CGDCONFIG(8) NetBSD System Manager's Manual CGDCONFIG(8)
NAME
cgdconfig - configuration utility for the cryptographic disk driver
SYNOPSIS
cgdconfig [-nv] cgd dev [paramsfile] cgdconfig -C [-nv] [-f configfile] cgdconfig -U [-nv] [-f configfile] cgdconfig -G [-nv] [-k kgmeth] [-o outfile] paramsfile cgdconfig -g [-nv] [-i ivmeth] [-k kgmeth] [-o outfile] alg [keylen] cgdconfig -s [-nv] [-i ivmeth] cgd dev alg [keylen] cgdconfig -u [-nv] cgd
DESCRIPTION
cgdconfig is used to configure and unconfigure cryptographic disk devices (cgds) and to maintain the configuration files that are associated with them. For more information about cryptographic disk devices see cgd(4). The options are as follows: -C Configure all the devices listed in the cgd configuration file. -f configfile Specify the configuration file explicitly, rather than using the default configuration file /etc/cgd/cgd.conf. -G Generate a new paramsfile (to stdout) using the values from paramsfile which will generate the same key. This may need to prompt for multiple passphrases. -g Generate a paramsfile (to stdout). -i ivmeth Specify the IV method (default: encblkno). -k kgmeth Specify the key generation method (default: pkcs5_pbkdf2/sha1). -o outfile When generating a paramsfile, store it in outfile. -s Read the key from stdin. -U Unconfigure all the devices listed in the cgd configura- tion file. -u Unconfigure a cgd. -V vmeth Specify the verification method (default: none). -v Be verbose. May be specified multiple times. For more information about the cryptographic algorithms and IV methods supported, please refer to cgd(4). Key Generation Methods To generate the key which it will use, cgdconfig evaluates all of the key generation methods in the parameters file and uses the exclusive-or of the outputs of all the methods. The methods and descriptions are as fol- lows: pkcs5_pbkdf2/sha1 This method requires a passphrase which is entered at configuration time. It is a salted hmac-based scheme detailed in ``PKCS#5 v2.0: Password-Based Cryptography Standard'', RSA Laboratories, March 25, 1999, pages 8-10. PKCS #5 was also republished as RFC 2898. pkcs5_pbkdf2 This is an earlier, slightly incorrect and deprecated implementation of the above algorithm. It is retained for backwards compatibility with existing parameters files, and will be removed. Existing parameters files should be converted to use the correct method using the -G option, and a new passphrase. randomkey The method simply reads /dev/random and uses the resulting bits as the key. It does not require a passphrase to be entered. This method is typically used to present disk devices that do not need to sur- vive a reboot, such as the swap partition. It is also handy to facilitate overwriting the contents of a disk volume with meaningless data prior to use. storedkey This method stores its key in the parameters file. Verification Method The verification method is how cgdconfig determines if the generated key is correct. If the newly configured disk fails to verify, then cgdconfig will regenerate the key and re-configure the device. It only makes sense to specify a verification method if at least of the key generation meth- ods is error prone, e.g., uses a user-entered passphrase. The following verification methods are supported: none perform no verification. disklabel scan for a valid disklabel. ffs scan for a valid FFS file system. re-enter prompt for passphrase twice, and ensure entered passphrases are identical. This method only works with the pkcs5_pbkdf2/sha1 and pkcs5_pbkdf2 key generators. /etc/cgd/cgd.conf The file /etc/cgd/cgd.conf is used to configure cgdconfig if either of -C or -U are specified. Each line of the file is composed of either two or three tokens: cgd, target, and optional paramsfile. A `#' character is interpreted as a comment and indicates that the rest of the line should be ignored. A `\' at the end of a line indicates that the next line is a continuation of the current line. See EXAMPLES for an example of /etc/cgd/cgd.conf. Parameters File The