uax(4) - NetBSD Manual Pages

Command:
Section:
Arch:
Collection:
>>>
UAX(4)                  NetBSD Kernel Interfaces Manual                 UAX(4)


NAME

     uax - ASIX AX88172 USB Ethernet driver


SYNOPSIS

     uax*   at uhub?
     XXphy* at mii?


HARDWARE

     The uax driver supports the following adapters:

           D-Link DUB-E100


DESCRIPTION

     The uax driver provides support for USB (2.0) Ethernet adapters based on
     the ASIX AX88172 chip.

     The chip contains a 10/100 Ethernet MAC with MII interface and is
     designed to work with both Ethernet and HomePNA transceivers.  The chip
     support USB 2.0 so it can handle 100 Mb/s data.

     The uax driver supports the following media types:

     autoselect            Enable automatic selection of the media type and
                           options.

     10baseT/UTP           Set 10Mbps operation.  The mediaopt option can also
                           be used to enable full-duplex operation.  Not spec-
                           ifying full duplex implies half-duplex mode.

     100baseTX             Set 100Mbps (fast Ethernet) operation.  The
                           mediaopt option can also be used to enable
                           full-duplex operation.  Not specifying full duplex
                           implies half-duplex mode.

     The uax driver supports the following media options:

     full-duplex           Force full duplex operation.  The interface will
                           operate in half duplex mode if this media option is
                           not specified.

     For more information on configuring this device, see ifconfig(8).


SEE ALSO

     arp(4), netintro(4), usb(4), ifconfig(8)

     ASIX AX88172 data sheet, http://www.asix.com.tw.


HISTORY

     The uax device driver first appeared in NetBSD 2.0.

NetBSD 2.0.2                   February 16, 2003                  NetBSD 2.0.2