slattach(8) - NetBSD Manual Pages

SLATTACH(8)             NetBSD System Manager's Manual             SLATTACH(8)


NAME
slattach, slip -- attach serial lines as network interfaces
SYNOPSIS
slattach [-Hhlmn] [-s baudrate] [-t ldisc] ttyname
DESCRIPTION
slattach is used to assign a tty line to a network interface, and to define the network source and destination addresses. The following oper- ands are supported by slattach: -H Turn on DTR/CTS flow control. By default, no flow control is done. -h Turn on RTS/CTS flow control. By default, no flow control is done. -l Turn on the CLOCAL flag, making it possible to run SLIP on a cable without modem control signals (e.g. DTR, DSR, DCD). -m Maintain modem control signals after closing the line. Specifically, this disables HUPCL. -n Don't detach from invoking tty. -s baudrate Specifies the speed of the connection. If not specified, the default of 9600 is used. -t ldisc Specifies the line discipline to use for the tty. Sup- ported line disciplines are ``slip'' (creates a sl(4) instance) and ``strip'' (creates a strip(4) instance). If this option is not specified, the default is ``slip''. ttyname Specifies the name of the tty device. ttyname should be a string of the form `ttyXX', or `/dev/ttyXX'. In addition, the following flags to ifconfig(8) control various proper- ties of a SLIP link: link0 Turn on Van Jacobsen header compression. -link0 Turn off header compression. link1 Don't pass through ICMP packets. -link1 Do pass through ICMP packets. link2 If a packet with a compressed header is received, automati- cally enable compression of outgoing packets. -link2 Don't auto-enable compression. Only the super-user may attach a network interface. To detach the interface, use ``ifconfig interface-name down'' after killing off the slattach process. Interface-name is the name that is shown by netstat(1).
EXAMPLES
slattach ttyh8 slattach -s 4800 /dev/tty01
DIAGNOSTICS
Messages indicating that the specified interface does not exist, the requested address is unknown, or that the user is not privileged but tried to alter an interface's configuration.
SEE ALSO
netstat(1), daemon(3), netintro(4), sl(4), strip(4), ifconfig(8), rc(8)
HISTORY
The slattach command appeared in 4.3BSD. NetBSD 3.0.1 September 3, 1999 NetBSD 3.0.1

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.