operations. -fexceptions Enable exception handling. Generates extra code needed to propa- gate exceptions. For some targets, this implies GCC will generate frame unwind information for all functions, which can produce sig- nificant data size overhead, although it does not affect execution. If you do not specify this option, GCC will enable it by default for languages like C++ which normally require exception handling, and disable it for languages like C that do not normally require it. However, you may need to enable this option when compiling C code that needs to interoperate properly with exception handlers written in C++. You may also wish to disable this option if you are compiling older C++ programs that don't use exception handling. -fnon-call-exceptions Generate code that allows trapping instructions to throw excep- tions. Note that this requires platform-specific runtime support that does not exist everywhere. Moreover, it only allows trapping instructions to throw exceptions, i.e. memory references or float- ing point instructions. It does not allow exceptions to be thrown from arbitrary signal handlers such as "SIGALRM". -funwind-tables Similar to -fexceptions, except that it will just generate any needed static data, but will not affect the generated code in any other way. You will normally not enable this option; instead, a language processor that needs this handling would enable it on your behalf. -fasynchronous-unwind-tables Generate unwind table in dwarf2 format, if supported by target machine. The table is exact at each instruction boundary, so it can be used for stack unwinding from asynchronous events (such as debugger or garbage collector). -fpcc-struct-return Return ``short'' "struct" and "union" values in memory like longer ones, rather than in registers. This convention is less efficient, but it has the advantage of allowing intercallability between GCC- compiled files and files compiled with other compilers, particu- larly the Portable C Compiler (pcc). The precise convention for returning structures in memory depends on the target configuration macros. Short structures and unions are those whose size and alignment match that of some integer type. Warning: code compiled with the -fpcc-struct-return switch is not binary compatible with code compiled with the -freg-struct-return switch. Use it to conform to a non-default application binary interface. -freg-struct-return Return "struct" and "union" values in registers when possible. This is more efficient for small structures than -fpcc-struct- return. If you specify neither -fpcc-struct-return nor -freg-struct-return, GCC defaults to whichever convention is standard for the target. If there is no standard convention, GCC defaults to -fpcc-struct- return, except on targets where GCC is the principal compiler. In those cases, we can choose the standard, and we chose the more efficient register return alternative. Warning: code compiled with the -freg-struct-return switch is not binary compatible with code compiled with the -fpcc-struct-return switch. Use it to conform to a non-default application binary interface. -fshort-enums Allocate to an "enum" type only as many bytes as it needs for the declared range of possible values. Specifically, the "enum" type will be equivalent to the smallest integer type which has enough room. Warning: the -fshort-enums switch causes GCC to generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. -fshort-double Use the same size for "double" as for "float". Warning: the -fshort-double switch causes GCC to generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. -fshort-wchar Override the underlying type for wchar_t to be short unsigned int instead of the default for the target. This option is useful for building programs to run under WINE. Warning: the -fshort-wchar switch causes GCC to generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. -fshared-data Requests that the data and non-"const" variables of this compila- tion be shared data rather than private data. The distinction makes sense only on certain operating systems, where shared data is shared between processes running the same program, while private data exists in one copy per process. -fno-common In C, allocate even uninitialized global variables in the data sec- tion of the object file, rather than generating them as common blocks. This has the effect that if the same variable is declared (without "extern") in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the program will work on other systems which always work this way. -fno-ident Ignore the #ident directive. -fno-gnu-linker Do not output global initializations (such as C++ constructors and destructors) in the form used by the GNU linker (on systems where the GNU linker is the standard method of handling them). Use this option when you want to use a non-GNU linker, which also requires using the collect2 program to make sure the system linker includes constructors and destructors. (collect2 is included in the GCC distribution.) For systems which must use collect2, the compiler driver gcc is configured to do this automatically. -finhibit-size-directive Don't output a ".size" assembler directive, or anything else that would cause trouble if