siop(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
SIOP(4)                 NetBSD Kernel Interfaces Manual                SIOP(4)


NAME

     siop - Symbios Logic/NCR 53c8xx SCSI driver


SYNOPSIS

     siop* at pci? dev ? function ?
     options SIOP_SYMLED
     scsibus* at siop?


DESCRIPTION

     The siop driver provides support for the Symbios Logic/NCR 53x8xx series
     of SCSI controller chips:

           -   53c810, 53c810a and 53c815 (Fast SCSI)
           -   53c820, 53c825 and 53c825a (Fast-Wide SCSI)
           -   53c860 (Ultra SCSI)
           -   53c875 and 53c875j (Ultra-Wide SCSI)
           -   53c876 (Dual Ultra-Wide SCSI)
           -   53c885 (Ultra-Wide SCSI and Ethernet)
           -   53c895 (Ultra2-Wide SCSI)
           -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
           -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
           -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     The SIOP_SYMLED option causes the driver to report SCSI activity on the
     GPIO pin 1, which is connected to the activity LED on some adapters. At
     this time only the 53c895 based Symbios and Tekram adapters are known to
     require this.

     If both siop and the esiop(4) drivers are compiled, esiop(4) will take
     precedence for controllers it supports.


SEE ALSO

     cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)


HISTORY

     The siop driver first appeared in NetBSD 1.5.


AUTHORS

     The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for
     NetBSD.


BUGS

     siop supports the 53c1010-33 in Ultra2-wide mode only. Use esiop(4) for
     Ultra160 support.

NetBSD 2.1                       May 15, 2000                       NetBSD 2.1