GROFF_MS(7) GROFF_MS(7)
NAME
groff_ms - groff ms macros
SYNOPSIS
groff -ms [ options... ] [ files... ] groff -m ms [ options... ] [ files... ]
DESCRIPTION
This manual page describes the GNU version of the ms macros, part of the groff typesetting system. The ms macros are mostly compatible with the documented behavior of the 4.3 BSD Unix ms macros (see Differences from troff ms below for details). The ms macros are suitable for reports, letters, books, and technical documentation.
USAGE
The ms macro package expects files to have a certain amount of struc- ture. The simplest documents can begin with a paragraph macro and con- sist of text separated by paragraph macros or even blank lines. Longer documents have a structure as follows: Document type If you use the RP (report) macro at the beginning of the docu- ment, groff prints the cover page information on its own page; otherwise it prints the information on the first page with your document text immediately following. Other document formats found in AT&T troff are specific to AT&T or Berkeley, and are not supported in groff ms. Format and layout By setting number registers, you can change your document's type (font and size), margins, spacing, headers and footers, and footnotes. See Document control registers below for more details. Cover page A cover page consists of a title, and optionally the author's name and institution, an abstract, and the date. See Cover page macros below for more details. Body Following the cover page is your document. It consists of para- graphs, headings, and lists. Table of contents Longer documents usually include a table of contents, which you can add by placing the TC macro at the end of your document. Document control registers The following table lists the document control number registers. For the sake of consistency, set registers related to margins at the begin- ning of your document, or just after the RP macro. Margin settings cb s cb s s cb s cb s afCW s l s s l s l s. Reg. Defini- tion Effective Default _ PO T{ Page offset (left margin) T} T{ next page T} 1i LL T{ Line length T} next para. 6i LT T{ Header/footer length T} next para. 6i HM T{ Top (header) margin T} next page 1i FM T{ Bottom (footer) margin T} next page 1i _ Text settings cb s cb s s cb s cb s afCW s l s s l s l s. Reg. Defini- tion Effective Default _ PS T{ Point size T} next para. 10p VS T{ Line spacing (leading) T} next para. 12p _ Paragraph settings cb cb s cb cb afCW l s l l . Reg. Definition Effec- tive Default _ PI T{ Initial indent T} next para. 5n PD T{ Space between paragraphs T} next para. 0.3v QI T{ Quoted paragraph indent T} next para. 5n _ Footnote settings cb cb cb cb afCW l l l . Reg. Definition Effective Default _ FL Footnote length next footnote \n[LL]*5/6 FI Foot- note indent next footnote 2n FF Footnote format next footnote 0 FPS Point size next footnote \n[PS]-2 FVS Vert. spacing next footnote \n[FPS]+2 FPD Para. spac- ing next footnote \n[PD]/2 _ Other settings cb s cb s s cb s cb s afCW s l s s l s l s. Reg. Defini- tion Effective Default _ MINGW T{ Minimum width between columns T} next page 2n _ Cover page macros Use the following macros to create a cover page for your document in the order shown. .RP [no] Specifies the report format for your document. The report for- mat creates a separate cover page. With no RP macro, groff prints a subset of the cover page on page 1 of your document. If you use the optional no argument, groff prints a title page but does not repeat any of the title page information (title, author, abstract, etc.) on page 1 of the document. .P1 (P-one) Prints the header on page 1. The default is to suppress the header. .DA [xxx] (optional) Print the current date, or the arguments to the macro if any, on the title page (if specified) and in the footers. This is the default for nroff. .ND [xxx] (optional) Print the current date, or the arguments to the macro if any, on the title page (if specified) but not in the footers. This is the default for troff. .TL Specifies the document title. Groff collects text following the TL macro into the title, until reaching the author name or abstract. .AU Specifies the author's name. You can specify multiple authors by using an AU macro for each author. .AI Specifies the author's institution. You can specify multiple institutions. .AB [no] Begins the abstract. The default is to print the word ABSTRACT, centered and in italics, above the text of the abstract. The option no suppresses this heading. .AE End the abstract. Paragraphs Use the PP macro to create indented paragraphs, and the LP macro to create paragraphs with no initial indent. The QP macro indents all text at both left and right margins. The effect is identical to the HTML <BLOCKQUOTE> element. The