the function is split in the middle, and the two halves are placed at locations far apart in memory. This option is used when compiling crtstuff.c; you should not need to use it for anything else. -fverbose-asm Put extra commentary information in the generated assembly code to make it more readable. This option is generally only of use to those who actually need to read the generated assembly code (per- haps while debugging the compiler itself). -fno-verbose-asm, the default, causes the extra information to be omitted and is useful when comparing two assembler files. -fvolatile Consider all memory references through pointers to be volatile. -fvolatile-global Consider all memory references to extern and global data items to be volatile. GCC does not consider static data items to be volatile because of this switch. -fvolatile-static Consider all memory references to static data to be volatile. -fpic Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses all constant addresses through a global offset table (GOT). The dynamic loader resolves the GOT entries when the pro- gram starts (the dynamic loader is not part of GCC; it is part of the operating system). If the GOT size for the linked executable exceeds a machine-specific maximum size, you get an error message from the linker indicating that -fpic does not work; in that case, recompile with -fPIC instead. (These maximums are 16k on the m88k, 8k on the SPARC, and 32k on the m68k and RS/6000. The 386 has no such limit.) Position-independent code requires special support, and therefore works only on certain machines. For the 386, GCC supports PIC for System V but not for the Sun 386i. Code generated for the IBM RS/6000 is always position-independent. -fPIC If supported for the target machine, emit position-independent code, suitable for dynamic linking and avoiding any limit on the size of the global offset table. This option makes a difference on the m68k, m88k, and the SPARC. Position-independent code requires special support, and therefore works only on certain machines. -ffixed-reg Treat the register named reg as a fixed register; generated code should never refer to it (except perhaps as a stack pointer, frame pointer or in some other fixed role). reg must be the name of a register. The register names accepted are machine-specific and are defined in the "REGISTER_NAMES" macro in the machine description macro file. This flag does not have a negative form, because it specifies a three-way choice. -fcall-used-reg Treat the register named reg as an allocable register that is clob- bered by function calls. It may be allocated for temporaries or variables that do not live across a call. Functions compiled this way will not save and restore the register reg. It is an error to used this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed per- vasive roles in the machine's execution model will produce disas- trous results. This flag does not have a negative form, because it specifies a three-way choice. -fcall-saved-reg Treat the register named reg as an allocable register saved by functions. It may be allocated even for temporaries or variables that live across a call. Functions compiled this way will save and restore the register reg if they use it. It is an error to used this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed per- vasive roles in the machine's execution model will produce disas- trous results. A different sort of disaster will result from the use of this flag for a register in which function values may be returned. This flag does not have a negative form, because it specifies a three-way choice. -fpack-struct Pack all structure members together without holes. Warning: the -fpack-struct switch causes GCC to generate code that is not binary compatible with code generated without that switch. Additionally, it makes the code suboptimal. Use it to conform to a non-default application binary interface. -finstrument-functions Generate instrumentation calls for entry and exit to functions. Just after function entry and just before function exit, the fol- lowing profiling functions will be called with the address of the current function and its call site. (On some platforms, "__builtin_return_address" does not work beyond the current func- tion, so the call site information may not be available to the pro- filing functions otherwise.) void __cyg_profile_func_enter (void *this_fn, void *call_site); void __cyg_profile_func_exit (void *this_fn, void *call_site); The first argument is the address of the start of the current func- tion, which may be looked up exactly in the symbol table. This instrumentation is also done for functions expanded inline in other functions. The profiling calls will indicate where, concep- tually, the inline function is entered and exited. This means that addressable versions of such functions must be available. If all your uses of a function are expanded inline, this may mean an addi- tional expansion of code size. If you use extern inline in your C code, an addressable version of such functions must be provided. (This is normally the case anyways, but if you get lucky and the optimizer always expands the functions inline, you might have got- ten away without providing static copies.) A