cgd(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
CGD(4)                  NetBSD Kernel Interfaces Manual                 CGD(4)


NAME

     cgd -- cryptographic disk driver


SYNOPSIS

     pseudo-device cgd [count]


DESCRIPTION

     The cgd driver provides the capability of encrypting blocks on their way
     to and from a disk or partition.

     In order to compile support for the cgd into your kernel, you must add
     the driver to your kernel configuration file.  To do this, add a line
     similar to:

           pseudo-device   cgd     4       # cryptographic disk driver

     The count argument defines how many cgd's may be configured at a time.

   Encryption Algorithms
     Currently the following cryptographic algorithms are supported:

     aes-cbc        AES in CBC mode.  AES uses a 128 bit blocksize and can
                    accept keys of length 128, 192, or 256.  The default key
                    length is 128.

     3des-cbc       Triple DES in CBC mode.  Triple DES uses a 64 bit block-
                    size and is performed in EDE3 mode with a 168 bit key.
                    The key passed to the kernel is 192 bits but the parity
                    bits are ignored.

     blowfish-cbc   Blowfish in CBC mode.  Blowfish uses a 64 bit blocksize
                    and can accept keys of length 128.

   IV Methods
     Currently, the only IV Method supported is encblkno (Encrypted Block Num-
     ber).  This method encrypts the block number of the physical disk block
     with the cipher and key provided and uses that as the IV for CBC mode.
     This method should ensure that each block has a different IV and that the
     IV is reasonably unpredictable.

   IOCTLS
     A cgd responds to all of the standard disk ioctl(2) calls defined in
     sd(4), and also defines the following:

     CGDIOCSET  configure the cgd.  This ioctl(2) sets up the encryption
                parameters and points the cgd at the underlying disk.

     CGDIOCCLR  unconfigures the cgd.

     These ioctl(2)'s and their associated data structures are defined in
     /usr/include/dev/cgdvar.h.


WARNINGS

     It goes without saying that if you forget the passphrase that you used to
     configure a cgd, then you have irrevocably lost all of the data on the
     disk.  Please ensure that you are using an appropriate backup strategy.


FILES

     /dev/{,r}cgd*      cgd device special files.


SEE ALSO

     ioctl(2), sd(4), MAKEDEV(8), cgdconfig(8), config(8)


HISTORY

     The cgd driver was written by Roland C. Dowdeswell for NetBSD.  The cgd
     driver originally appeared in NetBSD 2.0.

NetBSD 3.0.2                    August 14, 2003                   NetBSD 3.0.2