next para- graph or heading returns margins to normal. The XP macro produces an exdented paragraph. The first line of the paragraph begins at the left margin, and subsequent lines are indented (the opposite of PP). Headings Use headings to create a hierarchical structure for your document. The ms macros print headings in bold using the same font family and point size as the body text. The following heading macros are available: .NH xx Numbered heading. The argument xx is either a numeric argument to indicate the level of the heading, or S xx xx "..." to set the section number explicitly. If you specify heading levels out of sequence, such as invoking .NH 3 after .NH 1, groff prints a warning on standard error. .SH Unnumbered subheading. Highlighting The ms macros provide a variety of methods to highlight or emphasize text: .B [txt [post [pre]]] Sets its first argument in bold type. If you specify a second argument, groff prints it in the previous font after the bold text, with no intervening space (this allows you to set punctua- tion after the highlighted text without highlighting the punctu- ation). Similarly, it prints the third argument (if any) in the previous font before the first argument. For example, .B foo ) ( prints (foo). If you give this macro no arguments, groff prints all text fol- lowing in bold until the next highlighting, paragraph, or head- ing macro. .R [txt [post [pre]]] Sets its first argument in roman (or regular) type. It operates similarly to the B macro otherwise. .I [txt [post [pre]]] Sets its first argument in italic type. It operates similarly to the B macro otherwise. .CW [txt [post [pre]]] Sets its first argument in a constant width face. It operates similarly to the B macro otherwise. .BI [txt [post [pre]]] Sets its first argument in bold italic type. It operates simi- larly to the B macro otherwise. .BX [txt] Prints its argument and draws a box around it. If you want to box a string that contains spaces, use a digit-width space (\0). .UL [txt [post]] Prints its first argument with an underline. If you specify a second argument, groff prints it in the previous font after the underlined text, with no intervening space. .LG Prints all text following in larger type (2 points larger than the current point size) until the next font size, highlighting, paragraph, or heading macro. You can specify this macro multi- ple times to enlarge the point size as needed. .SM Prints all text following in smaller type (2 points smaller than the current point size) until the next type size, highlighting, paragraph, or heading macro. You can specify this macro multi- ple times to reduce the point size as needed. .NL Prints all text following in the normal point size (that is, the value of the PS register). \*{text\*} Print the enclosed text as a superscript. Indents You may need to indent sections of text. A typical use for indents is to create nested lists and sublists. Use the RS and RE macros to start and end a section of indented text, respectively. The PI register controls the amount of indent. You can nest indented sections as deeply as needed by using multiple, nested pairs of RS and RE. Lists The IP macro handles duties for all lists. Its syntax is as follows: .IP [marker [width]] The marker is usually a bullet character \(bu for unordered lists, a number (or auto-incrementing number register) for num- bered lists, or a word or phrase for indented (glossary-style) lists. The width specifies the indent for the body of each list item. Once specified, the indent remains the same for all list items in the document until specified again. Tab stops Use the ta request to set tab stops as needed. Use the TA macro to reset tabs to the default (every 5n). You can redefine the TA macro to create a different set of default tab stops. Displays and keeps Use displays to show text-based examples or figures (such as code list- ings). Displays turn off filling, so lines of code can be displayed as-is without inserting br requests in between each line. Displays can be kept on a single page, or allowed to break across pages. The fol- lowing table shows the display types available. cb s s s cbt s s cb s cb s ^ s s lfCW s lfCW s l s s. Display macro Type of display With keep No keep _ .DS L .LD Left-justified. .DS I [indent] .ID T{ Indented (default indent in the DI register). T} .DS B .BD T{ Block-centered (left-justified, longest line centered). T} .DS C .CD Centered. .DS R .RD Right-justified. _ Use the DE macro to end any display type. The macros Ds and De are aliases for DS and DE, respectively. To keep text together on a page, such as a paragraph that refers to a table (or list, or other item) immediately following, use the KS and KE macros. The KS macro begins a block of