function may be given the attribute "no_instrument_function", in which case this instrumentation will not be done. This can be used, for example, for the profiling functions listed above, high- priority interrupt routines, and any functions from which the pro- filing functions cannot safely be called (perhaps signal handlers, if the profiling routines generate output or allocate memory). -fstack-check Generate code to verify that you do not go beyond the boundary of the stack. You should specify this flag if you are running in an environment with multiple threads, but only rarely need to specify it in a single-threaded environment since stack overflow is auto- matically detected on nearly all systems if there is only one stack. Note that this switch does not actually cause checking to be done; the operating system must do that. The switch causes generation of code to ensure that the operating system sees the stack being extended. -fstack-limit-register=reg -fstack-limit-symbol=sym -fno-stack-limit Generate code to ensure that the stack does not grow beyond a cer- tain value, either the value of a register or the address of a sym- bol. If the stack would grow beyond the value, a signal is raised. For most targets, the signal is raised before the stack overruns the boundary, so it is possible to catch the signal without taking special precautions. For instance, if the stack starts at absolute address 0x80000000 and grows downwards, you can use the flags -fstack-limit-sym- bol=__stack_limit and -Wl,--defsym,__stack_limit=0x7ffe0000 to enforce a stack limit of 128KB. Note that this may only work with the GNU linker. -fargument-alias -fargument-noalias -fargument-noalias-global Specify the possible relationships among parameters and between parameters and global data. -fargument-alias specifies that arguments (parameters) may alias each other and may alias global storage.-fargument-noalias speci- fies that arguments do not alias each other, but may alias global storage.-fargument-noalias-global specifies that arguments do not alias each other and do not alias global storage. Each language will automatically use whatever option is required by the language standard. You should not need to use these options yourself. -fleading-underscore This option and its counterpart, -fno-leading-underscore, forcibly change the way C symbols are represented in the object file. One use is to help link with legacy assembly code. Warning: the -fleading-underscore switch causes GCC to generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. Not all targets provide complete support for this switch. -ftls-model=model Alter the thread-local storage model to be used. The model argu- ment should be one of "global-dynamic", "local-dynamic", "ini- tial-exec" or "local-exec". The default without -fpic is "initial-exec"; with -fpic the default is "global-dynamic".
ENVIRONMENT
This section describes several environment variables that affect how GCC operates. Some of them work by specifying directories or prefixes to use when searching for various kinds of files. Some are used to specify other aspects of the compilation environment. Note that you can also specify places to search using options such as -B, -I and -L. These take precedence over places specified using envi- ronment variables, which in turn take precedence over those specified by the configuration of GCC. LANG LC_CTYPE LC_MESSAGES LC_ALL These environment variables control the way that GCC uses localiza- tion information that allow GCC to work with different national conventions. GCC inspects the locale categories LC_CTYPE and LC_MESSAGES if it has been configured to do so. These locale cate- gories can be set to any value supported by your installation. A typical value is en_UK for English in the United Kingdom. The LC_CTYPE environment variable specifies character classifica- tion. GCC uses it to determine the character boundaries in a string; this is needed for some multibyte encodings that contain quote and escape characters that would otherwise be interpreted as a string end or escape. The LC_MESSAGES environment variable specifies the language to use in diagnostic messages. If the LC_ALL environment variable is set, it overrides the value of LC_CTYPE and LC_MESSAGES; otherwise, LC_CTYPE and LC_MESSAGES default to the value of the LANG environment variable. If none of these variables are set, GCC defaults to traditional C English behavior. TMPDIR If TMPDIR is set, it specifies the directory to use for temporary files. GCC uses temporary files to hold the output of one stage of compilation which is to be used as input to the next stage: for example, the output of the preprocessor, which is the input to the compiler proper. GCC_EXEC_PREFIX If GCC_EXEC_PREFIX is set, it specifies a prefix to use in the names of the subprograms executed by the compiler. No slash is added when this prefix is combined with the name of a subprogram, but you can specify a prefix that ends with a slash if you wish. If GCC_EXEC_PREFIX is not set, GCC will attempt to figure out an appropriate prefix to use based on the pathname it was invoked with. If GCC cannot find the subprogram using the specified prefix, it tries looking in the usual places for the