stat(1) - NetBSD Manual Pages

STAT(1)                 NetBSD General Commands Manual                 STAT(1)


NAME
stat, readlink - display file status
SYNOPSIS
stat [-FLnq] [-f format | -l | -r | -s | -x] [-t timefmt] [file ...] readlink [-n] [file ...]
DESCRIPTION
The stat utility displays information about the file pointed to by file. Read, write or execute permissions of the named file are not required, but all directories listed in the path name leading to the file must be searchable. If no argument is given, stat displays information about the file descriptor for standard input. When invoked as readlink, only the target of the symbolic link is printed. If the given argument is not a symbolic link, readlink will print nothing and exit with an error. The information displayed is obtained by calling lstat(2) with the given argument and evaluating the returned structure. The options are as follows: -F As in ls, display a slash (/) immediately after each pathname that is a directory, an asterisk (*) after each that is exe- cutable, an at sign (@) after each symbolic link, a percent sign (%) after each whiteout, an equal sign (=) after each socket, and a vertical bar (|) after each that is a FIFO. The use of -F implies -l. -L Use stat(2) instead of lstat(2). The information reported by stat will refer to the target of file, if file is a symbolic link, and not to file itself. -n Do not force a newline to appear at the end of each piece of out- put. -q Suppress failure messages if calls to stat(2) or lstat(2) fail. When run as readlink, error messages are automatically sup- pressed. -f format Display information using the specified format. See the FORMATS section for a description of valid formats. -l Display output in ls -lT format. -r Display raw information. That is, for all the fields in the stat-structure, display the raw, numerical value (for example, times in seconds since the epoch, etc.) -s Display information in ``shell output'', suitable for initializ- ing variables. -x Display information in a more verbose way as known from some Linux distributions. -t timefmt Display timestamps using the specified format. This format is passed directly to strftime(3). FORMATS Format strings are similar to printf(3) formats in that they start with %, are then followed by a sequence of formatting characters, and end in a character that selects the field of the struct stat which is to be for- matted. If the % is immediately followed by one of n, t, %, or @, then a newline character, a tab character, a percent character, or the current file number is printed, otherwise the string is examined for the follow- ing: Any of the following optional flags: # Selects an alternate output form for octal and hexadecimal out- put. Non-zero octal output will have a leading zero, and non- zero hexadecimal output will have ``0x'' prepended to it. + Asserts that a sign indicating whether a number is positive or negative should always be printed. Non-negative numbers are not usually printed with a sign. - Aligns string output to the left of the field, instead of to the right. 0 Sets the fill character for left padding to the 0 character, instead of a space. space Reserves a space at the front of non-negative signed output fields. A `+' overrides a space if both are used. Then the following fields: size An optional decimal digit string specifying the minimum field width. prec An optional precision composed of a decimal point `.' and a deci- mal digit string that indicates the maximum string length, the number of digits to appear after the decimal point in floating point output, or the minimum number of digits to appear in numeric output. fmt An optional output format specifier which is one of D, O, U, X, F, or S. These represent signed decimal output, octal output, unsigned decimal output, hexadecimal output, floating point out- put, and string output, respectively. Some output formats do not apply to all fields. Floating point output only applies to time- spec fields (the a, m, and c fields). The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with amc Display date in strftime(3) format. dr Display actual device name. gu Display group or user name. p Display the mode of file as in ls -lTd. N Displays the name of file. T Displays the type of file. Y Insert a `` -> '' into the output. Note that the default output format for Y is a string, but if specified explic- itly, these four characters are prepended. sub An optional sub field specifier (high, middle, low). Only applies to the p, d, r, and T output formats. It can be one of the following: H ``High'' -- specifies the major number for devices from r or d, the ``user'' bits for permissions from the string form of p, the file ``type'' bits from the numeric forms of p, and the long output form of T. L ``Low'' -- specifies the minor number for devices from r or d, the ``other'' bits for permissions from the string form of p, the ``user'', ``group'', and ``other'' bits from the numeric forms of p, and the ls -F style output character for file type when used with T (the use of L for this is optional). M ``Middle'' -- specifies the ``group'' bits for permis- sions from the string output form of p, or the ``suid'', ``sgid'', and ``sticky'' bits for the numeric forms of p. datum A required field specifier, being one of the following: d Device upon which file resides. i file's inode number. p File type and permissions. l Number of hard links to file. u, g User-id and group-id of file's owner. r Device number for character and block device special files. a, m, c, B The time file was last accessed or modified, of when the inode was last changed, or the birth time of the inode. z The size of file in bytes. b Number of blocks allocated for file. k Optimal file system I/O operation block size. f User defined flags for file. v Inode generation number. The following four field specifiers are not drawn directly from the data in struct stat, but are N The name of the file. T The file type, either as in ls -F or in a more descrip- tive form if the sub field specifier H is given. Y The target of a symbolic link. Z Expands to ``major,minor'' from the rdev field for char- acter or block special devices and gives size output for all others. Only the % and the field specifier are required. Most field specifiers default to U as an output form, with the exception of p which defaults to O, a, m, and c which default to D, and Y, T, and N, which default to S.
EXIT STATUS
stat exits 0 on success, and >0 if an error occurred.
EXAMPLES
Given a symbolic link ``foo'' that points from /tmp/foo to /, you would use stat as follows: > stat -F /tmp/foo lrwxrwxrwx 1 jschauma cs 1 Apr 24 16:37:28 2002 /tmp/foo@ -> / > stat -LF /tmp/foo drwxr-xr-x 16 root wheel 512 Apr 19 10:57:54 2002 /tmp/foo/ To initialize some shell-variables, you could use the -s flag as follows: > csh % eval set `stat -s .cshrc` % echo $st_size $st_mtimespec 1148 1015432481 > sh $ eval $(stat -s .profile) $ echo $st_size $st_mtimespec 1148 1015432481 In order to get a list of the kind of files including files pointed to if the file is a symbolic link, you could use the following format: $ stat -f "%N: %HT%SY" /tmp/* /tmp/bar: Symbolic Link -> /tmp/foo /tmp/output25568: Regular File /tmp/blah: Directory /tmp/foo: Symbolic Link -> / In order to get a list of the devices, their types and the major and minor device numbers, formatted with tabs and linebreaks, you could use the following format: stat -f "Name: %N%n%tType: %HT%n%tMajor: %Hr%n%tMinor: %Lr%n%n" /dev/* [...] Name: /dev/wt8 Type: Block Device Major: 3 Minor: 8 Name: /dev/zero Type: Character Device Major: 2 Minor: 12 In order to determine the permissions set on a file separately, you could use the following format: > stat -f "%Sp -> owner=%SHp group=%SMp other=%SLp" . drwxr-xr-x -> owner=rwx group=r-x other=r-x In order to determine the three files that have been modified most recently, you could use the following format: > stat -f "%m%t%Sm %N" /tmp/* | sort -rn | head -3 | cut -f2- Apr 25 11:47:00 2002 /tmp/blah Apr 25 10:36:34 2002 /tmp/bar Apr 24 16:47:35 2002 /tmp/foo
SEE ALSO
file(1), ls(1), lstat(2), readlink(2), stat(2), printf(3), strftime(3)
HISTORY
The stat utility appeared in NetBSD 1.6.
AUTHORS
The stat utility was written by Andrew Brown <atatat@NetBSD.org>. This man page was written by Jan Schaumann <jschauma@NetBSD.org>. NetBSD 2.0 May 8, 2003 NetBSD 2.0

Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.