text to be kept on a single page, and the KE macro ends the block. You can specify a floating keep using the KF and KE macros. If the keep cannot fit on the current page, groff holds the contents of the keep and allows text following the keep (in the source file) to fill in the remainder of the current page. When the page breaks, whether by an explicit bp request or by reaching the end of the page, groff prints the floating keep at the top of the new page. This is useful for printing large graphics or tables that do not need to appear exactly where specified. Tables, figures, equations, and references The -ms macros support the standard groff preprocessors: tbl, pic, eqn, and refer. Mark text meant for preprocessors by enclosing it in pairs of tags as follows: .TS [H] and .TE Denotes a table, to be processed by the tbl preprocessor. The optional H argument instructs groff to create a running header with the information up to the TH macro. Groff prints the header at the beginning of the table; if the table runs onto another page, groff prints the header on the next page as well. .PS and .PE Denotes a graphic, to be processed by the pic preprocessor. You can create a pic file by hand, using the AT&T pic manual avail- able on the Web as a reference, or by using a graphics program such as xfig. .EQ [align] and .EN Denotes an equation, to be processed by the eqn preprocessor. The optional align argument can be C, L, or I to center (the default), left-justify, or indent the equation. .[ and .] Denotes a reference, to be processed by the refer preprocessor. The GNU refer(1) manual page provides a comprehensive reference to the preprocessor and the format of the bibliographic data- base. Footnotes The ms macros provide a flexible footnote system. You can specify a numbered footnote by using the \** escape, followed by the text of the footnote enclosed by FS and FE macros. You can specify symbolic footnotes by placing the mark character (such as \(dg for the dagger character) in the body text, followed by the text of the footnote enclosed by FS \(dg and FE macros. You can control how groff prints footnote numbers by changing the value of the FF register as follows: 0 Prints the footnote number as a superscript; indents the footnote (default). 1 Prints the number followed by a period (like 1.) and indents the footnote. 2 Like 1, without an indent. 3 Like 1, but prints the footnote number as a hanging para- graph. You can use footnotes safely within keeps and displays, but avoid using numbered footnotes within floating keeps. You can set a second \** between a \** and its corresponding .FS; as long as each .FS occurs after the corresponding \** and the occurrences of .FS are in the same order as the corresponding occurrences of \**. Headers and footers There are two ways to define headers and footers: · Use the strings LH, CH, and RH to set the left, center, and right headers; use LF, CF, and RF to set the left, center, and right foot- ers. This works best for documents that do not distinguish between odd and even pages. · Use the OH and EH macros to define headers for the odd and even pages; and OF and EF macros to define footers for the odd and even pages. This is more flexible than defining the individual strings. The syntax for these macros is as follows: .OH 'left'center'right' You can replace the quote (') marks with any character not appearing in the header or footer text. Margins You control margins using a set of number registers. The following ta- ble lists the register names and defaults: cb s cb s s cb s cb s afCW s l s s l s l s. Reg. Defini- tion Effective Default _ PO T{ Page offset (left margin) T} next page 1i LL T{ Line length T} next para. 6i LT T{ Header/footer length T} next para. 6i HM T{ Top (header) margin T} next page 1i FM T{ Bottom (footer) margin T} next page 1i _ Note that there is no right margin setting. The combination of page offset and line length provide the information necessary to derive the right margin. Multiple columns The ms macros can set text in as many columns as will reasonably fit on the page. The following macros are available. All of them force a page break if a multi-column mode is already set. However, if the cur- rent mode is single-column, starting a multi-column mode does not force a page break. .1C Single-column mode. .2C Two-column mode. .MC [width [gutter]] Multi-column mode. If you specify no arguments, it is equiva- lent to the 2C macro. Otherwise, width is the width of each column and gutter is the space between columns. The MINGW num- ber register is the default gutter width. Creating a table of contents Wrap text that you want to appear in the table of contents in XS and XE macros. Use the TC macro to print the table of contents at the