Parameters File contains the required information to generate the key and configure a device. These files are typically generated by the -g flag and not edited by hand. When a device is configured the default parameters file is constructed by taking the basename of the target disk and prepending /etc/cgd/ to it. E.g., if the target is /dev/sd0h, then the default parameters file will be /etc/cgd/sd0h. It is possible to have more than one parameters file for a given disk which use different key generation methods but will generate the same key. To create a parameters file that is equivalent to an existing parameters file, use cgdconfig with the -G flag. See EXAMPLES for an example of this usage. The parameters file contains a list of statements each terminated with a semi-colon. Some statements can contain statement-blocks which are either a single unadorned statement, or a brace-enclosed list of semi- colon terminated statements. Three types of data are understood: integer a 32 bit signed integer. string a string. base64 a length-encoded base64 string. The following statements are defined: algorithm string Defines the cryptographic algorithm. iv-method string Defines the IV generation method. keylength integer Defines the length of the key. verify_method string Defines the verification method. keygen string statement_block Defines a key generation method. The statement_block contains statements that are specific to the key generation method. The keygen statement's statement block may contain the following state- ments: key string The key. Only used for the storedkey key generation method. iterations integer The number of iterations. Only used for pkcs5_pbkdf2/sha1 and pkcs5_pbkdf2. salt base64 The salt. Only used for pkcs5_pbkdf2/sha1 and pkcs5_pbkdf2.
FILES
/etc/cgd/ configuration directory, used to store params- files. /etc/cgd/cgd.conf cgd configuration file.
EXAMPLES
To set up and configure a cgd that uses AES with a 192 bit key in CBC mode with the IV Method `encblkno' (encrypted block number): # cgdconfig -g -o /etc/cgd/wd0e aes-cbc 192 # cgdconfig cgd0 /dev/wd0e /dev/wd0e's passphrase: When using verification methods, the first time that we configure the disk the verification method will fail. We overcome this by supplying -V none when we configure the first time to set up the disk. Here is the sequence of commands that is recommended: # cgdconfig -g -o /etc/cgd/wd0e -V disklabel aes-cbc # cgdconfig -V re-enter cgd0 /dev/wd0e /dev/wd0e's passphrase: re-enter device's passphrase: # disklabel -e -I cgd0 # cgdconfig -u cgd0 # cgdconfig cgd0 /dev/wd0e /dev/wd0e's passphrase: To create a new parameters file that will generate the same key as an old parameters file: # cgdconfig -G -o newparamsfile oldparamsfile old file's passphrase: new file's passphrase: To configure a cgd that uses Blowfish with a 200 bit key that it reads from stdin: # cgdconfig -s cgd0 /dev/sd0h blowfish-cbc 200 An example parameters file which uses PKCS#5 PBKDF2: algorithm aes-cbc; iv-method encblkno; keylength 128; verify_method none; keygen pkcs5_pbkdf2/sha1 { iterations 39361; salt AAAAgMoHiYonye6Kog \ dYJAobCHE=; }; An example parameters file which stores its key locally: algorithm aes-cbc; iv-method encblkno; keylength 256; verify_method none; keygen storedkey key AAABAK3QO6d7xzLfrXTdsgg4 \ ly2TdxkFqOkYYcbyUKu/f60L; An example /etc/cgd/cgd.conf: # # /etc/cgd/cgd.conf # Configuration file for cryptographic disk devices # # cgd target [paramsfile] cgd0 /dev/wd0e cgd1 /dev/sd0h /usr/local/etc/cgd/sd0h Note that this will store the parameters file as /etc/cgd/wd0e. And use the entered passphrase to generate the key.
SEE ALSO
cgd(4) ``PKCS #5 v2.0: Password-Based Cryptography Standard'', RSA Laboratories, March 25, 1999.
HISTORY
The cgdconfig utility appeared in NetBSD 2.0.
BUGS
Since cgdconfig uses getpass(3) to read in the passphrase, it is limited to 128 characters. NetBSD 2.0.2 March 17, 2004 NetBSD 2.0.2
Powered by man-cgi (2024-08-26). Maintained for NetBSD by Kimmo Suominen. Based on man-cgi by Panagiotis Christias.