subprogram. The default value of GCC_EXEC_PREFIX is prefix/lib/gcc-lib/ where prefix is the value of "prefix" when you ran the configure script. Other prefixes specified with -B take precedence over this prefix. This prefix is also used for finding files such as crt0.o that are used for linking. In addition, the prefix is used in an unusual way in finding the directories to search for header files. For each of the standard directories whose name normally begins with /usr/local/lib/gcc-lib (more precisely, with the value of GCC_INCLUDE_DIR), GCC tries replacing that beginning with the specified prefix to produce an alternate directory name. Thus, with -Bfoo/, GCC will search foo/bar where it would normally search /usr/local/lib/bar. These alternate directories are searched first; the standard directories come next. COMPILER_PATH The value of COMPILER_PATH is a colon-separated list of directo- ries, much like PATH. GCC tries the directories thus specified when searching for subprograms, if it can't find the subprograms using GCC_EXEC_PREFIX. LIBRARY_PATH The value of LIBRARY_PATH is a colon-separated list of directories, much like PATH. When configured as a native compiler, GCC tries the directories thus specified when searching for special linker files, if it can't find them using GCC_EXEC_PREFIX. Linking using GCC also uses these directories when searching for ordinary libraries for the -l option (but directories specified with -L come first). LANG This variable is used to pass locale information to the compiler. One way in which this information is used is to determine the char- acter set to be used when character literals, string literals and comments are parsed in C and C++. When the compiler is configured to allow multibyte characters, the following values for LANG are recognized: C-JIS Recognize JIS characters. C-SJIS Recognize SJIS characters. C-EUCJP Recognize EUCJP characters. If LANG is not defined, or if it has some other value, then the compiler will use mblen and mbtowc as defined by the default locale to recognize and translate multibyte characters. Some additional environments variables affect the behavior of the pre- processor. CPATH C_INCLUDE_PATH CPLUS_INCLUDE_PATH OBJC_INCLUDE_PATH Each variable's value is a list of directories separated by a spe- cial character, much like PATH, in which to look for header files. The special character, "PATH_SEPARATOR", is target-dependent and determined at GCC build time. For Windows-based targets it is a semicolon, and for almost all other targets it is a colon. CPATH specifies a list of directories to be searched as if speci- fied with -I, but after any paths given with -I options on the com- mand line. This environment variable is used regardless of which language is being preprocessed. The remaining environment variables apply only when preprocessing the particular language indicated. Each specifies a list of direc- tories to be searched as if specified with -isystem, but after any paths given with -isystem options on the command line. In all these variables, an empty element instructs the compiler to search its current working directory. Empty elements can appear at the beginning or end of a path. For instance, if the value of CPATH is ":/special/include", that has the same effect as -I. -I/special/include. DEPENDENCIES_OUTPUT If this variable is set, its value specifies how to output depen- dencies for Make based on the non-system header files processed by the compiler. System header files are ignored in the dependency output. The value of DEPENDENCIES_OUTPUT can be just a file name, in which case the Make rules are written to that file, guessing the target name from the source file name. Or the value can have the form file target, in which case the rules are written to file file using target as the target name. In other words, this environment variable is equivalent to combin- ing the options -MM and -MF, with an optional -MT switch too. SUNPRO_DEPENDENCIES This variable is the same as DEPENDENCIES_OUTPUT (see above), except that system header files are not ignored, so it implies -M rather than -MM. However, the dependence on the main input file is omitted.
BUGS
For instructions on reporting bugs, see <http://gcc.gnu.org/bugs.html>. Use of the gccbug script to report bugs is recommended.
FOOTNOTES
1. On some systems, gcc -shared needs to build supplementary stub code for constructors to work. On multi-libbed systems, gcc -shared must select the correct support libraries to link against. Failing to supply the correct flags may lead to subtle defects. Supplying them in cases where they are not necessary is innocuous.
SEE ALSO
cpp(1), gcov(1), g77(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1) and the Info entries for gcc, cpp, g77, as, ld, binutils and gdb.
AUTHOR
See the Info entry for gcc, or <http://gcc.gnu.org/onlinedocs/gcc/Con- tributors.html>, for contributors to GCC.
COPYRIGHT
Copyright (c) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with the Invariant Sections being ``GNU General Public License'' and ``Funding Free Software'', the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development. 3rd Berkeley Distribution gcc-3.3.3 GCC(1)
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.