end of the document, resetting the page number to i (Roman numeral 1). You can manually create a table of contents by specifying a page number as the first argument to XS. Add subsequent entries using the XA macro. For example: .XS 1 Introduction .XA 2 A Brief History of the Universe .XA 729 Details of Galactic Formation ... .XE Use the PX macro to print a manually-generated table of contents with- out resetting the page number. If you give the argument no to either PX or TC, groff suppresses print- ing the title specified by the \*[TOC] string. DIFFERENCES FROM troff ms The groff ms macros are a complete re-implementation, using no original AT&T code. Since they take advantage of the extended features in groff, they cannot be used with AT&T troff. Other differences include: · The internals of groff ms differ from the internals of Unix ms. Documents that depend upon implementation details of Unix ms may not format properly with groff ms. · The error-handling policy of groff ms is to detect and report errors, rather than silently to ignore them. · Bell Labs localisms are not implemented. · Berkeley localisms, in particular the TM and CT macros, are not implemented. · Groff ms does not work in compatibility mode (e.g. with the -C option). · There is no support for typewriter-like devices. · Groff ms does not provide cut marks. · Multiple line spacing is not supported (use a larger vertical spac- ing instead). · Some Unix ms documentation says that the CW and GW number registers can be used to control the column width and gutter width respec- tively. These number registers are not used in groff ms. · Macros that cause a reset (paragraphs, headings, etc.) may change the indent. Macros that change the indent do not increment or decrement the indent, but rather set it absolutely. This can cause problems for documents that define additional macros of their own. The solution is to use not the in request but instead the RS and RE macros. · The number register GS is set to 1 by the groff ms macros, but is not used by the Unix ms macros. Documents that need to determine whether they are being formatted with Unix ms or groff ms should use this number register. Strings You can redefine the following strings to adapt the groff ms macros to languages other than English: center; cb cb afCW l . String Default Value _ REFERENCES Refer- ences ABSTRACT ABSTRACT TOC Table of Contents MONTH1 January MONTH2 February MONTH3 March MONTH4 April MONTH5 May MONTH6 June MONTH7 July MONTH8 August MONTH9 September MONTH10 October MONTH11 November MONTH12 December _ The \*- string produces an em dash -- like this. Text Settings The FAM string sets the default font family. If this string is unde- fined at initialization, it is set to Times. The point size, vertical spacing, and inter-paragraph spacing for foot- notes are controlled by the number registers FPS, FVS, and FPD; at ini- tialization these are set to \n(PS-2, \n[FPS]+2, and \n(PD/2 respec- tively. If any of these registers are defined before initialization, the initialization macro does not change them. The hyphenation flags (as set by the hy request) are set from the HY register; the default is 14. Improved accent marks (as originally defined in Berkeley's ms version) are available by specifying the AM macro at the beginning of your docu- ment. You can place an accent over most characters by specifying the string defining the accent directly after the character. For example, n\*~ produces an n with a tilde over it.
NAMING CONVENTIONS
The following conventions are used for names of macros, strings and number registers. External names available to documents that use the groff ms macros contain only uppercase letters and digits. Internally the macros are divided into modules; naming conventions are as follows: · Names used only within one module are of the form module*name. · Names used outside the module in which they are defined are of the form module@name. · Names associated with a particular environment are of the form environment:name; these are used only within the par module. · name does not have a module prefix. · Constructed names used to implement arrays are of the form array!index. Thus the groff ms macros reserve the following names: · Names containing the characters *, @, and :. · Names containing only uppercase letters and digits.
FILES
/usr/share/tmac/ms.tmac (a wrapper file for s.tmac) /usr/share/tmac/s.tmac
SEE ALSO
groff(1), troff(1), tbl(1), pic(1), eqn(1), refer(1), Groff: The GNU Implementation of troff by Trent Fisher and Werner Lemberg.
AUTHOR
Original manual page by James Clark et al; rewritten by Larry Kollar (lkollar@despammed.com). Groff Version 1.19.1 30 July 2004 GROFF_MS(7)
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.